************************************************************************************** 1 - ADMINISTRATION ************************************************************************************** 1,1 - DB #N does not exist 1,2 - Action number out of range 1,3 - User name already defined 1,4 - Database name already defined 1,5 - MDB name already defined 1,6 - User not found 1,7 - Database not found 1,8 - MDB not found 1,9 - No set team 1,10 - Database type not found 1,11 - TEAMS are not the same 1,12 - TEAM still owns databases 1,13 - Module #I not found 1,14 - No set MDB 1,15 - No more databases allowed 1,16 - No more files available 1,17 - Filing error - File already exists 1,18 - Filing error #I - Cannot open #N database file 1,19 - Filing error - Cannot open #H virgin database file 1,20 - Filing error - Cannot copy database file 1,21 - Database is already part of this MDB 1,22 - Database is not part of this MDB 1,23 - There are already #I current databases 1,24 - User is already in team 1,25 - User is not in team 1,26 - Copy of this database already exists in this MDB 1,27 - Module already exists 1,28 - Current position out of range 1,29 - Team name already defined 1,30 - Team not found 1,31 - User identity not found 1,32 - Database already current 1,33 - Database not current 1,34 - Filing error - Cannot delete database file 1,35 - Filing error - Project area does not exist 1,36 - Cannot expunge oneself!! 1,37 - This user is currently active - Cannot delete 1,38 - Actions are switched off 1,39 - File cannot be opened. Error number #I 1,40 - Buffer size of #I rejected allowable range for this implementation is #I to #I 1,41 - Buffer facility not available in this implementation 1,42 - Module 'MONITOR' does not exist 1,43 - Module 'MONITOR' has number #I, must be 0 1,44 - Module 'MONITOR' has no run file specified 1,45 - Module 'ADMIN' does not exist 1,46 - Module 'ADMIN' has number #I, must be 1 1,47 - Module 'ADMIN' has no run file specified 1,48 - Warning! Fontdirectory name is too long - it has been truncated to 32 characters. 1,49 - You cannot update the #N Db at the moment 1,50 - Unknown error 1,51 - The name input is too long ( and will be truncated ) 1,52 - Invalid number 1,53 - System database is currently locked (by you!): Use UNLOCK SYSTEM command to free it 1,54 - Cannot REPLICATE when other users in PDMS 1,55 - Module #N not found 1,56 - Project contains more than #I dbs - UPGRADE abandoned. Output files will not be complete 1,57 - Project configured for insufficient dbs. Reconfigure System db and retry 1,58 - No more dictionary DBs allowed 1,59 - The password given is longer than 6 characters long- it has been truncated 1,60 - Macro #I does not exist 1,61 - Invalid Area number. (0 - 999) 1,62 - Invalid Area number, db already at that Area! 1,63 - Foreign DBs are opened in read only mode. 1,64 - Reference DB is already a foreign DB. INCLUDE it direct from project #N. 1,65 - DB no #I is already in use. 1,66 - DB #N is not a foreign DB. 1,67 - Foreign DBs cannot be DELETEd. Use EXCLUDE command. 1,68 - Foreign DBs cannot be COPIED/CNAMED/MOVED or CHANGED. TO edit the DB use project #N. 1,69 - DB type #H is not implemented. 1,70 - DB is already in #H mode. 1,71 - Name not found. 1,72 - Illegal ISO-IR number. 1,73 - Style number out of range. 1,74 - Character set / Style combination not available. 1,75 - Bold style not available. 1,76 - Font file does not exist. 1,77 - Bold font file does not exist. 1,78 - Name:ISO-IR number mismatch. 1,79 - Internal file name mismatch. 1,80 - Warning! This change to the character set may render existing data unreadable. 1,81 - Character set specified is not a multiple-byte one. 1,82 - Font family number out of range. 1,83 - Failed to set up default font data structure. 1,84 - Fontdirectory 1,85 - Fontfamily 1,86 - Directory containing Extension font must be set first. 1,87 - Font data structure not yet built. 1,88 - IR 1,89 - Style 1,90 - Multiple-byte Font not included in Module 1,91 - Fontfamily #I not defined 1,92 - Fontfamily #I not included in module 1,95 - Special Cyrillic font is a chargeable extra - not available here 1,96 - You are trying to access a foreign language which is not available at this installation. 1,97 - Please contact your PDMS Support Centre if you require a Far East language to be enabled. 1,98 - File 1,99 - Angle 1,100 - List of USERS for project #N =============================== 1,101 - List of MDBS for project #N ============================== 1,102 - List of DBS for project #N ============================= 1,103 - List of TEAMS for project #N =============================== 1,104 - List of modules for project #N ================================= 1,105 - List of sets of copied DBS for project #N ============================================ 1,106 - List of types of DB for project #N ===================================== 1,107 - *** unset *** 1,109 - Locked 1,110 - Unlocked 1,111 - Module 1,112 - Security 1,113 - Free 1,114 - General 1,115 - Restricted 1,116 - Resume 1,117 - Open 1,118 - Mode 1,119 - Buffer 1,120 - List of macros for project #N ================================ 1,121 - List of external DBS for project #N ====================================== 1,122 - Default 1,123 - List of DBS for project #N in area #I ========================================= 1,124 - Imacro 1,125 - List of DBS of type #N 1,126 - for project #N ========================================== 1,127 - Size before compact: 1,128 - Size after compact: 1,129 - User not currently using this project 1,130 - Message sent to 1,131 - Message for 1,132 - List of messages for project #N ================================== 1,133 - Database #N Readers 1,134 - Database #N Writers 1,135 - All Readers 1,136 - All Writers 1,137 - Cannot delete #F since you have the DB open 1,138 - Session #I of #F does not exist 1,139 - #F is already referenced by #F 1,140 - Unable to determine latest session of #F 1,141 - Cannot backtrack over session #I as used in #F 1,142 - A db with database number #I is already referenced by #F 1,143 - Must set database (STLSF) attribute before setting session 1,144 - Stamp #N not found 1,145 - Database #N does not occur within #F 1,146 - No session of #F found prior to this date 1,147 - DB #N is an extract and has not been copied 1,148 - DB #N owns extracts and has not been copied 1,149 - #F is a transaction database; not valid in stamps 1,150 - N 1,151 - R 1,152 - RW 1,160 - Set team 1,161 - Create team 1,162 - Tadd 1,163 - Create db 1,164 - Copy db 1,165 - Create mdb 1,166 - Add 1,167 - Current 1,168 - From db 1,169 - To files / 1,170 - REC 1,171 - B 1,172 - RCFCopy all 1,173 - Reconfigure 1,174 - Monitor 1,175 - Finish 1,176 - To db 1,177 - From files / 1,178 - Load append / 1,179 - Write 'Dealing with exported foreign dbs' 1,180 - Dump / 1,181 - Write 'Dealing with non-foreign dbs' 1,182 - A / 1,183 - X 1,184 - DUMP 1,185 - Xref / 1,186 - Reset with / 1,187 - Reset with /REC 1,189 - Resolve db 1,190 - Errors 10 1,191 - Create user 1,192 - Restricted 1,193 - General 1,194 - Free 1,195 - Write 'Dealing with imported foreign db' 1,196 - 1,200 - Write 'Upgrading project #N ' Write 'From PDMS10 to PDMS11 ' 1,201 - Write 'Output phase ' 1,202 - Write 'Input phase ' 1,203 - Upgrade On 1,204 - 1,205 - $R6 1,206 - WRITE ' 1,207 - ' 1,210 - in area #I 1,211 - access update 1,212 - Include db 1,213 - from project #N user SYSTEM/XXXXXX 1,214 - to 1,215 - dbno #I 1,216 - $( The username and password will probably need to be modified for included dbs. $) 1,217 - access (defunct) exclusive 1,218 - access multiwrite 1,219 - fino #I 1,220 - access external 1,221 - Name is too long. Limit is #I characters 1,222 - Create Extract 1,223 - from 1,224 - Create Variant 1,225 - Create Working Extract From 1,226 - Create Working Variant From 1,227 - for 1,228 - Dadd db 1,229 - Dadd dbset 1,230 - Set dbset 1,231 - Acradd 1,232 - Set acrset 1,249 - Database file number #I is already being used. 1,250 - Bad password 1,251 - Privileges not sufficient. USER has to be FREE. 1,252 - Database number must be from 1 to 7000. 1,253 - Database number #I is already being used. 1,254 - Library sheet numbers already in use. PADDLE db cannot be copied. 1,255 - PADDLE dbs cannot be INCLUDEd. Use COPY command instead. 1,256 - Only DESIGN dbs can be EXTERNAL. 1,257 - Skew angle value out of range. 1,258 - Bold 1,259 - File number must be from 1 to 9999. 1,260 - Name string must not exceed #I characters - command ignored. 1,261 - Password cannot be in Japanese characters. USER not created. 1,262 - DB #I number not found 1,263 - Unable to release existing claimed elements 1,264 - This database type cannot have the claim mode set. 1,265 - File #N already exists, though not a PDMS Database - delete the file outside of PDMS to continue 1,266 - File #N already exists, as #H Db number #I. This may have been created by another user 1,267 - Unable to modify DB number #I as in use by user #N 1,268 - Compacting DB #N 1,269 - Unable to change DB 1,270 - Unable to backtrack DB #N. Appropriate session not found 1,271 - May only EXPUNGE multiwrite DBs 1,272 - May not expunge a DB, whilst User ( #N) is accessing it. Expunge Users first if need be 1,273 - DB number #I is a FOREIGN DB and thus may not be modified 1,274 - Unable to open DB number #I 1,275 - Unable to open DB number #I. Dabacon error #I 1,276 - Unable to get to world element for db #I 1,277 - Database #N is a Foreign database - Command not allowed 1,278 - Saving changes to System database 1,279 - This database type cannot be MULTIWRITE. 1,280 - Cannot create/include/delete a database - #N is already creating/deleting databases 1,281 - System error #I in claiming for database creation 1,282 - You may not backtrack an EXTRACT - use the REVERT command instead 1,283 - You may not backtrack a MASTER DB that owns EXTRACTs - use the REVERT command instead 1,284 - Unable to REVERT DB #N. Session #I not found 1,285 - Unable to REVERT DB #N. Elements claimed to this extract do not exist in old session 1,286 - Unable to modify DB number #I as extract descendant is in use by user #N 1,289 - A #H element cannot be created in a #H database. 1,290 - #H is not a top level element. 1,291 - Transaction DBs cannot be UPDATE 1,292 - Only Transaction DBs may be OVERWRITE 1,293 - File may be in use from another project as a Foreign database 1,294 - Cannot set #H attribute for a Foreign database 1,300 - QUIT not allowed from an administration module 1,301 - Sorry, the #N Db is in use 1,302 - Reinit 1,303 - Claim mode is not settable for UPDATE DBs 1,304 - Claim mode OFF is not settable for MULTIWRITE DBs 1,305 - Cannot open file for REPLICATE 1,306 - Cannot open OUT file for UPGRADE 1,307 - Cannot open IN file for UPGRADE 1,308 - Warning - Database #N is a copy and will not be upgraded 1,309 - Warning - Db numbers over 7000 are reserved for AVEVA use 1,310 - Users are not allowed to create #H elements 1,311 - Users are not allowed to delete #H elements 1,312 - Users are not allowed to name #H elements 1,313 - Users are not allowed to change #H attribute 1,314 - Users are not allowed to change #H attribute on #H elements 1,315 - Illegal command for #H elements - use #N syntax 1,316 - Illegal character(s) - only characters A-Z allowed in #H name 1,317 - Incorrect format for #H name 1,318 - Dbset already exists 1,319 - Dbset not found 1,320 - Current element must be a #H - not a #H 1,321 - No set #H 1,322 - #F is already in DBSET 1,323 - #F is not in DBSET 1,324 - Database or dbset #N can not be found 1,325 - A Database owned by #F is already in DBSET 1,326 - Cannot create #H elements in the system database. Navigate to the #H 1,327 - Database #N shares the same database reference number as another already defined in the set. 1,328 - MAPUPGRADE completed on database #I 1,329 - MAPUPGRADE failed on database #I 1,330 - Acrset not found 1,331 - Acr not found 1,332 - Acr is already in ACRSET 1,333 - Acr is not in ACRSET 1,334 - Cannot include self in a DBSET 1,335 - Role not found 1,336 - Scope not found 1,350 - Owner #F of new extract must have multiwrite access 1,351 - No more extracts allowed. 1,352 - Extract number must be from #I to #I. 1,353 - Extract number #I is already being used. 1,354 - Master #F owns extracts and so must have multiwrite access 1,355 - Extract #F must have multiwrite access 1,356 - Cannot delete #F since it owns extracts 1,357 - Number of extracts in MDB exceeds limit of #I 1,358 - #F must not be foreign for DROP/FLUSH/REFRESH/RELEASE/SUBMIT command 1,359 - #F must be an extract for DROP/FLUSH/REFRESH/RELEASE/SUBMIT command 1,360 - Extract #F cannot be copied 1,361 - Owner #F of new extract must not be a copy database 1,362 - Owner #F of new extract must not be a foreign database 1,363 - Extract #F cannot be reconfigured to 1,364 - Extract #N cannot be included without including it's parent extract first 1,365 - Invalid Extract range for location, from #I to #I 1,366 - WARNING: Invalid extract range from #I to #I, consumes global range from #I to #I. #H has been set to #I 1,367 - Working extract value #I is in middle of global range (#I to #I) 1,368 - Working extract value #I is in middle of range for #F (#I to #I) 1,369 - New generated name for working extract is too long 1,370 - Working extract cannot be found for user 1,371 - List of Working Extracts for project #N ========================================== 1,372 - Cannot rename a working extract 1,373 - User already has a working extract for database #N 1,374 - Database #F owns extracts - command not allowed 1,375 - Cannot create or delete working extract - its owner extract #F is primary at #F not #F the current location 1,376 - Extract creation is disabled at #F 1,377 - Unexpected dabacon error #I encountered 1,378 - Extract creation across Global network - unable to send text for #H on DB 1,379 - Cannot EXCLUDE #F without excluding the child extracts first 1,380 - Cannot create an extract above an UPDATE DB 1,381 - The Parent of extract #F is not allocated to loc #N 1,382 - Cannot create extract at #N, as parent #F is not allocated 1,383 - Cannot deallocate #F, at #N, there are child extracts dependent 1,384 - Cannot open extract #F, as one of its ancestors #F is not allocated to this location 1,385 - Number of REFBLOCKS must be from #I to #I. 1,386 - Cannot change file number of an extract 1,387 - Cannot change file number: file of corresponding name #N already exists 1,388 - Unable to rename database file #N to #N - filing error #I 1,389 - Unable to change file number as database is allocated to another location 1,390 - Database #F cannot be copied because it has extract members 1,391 - Database #F cannot be copied because it has extract members in the original project 1,392 - WARNING: Invalid extract range from #I to #I, consumes extract range for #F (#I to #I). #H has been set to #I 1,393 - WARNING: Invalid Extract range for location from #I to #I. #H has been set to #I 1,394 - Cannot create extract; maximum extract hierarchy depth exceeded 1,400 - PDMS Global System already created 1,401 - Ref attribute #H cannot be NULL 1,402 - Ref attribute #H must point to a #H element - not #F 1,403 - Integer attribute #H cannot be negative 1,404 - Text attribute #H cannot be blank 1,405 - Time attribute #H is invalid 1,406 - Time attribute #H must be greater than zero 1,407 - Location connection type #H must be 1 (on-line) or 0 (off-line) 1,408 - Location identifier #N must be exactly 3 alpha-numeric chars. If alpha-numeric, it must be in quotes 1,409 - Location identifier #H must be unique 1,410 - Invalid syntax in #H time field 1,411 - PDMS project is not Global 1,412 - Current location is not the Project Hub 1,413 - Current location is not the Project Hub or an off-line location 1,414 - Failed to recover Project Hub 1,415 - Failed to recover Primary location of DB #N 1,416 - Location #N not found 1,417 - Location with LOCID #N not found 1,418 - Location with LOCID #N has no name 1,419 - Location #N has no LOCID 1,420 - Location #N has no parent 1,421 - Location #N has already been initialised (i.e. LINIT = TRUE ) 1,422 - Location #N is the current location 1,423 - Specified database (#F) is already allocated to location #N 1,424 - Specified database (#F) is not allocated to location #N 1,425 - Cannot relocate Hub - Hub relocation already in progress 1,426 - Cannot Change Primary location of DB #N - relocation already in progress 1,427 - Specified database (#F) is not primary at the Hub location #N 1,428 - Specified database (#F) is still allocated to satellite location #N 1,429 - Specified database (#F) is primary at location #F 1,430 - Message 430 1,431 - Location #N has not been initialised 1,432 - Location #N is an off-line location 1,433 - Location #N - 1,434 - Location #N - Comms round-trip time #I ms 1,435 - Database #N is non-propagating - Command not allowed 1,436 - Specified database (#F) is not primary at current location 1,437 - Cannot delete location #N - it is the Hub 1,438 - Cannot delete location #N - it is a parent location 1,439 - Cannot delete location #N - it is an entry point to a group 1,440 - Cannot delete location #N - it has allocated DBs 1,441 - Location #N - Comms Input Packets 1,442 - Location #N - Comms Output Packets 1,443 - Location #N - Comms Input Requests 1,444 - Location #N - Comms Output Requests 1,445 - Cannot relocate on-line Hub to off-line location #N 1,446 - Allocation lists of Hub and Location #N differ 1,447 - Cannot set #H attribute for non-PADD databases 1,448 - Cannot set #F to off-line - it has at least one child 1,449 - Cannot set #F to on-line - the HUB is currently off-line 1,450 - Cannot set parent of #F - location network is invalid 1,451 - Cannot set parent of #F to NULL (make it off-line) 1,452 - Cannot set parent of #F - it is the Hub 1,453 - Cannot set parent of #F - it is currently off-line 1,454 - Cannot set parent of #F - it belongs to a group 1,455 - Cannot set parent of #F to itself 1,456 - Cannot set parent of #F to one of its descendants 1,457 - Cannot remove #F from #F - it is the exit location 1,458 - Cannot add #F to #F - it already belongs to #F 1,459 - Cannot add #F to #F - it is an ancestor 1,460 - Current project is non-Global - cannot access Global Foreign project 1,461 - #F is already primary at #F 1,462 - Cannot deallocate database - it is still allocated to descendant #F 1,463 - Cannot deallocate ALL databases at #F - it has at least one child #F 1,464 - Allocate #N at #F 1,465 - Allocate #N Primary at #F 1,466 - Allocate ALL Primary at #F 1,467 - Allocate ALL at #F 1,468 - Transfer location must be an off-line satellite 1,469 - Transfer location must be the Hub 1,470 - PDMS Global commands not available: #N 1,471 - No PDMS Global licence 1,472 - Error in TRANSFER - file #N does not exist 1,473 - Error in TRANSFER - file #N could not be renamed 1,474 - Error in TRANSFER - file #N could not be copied 1,475 - Cannot specify a time for an off-line location 1,476 - Specified location (#F) is off-line - database must be primary at the Hub 1,477 - Database (#F) primary location (#F) is off-line - command must specify the Hub 1,478 - Project Hub is off-line - command not allowed 1,479 - Generate Location #F noalloc 1,480 - Change #N Primary at #F 1,481 - $P The rest of this macro requires locations to be generated and initialised. 1,482 - Cannot transfer from #F - use PURGE OLDFILES first 1,483 - No databases are allocated at location #N 1,484 - Cannot deallocate database #F - it is primary at #F 1,485 - Cannot deallocate database #F - it is primary at descendant #F 1,486 - Deallocate ALL - #F is primary at #F - command not allowed 1,487 - DUPLIC START command not yet given 1,488 - DUPLIC START command already given - use DUPLIC CHECK 1,489 - Duplicate names report file already open 1,490 - Abnormal error when searching duplicate name list 1,491 - Cannot expunge #N DB claimed elements - updates outstanding 1,492 - Project must be LOCKED to make it Global 1,493 - Project must have only ONE user to make it Global 1,494 - Command not valid when administering another location (#N) 1,495 - System database is administered by another location - read only access 1,496 - System database for Location #N already exists 1,497 - Currently administering location #N - cannot change its LOCID 1,498 - Warning - ALLOCATE ALL does not allocate foreign databases 1,499 - Cannot Initialise - #F has unset RHOST 1,500 - Cannot locate host #N 1,501 - Cannot contact Global Daemon on #N - #N 1,502 - Invalid action requested of daemon on #N 1,503 - Global Daemon error - #N #N 1,504 - Unexpected error contacting Daemon - check versions match 1,505 - Wrong version #I of Global Dynamic library (version #I expected) - check settings 1,511 - Cannot change system database location for #F - already in progress 1,512 - Cannot change system database location for the Hub 1,513 - New Hub location #N must have system database administered locally 1,514 - Cannot relocate Hub - System database relocation in progress for new Hub 1,515 - (From remote #N) #N 1,516 - Failed to recover Primary location of #F 1,517 - $P Please edit the lines following $. into a new macro file, to be run $P after locations have been initialised. 1,518 - $( This macro must be run in a global project $) 1,519 - $P Non-global project. MAKE GLOBAL and run macro again 1,520 - $P Location #N not initialised. Run macro again after initialising locations 1,521 - Systemlocation #F Primary at #F 1,522 - Remote Command for location #F not allowed from the Current location 1,523 - Command cannot be used for transaction DB 1,524 - 1,525 - Command not valid for DB - Primary location currently being changed 1,526 - 1,527 - New location #N for system database of location #N must have its own system database administered locally 1,528 - Command not valid for Extract database 1,529 - Cannot deallocate #F at #F - relocation already in progress 1,530 - Cannot create extract - its owner extract #F must be allocated at the destination location #F 1,531 - Command only valid at Hub or administering location of #F 1,532 - Descendant of specified database (#F) is not primary at current location 1,533 - SAVEWORK cannot release claims in #H db - error #I - #N 1,534 - Off-line location with system database administered locally. Cannot change system database location once the l... 1,535 - Off-line location - must be administered by the Hub or itself 1,536 - Location administers system databases for other locations - cannot change system database location 1,537 - Cannot get list of locations for #F 1,538 - Location list too long for #F 1,539 - Could not get location name for #F 1,540 - Cannot create extract remotely - location #F is offline 1,541 - Cannot delete extract remotely - location #F is offline 1,542 - Cannot merge or backtrack a working extract at another location 1,543 - ADMINISTER command failed due to SAVEWORK problem 1,544 - Cannot deallocate #F at #F - database owns working extracts at location 1,545 - Cannot delete user - it owns working extracts 1,546 - Cannot create a new Master DB above #F, since #F is not itself a Master DB 1,547 - Cannot create Master - old Master extract #F must be allocated to the hub 1,548 - May only create a new Master at the hub 1,549 - Licensing error - Cannot convert project containing extract databases to Global 1,550 - GLOBALPLUS functionality not available in Global 1 project 1,551 - Cannot upgrade Global project Version 1,552 - Failed to recover Project Hub - Quitting changes 1,553 - Please exit and restart PDMS to enable correct environment for Global project AppWare. Unexpected Appware e... 1,554 - Cannot create anymore extracts below given one 1,555 - Dabacon error #I occurred when inserting extract into parent extract 1,556 - Database #F cannot be CNAMED - it owns working extracts at location 1,557 - You cannot synchronise a primary database with a secondary 1,558 - Transaction DBs must always be Multiwrite 1,559 - Unable to create the TRANSACTION team 1,560 - Unable to locate the TRANSACTION team 1,561 - Location name must be 3 long 1,562 - Transaction DB already exists for location #N 1,563 - The CHANGE command cannot be used on Transaction DBs 1,564 - The CNAME command cannot be used on Transaction DBs 1,565 - The team TRANSACTION is reserved for Transaction DBs 1,566 - Cannot cancel command for user #N - insufficient privileges 1,567 - Cannot cancel command #F - command in wrong state 1,568 - Cannot cancel command #F at remote location #F 1,569 - Cannot cancel command #F - command does not belong to location #F 1,570 - Cannot cancel command #F - This command was not issued by a user 1,571 - You are not allowed to renew database #F at location #F 1,572 - Location #N has no transaction db 1,573 - Location transaction database #F file #N does not exist 1,574 - Location #N must be isolated to renew database #F 1,575 - Only location transaction database #F is allocated at location #N - this database will not be de-allocated by ... 1,576 - Location #F is not a direct neighbour of current location 1,577 - Event Loop time must be in the range 1 - 300 (in seconds), 1,578 - Command Time Out must be positive (in seconds) 1,579 - Command Maximum retry must be positive 1,580 - Time interval between retries must be positive (in seconds) 1,581 - Time interval between resending commands must be positive (in seconds) 1,582 - A LCTIMD element already exists for location #F 1,583 - Attribute #H may not be modified 1,584 - Warning: file #N must be deleted manually from offline satellites (if any) 1,585 - Cannot open file for database #F to get session data 1,586 - Cannot copy Team User list as team - Refno #F has no name. User list will be lost from the team. 1,587 - #F cannot be deallocated from #N, locations can be deleted whilst the transaction dB is allocated 1,588 - Exceeded number of locations being recorded as deallocating this dB, this will not be added to list 1,589 - Database #F is a TRANSACTION DB and cannot be renamed. Name will be modified when locations locid is modified. 1,590 - Cannot modify team name /*TRANSACTION, this is used by global for holding transaction dBs 1,591 - Cannot delete extract - #N #F is primary at offline satellite #F 1,592 - Warning: Check that Daemon has been stopped may take up to 3 minutes 1,593 - Daemon is running. Please stop the local daemon and try again 1,594 - Please exit from PDMS and restart your local daemon now. This will renew the transaction database. 1,595 - Cannot RENEW DELETE #F when other users in PDMS 1,596 - Transaction Command Persistence range must be -1 (do not delete), or 0 - 365 days 1,597 - System database requires REPAIR. 1,598 - System database - #I entries repaired. 1,599 - Global database requires REPAIR for #I illegal database allocations. 1,600 - Global database repaired automatically for for #I illegal database allocations. 1,601 - #F contains a reference to a deleted element =#I/#I 1,602 - #F contains a de-allocated database #F 1,603 - Database entries requiring repair: 1,604 - Nothing to repair 1,605 - List owned by #F contains a deleted element 1,606 - List owned by #F contains a de-allocated database #F 1,607 - Found #I illegal team references, #I illegal or deallocated DB references, #I illegal location references. 1,608 - Cannot delete location #N - it is the primary location of #F 1,609 - Cannot delete location #N - it is the previous primary location of #F 1,610 - Cannot get details of file - update skipped 1,611 - Prevented Reverse Update 1,612 - Prevented Reverse Copy 1,613 - Unable to check update Direction - update skipped 1,614 - Update failure - database pages not contiguous 1,615 - Update failure - dabacon error 1,616 - Update failure - failed to copy file. File may be in use 1,617 - Update failure - Missing file 1,618 - Update failure - Location unavailable for COPY 1,619 - Update failure - cannot verify success (may be COPY failure) 1,620 - Update failure - error in argument list 1,621 - Update failure - system DB name error 1,622 - Update failure - cannot COPY - ADMNEW file already exists 1,623 - Update failure - cannot open ADMNEW file to copy 1,624 - Update failure - cannot access remote file to copy from 1,625 - Update failure - copied to ADMNEW file - cannot commit copy 1,626 - Update failure - should remove ADMNEW file - does not match original 1,627 - Update failure - ADMNEW file removed - does not match original 1,628 - Update failure - Copy failed due to locked file 1,629 - Update failure - Copy failed due to locked file - overwrite is disabled 1,630 - Update failure - Copy failed due to failed update for another extract of this database 1,631 - Transaction DB purged OK, but merge may have failed due to file in use ************************************************************************************** 2 - Error messages for the libraries of MOLIB ************************************************************************************** 2,1 - The Qualifier for attribute #H must be a positive integer value 2,3 - The offset of the attribute #H must be a strictly positive integer value 2,4 - The higher offset of the attribute #H must be greater than or equal to the lower one 2,5 - Field #I does not exist for attribute #H. The offset is greater than the attribute size. 2,6 - Attribute #H does not exist 2,7 - UDA not found - probably deleted 2,8 - Attribute #H may not be set in this way 2,9 - Too many values given for attribute #H 2,10 - Data of wrong type for attribute #H 2,11 - Only UDAs may take a default value 2,12 - Insufficient access rights for attribute #N 2,13 - Attribute #N not valid for current element 2,14 - Too many values given for attribute #N 2,15 - Invalid value of attribute #N 2,16 - Wrong attribute type 2,17 - Attempt to set array attribute in such a way as to leave unset fields 2,18 - Element #F is locked 2,19 - A reference may not be made to an element of this type 2,20 - Database not open with write access 2,21 - Unable to set attribute #H 2,22 - This syntax is restricted 2,23 - Invalid number of parameters given 2,24 - Invalid number of characters given 2,25 - Read only DB 2,26 - Unable to change element #F - Not claimed? 2,27 - Unable to evaluate rule for #H on #F 2,28 - Invalid rule length - check if max.rule length exceeded 2,29 - Rule not found for attribute #H of #F 2,30 - No elements of required type found 2,31 - Rule cannot be set for non-scalar attribute of this type 2,32 - Significant element must be CLAIMed before attributes can be updated 2,33 - Unable to set result of rule for attribute #H on #F 2,34 - Expression is of the wrong type for a rule on attribute #H 2,35 - Failed to update rule status for attribute #H 2,36 - Failed to create dynamic links for rule 2,37 - Incompatible dynamic links found on Master element #H 2,38 - Failed to remove dynamic links for rule 2,39 - Warning-Failed to update dependent attribute #H on element #F 2,40 - Could have incompatible loop in dependencies 2,41 - Warning - value of attribute #H on element #F differs from value of rule 2,42 - Unable to update all dependent attributes (more than 500) 2,43 - Unable to set rule for attribute #H 2,44 - Warning - value of uda #N differs from value of dynamic rule on element #F 2,45 - Sub-rule number #I for #H not found 2,46 - Sub-rule number #I for #H out of range - ignored 2,47 - May not set attribute #H as unset 2,48 - 2,49 - Updating attribute #H on element #F as a result of dynamic link 2,50 - Warning- cannot create dynamic link between rule on #F attribute #H and attribute #H on #F 2,51 - Invalid definition code #H encountered when handling attribute/noun #H. 2,52 - Attempt to retrieve wrong type of data from ADF for info #H, attribute #H. 2,53 - Attribute #H not found in the Attribute Data File. 2,54 - Noun #H not found in the Attribute Data File. 2,55 - Information item #H not found for attribute/noun #H in the ADF. 2,56 - ADFLIB Attribute Data File error. 2,57 - Attribute/noun type information either corrupt or absent for #H. 2,58 - ADFLIB index overflow error. 2,59 - Invalid hash code #I in the Attribute Data File, in record #I at position #I 2,60 - Invalid default flag in the Attribute Data File. 2,61 - Unable to open the Attribute Data File. 2,62 - Invalid attribute hash code. 2,63 - Invalid noun hash code. 2,64 - ADFLIB defaults array overflow error. 2,65 - Synonym #H for attribute/noun #H not found. 2,66 - Attribute/noun syntax table empty. Attribute Data File probably not open. 2,67 - #H is an invalid attribute/noun field. 2,68 - Too many attribute fields requested 2,101 - IDLIB stack overflow error: The identification expression is too complex 2,102 - The null reference cannot be used here 2,103 - A reference array cannot be used in an identification expression 2,104 - No SCID graph for this module 2,105 - The identification text retrieved is too long 2,106 - The current element cannot be =0/0 2,107 - Undefined reference =#I/#I 2,108 - #F is not a #H 2,109 - Undefined name #N 2,110 - Cannot access SAME element 2,111 - Cannot access element type #H from the level of #F 2,112 - The commands END, NEXT, LAST,... are illegal at WORLD level 2,113 - List exhausted for #F 2,114 - =0/0 has no attribute 2,115 - The commands END, NEXT, LAST,... are illegal for =0/0 2,116 - Element #F has no list part 2,117 - IDLIB stack is inconsistent 2,118 - =#I/#I is a reference to an illegal element 2,119 - Invalid position in list for element #F 2,120 - Incorrect component type for implied tube command 2,121 - Implied tube does not exist (length < #D ) for this component 2,122 - Implied tube has no list part 2,130 - Current element has no name, * unchanged. 2,131 - Cannot set "*" to a name with a "*" in it. 2,132 - Cannot find element in given direction 2,133 - System error-No valid id stack to retrieve 2,134 - Member list corruption for element #F. Please check DB using DICE 2,150 - SYSTEM ERROR - element #F, attribute #H, DABACON unexpected error number #I 2,151 - SYSTEM ERROR - problem with CRETUR 2,152 - SYSTEM ERROR - ATTLIB unexpected error 2,153 - SYSTEM ERROR - unknown definition for the attribute #H 2,154 - SYSTEM ERROR - too many attribute values to be transferred in array 2,155 - SYSTEM ERROR - UDALIB unexpected error 2,156 - SYSTEM ERROR - GATWRH, GATPOS, GATDIR or GATORI called with a UDA 2,157 - SYSTEM ERROR - wrong value for a global common variable 2,158 - SYSTEM ERROR - invalid dummy routine called 2,160 - SYSTEM ERROR - Action number out of range 2,161 - SYSTEM ERROR - Invalid dummy routine called. 2,162 - SYSTEM ERROR - Invalid P-point number #I when calling a GETATTLIB routine. 2,163 - SYSTEM ERROR - Invalid offsets when calling a GETATTLIB routine. Ensure that 0 <= OFFLOW <= OFFHIG. 2,164 - Database error #I on setting attribute #H 2,165 - Unexpected database error 165 encountered 2,166 - Unexpected database error #I encountered 2,167 - SYSTEM ERROR - Unexpected GETATTLIB error #I encountered 2,180 - Undefined local name /#N 2,181 - Local name cannot be set/unset for #F - it is not a template element 2,182 - Unable to set local name - check if template is locked or arrays are full 2,183 - Unable to unset local name - check if template is locked 2,184 - Insufficient access rights to modify local name 2,185 - Local name #N already in use for #F 2,186 - Rule sequence no. cannot be set/unset for #F - it does not have a local name 2,187 - RSEQN must be a positive value 2,188 - Unable to set/unset RSEQN - check if template is locked 2,201 - Element #F does not have attribute #H 2,202 - Cannot go to the element #F 2,203 - Insufficient access rights for user defined attribute #H on element #F 2,204 - User defined attribute #H not valid for element #F 2,205 - Invalid refno #F 2,206 - Attribute is of wrong type 2,207 - Required property not found for element #F 2,208 - Property #H #H cannot be evaluated for #F - max.level of nesting exceeded 2,209 - Calculated property value for #H #H is outside permitted range of values 2,210 - Problem with P-points of element #F 2,211 - Attribute #H cannot be evaluated for #F - max.level of nesting exceeded 2,212 - 2,213 - 2,214 - 2,215 - 2,216 - 2,217 - 2,218 - 2,219 - 2,220 - Attribute #H cannot be calculated for element #F 2,221 - The name of element #F is too long 2,222 - Attribute #H is not valid for implied tube 2,223 - Attribute #H is unset for element #F 2,224 - Required P-line does not exist for element #F 2,225 - Required P-point does not exist for element #F 2,226 - Specified offset is outside the range of values set for attribute #H on element #F 2,227 - Property for #F is of the wrong type 2,228 - Text attribute #H contains too many values 2,229 - Element #F does not have user defined attribute #H 2,230 - Insufficient access rights for attribute #H on element #F 2,231 - Cannot determine attribute #H for element #F 2,232 - Unable to access catalogue component in order to ascertain value of attribute #H on element #F 2,233 - Unable to get element owner for element #F 2,234 - 3-d coordinates cannot be calculated from a 2-d position in a View with a non-orthogonal viewing direction 2,235 - Expanded text not available 2,236 - #F: empty ID list 2,237 - Attribute #H: Question #H does not exist for #F 2,238 - Database type #2H not recognised 2,239 - Database type #2H is not in current MDB 2,240 - Owning branch has invalid head ref - #2F 2,241 - Invalid connection reference - #2F 2,242 - Database set has reference to itself, recursion exists 2,243 - Exceeded limit for number of dbset entities for attribute 2,244 - Attribute #H cannot be calculated for element #F. Attribute #H of #F not set or wrong. 2,245 - Attribute #H cannot be calculated for element #F. Attribute #H of #F not set or wrong for #F. 2,246 - Piping #F does not have BLTM attribute set to NEW 2,247 - Cannot find piping spec for flanged component #F 2,251 - P-point index must be positive 2,252 - #F is not a piping or a hanger component or has not been positioned, orientated or selected. 2,253 - #F is not a branch or piping component 2,254 - #F is not a hanger or hanger component 2,255 - PPOINTLIB stack overflow error: P-point expression too complex 2,256 - #I is an illegal P-point number for element #F 2,257 - Cannot find the element owning the P-point 2,258 - The P-point retrieved text is too long 2,259 - PPOINTLIB stack is inconsistent 2,260 - PPoint attribute is not valid in this context 2,261 - Pline attribute is not valid in this context 2,262 - Ppoint/pline evaluation code is not present in executable 2,281 - Too many levels of nested plugging 2,282 - Internal error -No more room in plug lists - expression too complicated 2,283 - Internal error -ATPEND called without a call to ATPBEG 2,284 - Internal error - Plugging not initialised 2,285 - Internal error - Stored stack overflow in ATPUSH 2,286 - Internal error - no value to pop - in ATPOP 2,287 - Internal error - Expected check value not found in ATPOP 2,301 - The retrieved text of the real value is too long 2,302 - The unit text is too long 2,303 - Value out of range of this machine 2,304 - VALLIB stack is inconsistent 2,305 - VALLIB stack overflow error 2,306 - Unknown user definable units 2,307 - Cannot use additive units for surfaces or volumes 2,308 - Integer value too out of range. Maximum allowed value is 1E8 2,351 - The retrieved text of the direction, orientation or position is too long 2,352 - The command requires a position and not a direction 2,353 - The keyword IS must be preceded and followed by a direction and not a position 2,354 - The X axis (East-West) may not be used more than once to define a position, direction or orientation 2,355 - The Y axis (North-South) may not be used more than once to define a position, direction or orientation 2,356 - The Z axis (Up-Down) may not be used more than once to define a position, direction or orientation 2,357 - Undefined direction: the FROM and TO positions are equal 2,358 - Orientation incorrectly defined 2,359 - DOPELIB stack is inconsistent 2,360 - Cannot get position of #F 2,361 - DOPELIB stack overflow: direction/orientation/position expression too complex 2,362 - Invalid Dopelib version number 2,363 - Invalid format type 2,364 - System error-No valid dopelib stack to retrieve 2,365 - A position must be entered rather than a direction 2,370 - Rule for attribute #H of #F refers to attribute #H of #F, but there is no corresponding backpointer. 2,371 - PATCH: Dynamic link between attribute #H of #F and attribute #H of #F has been constructed. 2,372 - An incorrect backpointer exists establishing a dynamic link between attribute #H of #F and attribute #H of #F. 2,373 - PATCH: Incorrect backpointer establishing dynamic link between attribute #H of #F and attribute #H of #F has b... 2,374 - Unable to patch rules on element #F; database is readonly 2,375 - Attribute #H of #F points to invalid reference #F 2,376 - Attribute #H (#I) of #F points to invalid reference #F 2,377 - PATCH: Attribute #H of #F has been unset 2,378 - PATCH: Attribute #H (#I) of #F has been unset 2,379 - Attempt to patch attribute #H of #F failed 2,380 - Attribute #H of #F points to #F, but there is no backpointer 2,381 - Attribute #H (#I) of #F points to #F, but there is no backpointer 2,382 - Unable to patch; unable to determine which attribute of #F should point back to #F 2,383 - Unable to patch; unable to determine whether #H of #F or #H of #F was modified most recently 2,384 - PATCH: Attribute #H of #F has been set to #F 2,385 - PATCH: Attribute #H (#I) of #F has been set to #F 2,386 - Rule for attribute #H of #F refers to attribute #H of #F, but this element cannot be found 2,387 - Rule for attribute #H of #F refers to attribute #H of #F, but this attribute cannot be found 2,388 - Attempt to patch #F failed 2,389 - Attribute #H of #F points to #F, of inappropriate type 2,390 - Attribute #H (#I) of #F points to #F, of inappropriate type 2,391 - Rule for attribute #H of #F cannot be evaluated 2,401 - EXPRLIB operation stack overflow: expression too complex 2,402 - TYPE MISMATCH: text expression expected 2,403 - TYPE MISMATCH: logical expression expected 2,404 - TYPE MISMATCH: real expression expected 2,405 - TYPE MISMATCH: the operators OR, AND and NOT are available only for logical expressions 2,406 - TYPE MISMATCH: illegal comparison using the operators EQ or NE 2,407 - TYPE MISMATCH: illegal comparison using the operators GT, LT, GE or LE 2,408 - TYPE MISMATCH: illegal use of the unary operators + or - 2,409 - TYPE MISMATCH: illegal use of the binary operators +, -, * or / 2,410 - TYPE MISMATCH: illegal argument type for a trigonometric function (real expected) 2,411 - TYPE MISMATCH: illegal argument type for LOG or ALOG function (real expected) 2,412 - TYPE MISMATCH: illegal argument type for INT or NINT function (real expected) 2,413 - TYPE MISMATCH: illegal argument type for NEG or ABS function (real expected) 2,414 - TYPE MISMATCH: illegal argument type for SQRT or POWER function (real expected) 2,415 - TYPE MISMATCH: illegal argument type for MIN or MAX function (real expected) 2,416 - TYPE MISMATCH: illegal argument type for AFTER, BEFORE, MATCH or function (text expected) 2,418 - TYPE MISMATCH: illegal argument type for LENGTH, UPCASE or LOWCASE function (text expected) 2,419 - TYPE MISMATCH: illegal argument type for REAL function (text expected) 2,420 - TYPE MISMATCH: illegal argument type for STRING function (real and an optional text/pos and an optional text/l... 2,421 - TYPE MISMATCH: illegal argument type for SUBSTRING function (text and one or two reals expected) 2,422 - TYPE MISMATCH: illegal argument type for DISTANCE function (real expected) 2,424 - TYPE MISMATCH: illegal argument type for PART ... OF ... function (real and reference expected) 2,425 - EXPRLIB inconsistent operation stack 2,426 - EXPRLIB type stack overflow: expression too complex 2,427 - The value of the expression is undefined 2,428 - EXPRLIB evaluation stack overflow: expression too complex 2,429 - CALCULATOR ERROR: overflow error for +, -, * or / operator 2,430 - CALCULATOR ERROR: division by zero 2,431 - CALCULATOR ERROR: overflow error for TAN operator 2,432 - CALCULATOR ERROR: the argument of ACOS or ASIN is not in the range [-1.0,+1.0] 2,433 - CALCULATOR ERROR: ATANT(0.0,0.0) is undefined 2,434 - CALCULATOR ERROR: square root of a negative number 2,435 - CALCULATOR ERROR: logarithm of a non positive number 2,436 - CALCULATOR ERROR: overflow error for ALOG operator 2,437 - CALCULATOR ERROR: overflow error for INT or NINT operator 2,438 - CALCULATOR ERROR: the first argument of POWER is negative and the second one is not an integer 2,439 - CALCULATOR ERROR: overflow error for POWER function 2,440 - CALCULATOR ERROR: the first argument of POWER is zero and the second one is non positive 2,441 - CALCULATOR ERROR: Unable to convert string '#N' to a number 2,442 - CALCULATOR ERROR: The concatenated text is too long 2,443 - CALCULATOR ERROR: STRING function precision must be in range D0 to D6 2,444 - CALCULATOR ERROR: Unable to convert variable #N into a number 2,445 - CALCULATOR ERROR: Unable to convert variable #N into a logical 2,446 - CALCULATOR ERROR: attribute arrays cannot be used in an expression 2,447 - TYPE MISMATCH: text, logical or real expression expected 2,448 - TYPE MISMATCH: illegal argument type for VVALUE, VLOGICAL or VTEXT (variable name and real expected) 2,449 - TYPE MISMATCH: illegal argument type for DEFINED or UNDEFINED (variable name and real expected) 2,450 - TYPE MISMATCH: illegal argument type for ARRAYSIZE (variable name expected) 2,451 - CALCULATOR ERROR: #N is an array variable and not a scalar variable 2,452 - CALCULATOR ERROR: #N is a scalar variable and not an array variable 2,453 - CALCULATOR ERROR: ZXY cannot be performed, less than three values are in the evaluation stack 2,454 - CALCULATOR ERROR: the array element name #N is used where an array name is expected 2,455 - CALCULATOR ERROR: the argument of DIST is too large, cannot perform conversion 2,456 - TYPE MISMATCH: illegal argument type for the BETWEEN or SBETWEEN operator (reals expected) 2,457 - TYPE MISMATCH: illegal argument type for the COMPONENT ... OF ... function (direction and position expected) 2,458 - TYPE MISMATCH: illegal checked value for INSET list (real or text expected) 2,459 - TYPE MISMATCH: one element of the INSET list does not have the same type as the checked value 2,460 - CALCULATOR ERROR: Integer overflow encountered while evaluating expression 2,461 - TYPE MISMATCH: illegal argument type for TRIM function (one, two or three text arguments expected) 2,462 - TYPE MISMATCH: illegal argument type for MATCHWILD function (two, three or four text arguments expected) 2,463 - TYPE MISMATCH: illegal argument for MATCHWILD function (wild card can only be a single character) 2,464 - TYPE MISMATCH: illegal argument for MATCHWILD function (single and multi-character wild cards must differ) 2,465 - TYPE MISMATCH: illegal argument for MATCHWILD function (only the pattern argument may contain wildcards) 2,466 - EXPRLIB problems matching wildcard expression - too complex 2,467 - subscript not allowed on variable for ARRAYSIZ,ARRAYWIDTH functions 2,468 - CALCULATOR ERROR: Array subscript out of range 2,469 - CALCULATOR ERROR: Property #H not found 2,470 - CALCULATOR ERROR: Invalid element after OF 2,471 - TYPE MISMATCH: illegal argument type for DISTANCE function 2,472 - TYPE MISMATCH: illegal argument type for NOMBORE function 2,473 - NOMBORE: Nominal bore not found for this value 2,474 - TYPE MISMATCH: illegal argument type for PART function 2,475 - CALCULATOR ERROR: error in accessing PML variable #N 2,476 - CALCULATOR ERROR: invalid arguments for DISTANCE function 2,477 - CALCULATOR ERROR: invalid subscript for attribute 2,478 - Invalid expression type returned from EXPRLIB 2,479 - Too many expressions entered 2,480 - TYPE MISMATCH: illegal argument type for BADREF function (reference expected) 2,481 - TYPE MISMATCH: illegal argument type for UNSET function 2,482 - TYPE MISMATCH: illegal argument type for ARRAY function (position, direction or orientation expected) 2,483 - TYPE MISMATCH: illegal argument type for EMPTY function (text expected) 2,484 - TYPE MISMATCH: illegal argument type for OCCUR function (two text arguments expected) 2,485 - TYPE MISMATCH: illegal argument type for REPLACE function (three text arguments and two optional reals expected) 2,486 - CALCULATOR ERROR: invalid string lengths in REPLACE function 2,487 - WARNING use [ rather than ( for subscripts of attributes 2,488 - TYPE MISMATCH: illegal argument type for DISTCONVERT function (real expected) 2,489 - 3rd argument to TRIM function may not be zero length 2,490 - System error-No valid expression stack to retrieve 2,491 - TYPE MISMATCH: illegal argument type for AFTERDATE function (two text arguments expected with valid date forma... 2,492 - Text string too long to be converted to HASH code (maximum 4 characters) 2,493 - Real value out of range for HASH codes 2,494 - TYPE MISMATCH: illegal argument type for VALID function 2,500 - Insufficient access control rights for element #F 2,501 - Insufficient access control rights for attribute #H on element #F 2,502 - #N 2,503 - Access control out of scope for #F 2,504 - Element type has insufficient access control rights for #F 2,505 - Access control operation must be one of CREATE, MODIFY, DELETE, CLAIM, ISSUE or DROP 2,531 - Position required for defining volume, not direction nor orientation. 2,532 - Error with hierarchy stack 2,533 - Error with attribute stack 2,534 - Error with class stack 2,535 - Error with volume stack 2,536 - Error getting volume for #F 2,537 - SELECT inconsistent hierarchy stack 2,538 - SELECT stack incompatible. Program version is #R, stack version is #R. 2,539 - 2,540 - SELECT inconsistent volume stack 2,541 - SELECT invalid PML array name 2,542 - SELECT PML array is not defined 2,543 - SELECT PML array has same name as DO counter 2,544 - SELECT PML value too large 2,545 - SELECT PML variable is not a simple variable 2,546 - SELECT PML variable is not an array 2,549 - Can only select from references held in objects of type STRING 2,550 - SELECT Invalid reference number in array 2,551 - SELECT General stack error 2,552 - 2,553 - SELECT stack incompatible. Due to using a 10.3 version at 10.4. Reinput RRULs and TAGRs or convert using th... 2,554 - Entered dummy routine SELMSP 2,555 - Error with module specific selection 2,556 - ALL cannot be used with this command as too many items will be selected. 2,557 - Invalid reference number given for selection criteria evaluation 2,561 - Direction required, not position nor orientation. 2,562 - Position required, not direction nor orientation. 2,563 - Element wrong type 2,564 - There are only #I internal constraints. 2,565 - Error with Internal Constraints stack 2,566 - Wrong type of Internal Constraint 2,567 - Elbow or Bend cannot be created. Previous component not orientated or selected 2,568 - Element #F cannot be created. Angle cannot be calculated 2,569 - Element #F cannot be created. Angle is 0 2,570 - Element #F cannot be created. Cannot be orientated 2,571 - Element #F cannot be created. Cannot be positioned 2,572 - Constraint component #F is not owned by the branch 2,573 - Element #F cannot be selected. 2,574 - "REORDER" will have no effect. 2,575 - No suitable travel plane for #F 2,576 - No unique travel plane for #F 2,577 - No suitable entry plane for #F 2,578 - No unique entry plane for #F 2,579 - No action for #F 2,580 - PML #F could not be run. 2,581 - Constraint cannot be copied as #F is already constrained. 2,582 - Constraint cannot be copied from #F as it is not constrained. 2,583 - Constraint cannot be copied from #F as it is not compatible. 2,601 - Element #F is not suitable for claiming/unclaiming 2,602 - It is not permissible to Claim ALL elements 2,603 - Element #F is already claimed 2,604 - Element #F is not claimed 2,605 - Primary element #F must be CLAIMed before database can be updated 2,606 - No elements match criteria 2,607 - You do not have permission to claim #F 2,608 - Only items in a MultiWrite or Controlled database may be claimed/unclaimed 2,609 - edmslink not found - check that environment variable EDMSPATH is set correctly 2,610 - You are not permitted to use name #N 2,611 - Only named elements in a CONTROLLED, UPDATE DB may be claimed/unclaimed 2,612 - No primary element found 2,613 - Unable to claim #F as element is altered in a later session. Please GETWORK and try again 2,614 - Unable to claim #F as element is already claimed by #N from extract #N 2,615 - Unable to release element #F since updates are outstanding 2,616 - Maximum number of #I errors output. The remaining error messages have been suppressed 2,617 - All elements below #F must be claimed to do this command 2,618 - Unable to claim all elements below #F 2,619 - You do not have permission to release #F 2,620 - General failure to claim, release or merge element 2,621 - Unexpected dabacon error #I claiming/releasing element - #F 2,622 - Claiming elements remotely from DB #N Please wait ...then use Q CLAIMLIST EXTRACTS before trying again 2,623 - Unable to claim #F as element is altered in a later session. Please do a GETWORK and try again 2,624 - Requesting new element from #F remotely at location #F - please wait ...then try again 2,625 - Cannot flush extract changes from #F - its owner extract is primary at location #F - the CHANGE PRIMARY ... 2,626 - Releasing all elements from #F remotely at location #F - please wait ...then use Q CLAIMLIST EXTRACTS befor... 2,627 - Cannot do PARTIAL ISSUE from #F across the Global network to location #F 2,628 - Cannot do PARTIAL FLUSH from #F across the Global network to location #F 2,629 - Cannot do PARTIAL RELEASE from #F across the Global network to location #F 2,630 - Unable to release all elements, use Q CLAIMLIST to determine those still claimed 2,631 - Unable to claim #F from parent extract #N as element has been deleted in a later session. 2,632 - #F is not a primary element 2,633 - You cannot Claim #F without doing an Extract Claim first 2,634 - #F cannot be claimed as higher extract does not allow an implied claim 2,635 - Unable to claim #F from parent extract #N 2,636 - Claiming element #F remotely from DB #N Please wait ...then use Q CLAIMLIST EXTRACTS before trying again 2,637 - Unable to claim #F into extract #N as element is altered in a later session in the parent extract. Please EXT... 2,650 - Database #F is not in current MDB 2,651 - Cannot drop elements in database #F 2,652 - Cannot issue elements in database #F 2,653 - Cannot flush elements in database #F 2,654 - Cannot refresh elements in database #F 2,655 - Cannot release elements in database #F 2,661 - Cannot drop element #F 2,662 - Cannot issue element #F 2,663 - Cannot flush element #F 2,664 - Refresh element not yet implemented 2,665 - Cannot release element #F 2,670 - A Previous Flush/Issue command has not yet completed, cannot perform Operation Please wait ...then try again 2,701 - May only copy a GROUP or GROUPWORLD to another GROUP or GROUPWORLD 2,702 - Warning - failed to create a copy of element #F 2,703 - May not copy element #F 2,704 - Element type #H may not be changed to type #H 2,705 - Current element owner is not valid for new type #H 2,706 - Member of the current list #F is not valid for new type #H 2,707 - Warning - attribute #H will be lost 2,708 - Cannot copy parent of current element 2,731 - Invalid ref #X on attribute #H, element #F 2,732 - TABULATE size must be between 0 and #I 2,733 - May specify at most #I ONLY element types 2,734 - PASS must be 1 or 2 2,735 - Extract number #I is not valid for this DB 2,736 - Stamp #N not found 2,750 - Cannot invoke method #N on non-existent object 2,751 - Variable #N does not exist 2,752 - Array element #N does not exist 2,753 - Both arguments to #N are unset 2,754 - Argument #I to #N is unset 2,755 - Array index is not a number 2,756 - Array index is unset 2,757 - Attempt to index on non-array object 2,758 - Expression result not of expected type (#N) 2,759 - Object does not have a member #N 2,760 - Cannot assign to unnamed temporary object(#N) on left hand side 2,761 - Cannot assign variable to result - incompatible types (#N) 2,762 - SPLIT - Too many characters - max = #I 2,763 - Method #N is attempting to modify a temporary object 2,764 - Function not defined yet 2,765 - Cannot get member #N from non-existent object 2,766 - This function does not return a result 2,767 - Invalid object type 2,768 - Variable cannot be deleted 2,769 - Array element is not of type string 2,770 - Wrong number of arguments to function 2,771 - Negative or zero values for array position are not allowed 2,772 - Old style arrays using index 0 cannot be used with this command 2,773 - Negative count of array elements is not allowed 2,774 - Cannot make DBREF from STRING - unrecognised format 2,775 - Unable to convert string '#N' to a boolean value 2,776 - Method #N does not return a boolean 2,777 - Method #N returns an unset boolean value 2,778 - Function #N does not have enough arguments (>0) 2,779 - Method #N not found 2,780 - Function #N not found 2,781 - Cannot append contents of array onto itself 2,782 - Cannot assign ARRAY component to itself or vice versa 2,783 - Method is not returning an object of the expected type (#N) 2,784 - Argument array to REINDEX contains non-real value 2,785 - Unset/Invalid object passed to method 2,791 - Cannot assign to attribute. Attribute is not settable. 2,792 - Cannot assign to attribute. contains white space. 2,793 - Cannot assign to attribute. contains illegal characters. 2,794 - Cannot assign to attribute. Object must be of type #N 2,795 - Cannot assign to attribute. Invalid database element. 2,796 - Cannot assign to attribute. Object contains unset/invalid data. 2,797 - Cannot assign to attribute. Not all array elements are of type #N 2,798 - Cannot assign to attribute. Array element contains unset/invalid data. 2,799 - Cannot assign to attribute. Array contains unset elements. 2,800 - Attribute requires an integer qualifier e.g. #N[1] 2,801 - Attribute requires a qualifying word e.g. #N.tos 2,802 - Attribute #N is read only 2,803 - Cannot set the value of attributes with '=' assignment 2,804 - Attempt to set array attributes to non ARRAY object(#N) 2,805 - #N is not a valid attribute name 2,806 - Attempt to index non-array object 2,807 - Dimension in format must be L for bores 2,808 - Input is not a bore value (nearest valid bore is #B) 2,809 - Unknown user definable units 2,810 - Cannot use additive units for surfaces or volumes 2,811 - This command is not for general use 2,812 - String is not of the expected dimension(#N) 2,813 - Cannot convert string to #N 2,814 - Format structure has unknown dimension 2,815 - Format structure has unknown length unit 2,816 - Units not set in FORMAT 2,817 - FINCH format is not appropriate for areas or volumes 2,818 - Format must have a dimension L to convert objects of this type 2,819 - Format must have UNITS set to MM, FEET, FINCH or INCH 2,820 - Input is not a bore value (nearest valid bore is #Rin) 2,821 - Method #N is only available for the current session 2,822 - Cannot set current element to an unset reference 2,823 - Invalid dimension given - should be L, L2, L3 or NONE 2,824 - Method #N is not available for a remote session 2,825 - Cannot compute area. PROFILE must be closed. 2,826 - Cannot compute sense direction. PROFILE must be closed and have at least 2 edges. 2,827 - Cannot compute sense direction. PROFILE must be closed. 2,828 - Cannot retrieve PROFILE edge data. Edge index out of range. 2,829 - Boolean operation failed - # 2,830 - Arc/profile is not in same plane as profile 2,831 - Given plane is parallel to plane of PML profile object 2,832 - Cannot construct PROFILE. Input array must contain ARC, LINE or POSITION objects only. 2,833 - Cannot compute plane of PROFILE. 2,834 - Cannot compute area. PROFILE must not self-intersect. 2,835 - Cannot compute sense. PROFILE must not self-intersect. 2,836 - PROFILE has no edges. 2,837 - Projection of supplied LINE onto PROFILE plane too short. 2,838 - MERGEARCS error. Maximum merge angle 350 degrees. Please use a smaller value. 2,839 - Cannot construct PROFILE from this element 2,840 - Cannot populate this element with a PROFILE 2,841 - 841 Reserved for PML profile object 2,842 - 842 Reserved for PML profile object 2,843 - Invalid datatype in argument - DBREF expected 2,844 - Impossible format - column width is less than the sum of the indents 2,845 - No TABLE has been defined for this REPORT object 2,846 - Cannot find a column with this key in the TABLE 2,847 - Index is outside the range of this TABLE 2,848 - Specified column position is outside current range of TABLE 2,849 - Invalid expression string 2,850 - Cannot create an element below a group 2,851 - A #H is not a valid member of type #H 2,852 - Only elements within the same DB may be INCLUDED or REORDERED 2,853 - WORLD elements may not be deleted 2,854 - You may not INCLUDE or REORDER elements below a group 2,855 - Current element may not own other items 2,856 - Element to be INCLUDED is already owned by the current element 2,857 - Failure in legality checking routine 2,858 - Unable to delete element #F without claiming group #F 2,859 - Invalid reference number: =#I/#I 2,860 - Reference number =#I/#I already exists 2,861 - Cannot create an element as no remaining refnos are available for DB. Please run DICE with the patch option... 2,862 - Element #H is protected and cannot be modified by users. 2,863 - Attribute #N may not be set in this module 2,864 - Cannot delete #F whilst state is #N 2,865 - Cannot find TRUSER owning #F 2,866 - User #N cannot delete #F owned by #F 2,867 - Cannot delete #F as it has members 2,868 - Cannot create a #H at this level. 2,869 - Error in conversion to world co-ordinates. Check for unset objects 2,870 - Lines passed to method are parallel 2,871 - Lines passed to method are skew 2,872 - Lines passed to method are not parallel 2,873 - Line and plane passed to method are parallel 2,874 - Planes passed to method are parallel 2,875 - PointVector and plane passed to method are parallel 2,876 - Start and End Positions of Line passed to method are Coincident 2,877 - PointVector and line are passed to method parallel 2,878 - PointVectors passed to method are parallel 2,879 - Directions passed to method are parallel 2,880 - An Arc cannot have zero radius 2,881 - Impossible value for chord height 2,882 - Impossible value for chord length 2,883 - Cannot produce major arc 2,884 - Cannot intersect arcs on non-parallel planes 2,885 - Cannot generate an arc from collinear points 2,886 - Plane lines derived from points are parallel 2,887 - Cannot divide arc into zero segments 2,888 - Attempt to create invalid arc 2,889 - Span angle is greater than or equal to 180 degrees 2,890 - An invalid zero orthogonal direction has been obtained. Check for parallel directions 2,891 - An invalid zero direction has been obtained 2,892 - An invalid point co-incident to the original point has been supplied 2,893 - A zero segment grid is not allowed 2,894 - The radii and angles arrays cannot both be of zero size 2,895 - The point does not lie on the defined grid 2,896 - Invalid grid passed to method 2,897 - No intersection occurs with arc 2,898 - Error - No SHIP coordinate system 2,899 - Error - Incorrectly defined SHIP coordinate system ************************************************************************************** 6 - Copy of Dabacon 2 message ************************************************************************************** 6,1 - Database full (no more references available) 6,3 - Element definition not found 6,4 - Element type not a legal member of current element 6,5 - Current element has no list part 6,6 - End of list has been reached 6,10 - Invalid external reference 6,13 - Operation attempted on empty stack 6,15 - Invalid stack token 6,17 - Attribute is of wrong type 6,18 - Attribute not found 6,22 - Reference points to element of illegal type 6,23 - Data array too small (or too large) 6,25 - Name already associated with this reference (DDEFIN) 6,27 - Name has already been used (DDEFIN) 6,28 - Element has no name (DDECOD) 6,30 - Element has no name (DENCOD) 6,34 - Invalid direction given 6,37 - File write failed 6,38 - File read failed 6,41 - Database not open 6,42 - Database already open 6,48 - Illegal current position 6,50 - Attempt to alter locked element 6,51 - Too many DSAVEs 6,60 - Unrecognized % parameter 6,62 - %NPAGES out of range 6,63 - %PGSIZE out of range 6,64 - %TPGSIZ out of range 6,65 - %MXSTKS out of range 6,66 - %MXDBS out of range 6,67 - %MXTDBS out of range 6,68 - %MXQREFS out of range 6,69 - %MXSTLN out of range 6,70 - %NSTKS out of range 6,71 - %SCACHE out of range 6,91 - Attempt to write to read only database 6,92 - Number of open db files exceeded 6,106 - Failed to claim workspace 6,400 - No page frame headers available 6,401 - File switch failed 6,403 - Cannot delete an extract db with sub-extracts 6,404 - Cannot delete an extract when elements are claimed 6,405 - DB still had search tokens 6,406 - Internal consistency error 6,501 - Invalid extract number 6,502 - Update DB direct flag already set 6,503 - Update DB direct flag not set 6,504 - Maximum number of buckets for references exceeded 6,505 - Internal element reference not found in plu 6,506 - DB number does not correspond with that given at set update db direct 6,507 - Invalid attribute 6,508 - Page locked, but should not be - table search/compare still active? 6,509 - Operation not allowed on multiname table 6,510 - Invalid session number 6,511 - File is not a Dabacon db file 6,512 - Invalid DB number 6,513 - Invalid owning DB extract 6,514 - No more room on page 1 6,515 - Too many template dbs open 6,516 - Session page not found 6,517 - File is not a template db 6,518 - Template db of this type already open 6,519 - Required template db not open 6,520 - Potentially inconsistent flag set 6,521 - Template db in use 6,522 - Updates outstanding 6,523 - Table not found 6,524 - Table search tokens still allocated at dfinis 6,525 - Create information too long 6,526 - Number of table search tokens exceeded 6,527 - Table search token out of range 6,528 - Table search token not in use 6,529 - Table entry already exists 6,530 - Cannot save work whilst in this state 6,531 - Key size given does not match that for table 6,532 - Data size given does not match that for table 6,533 - Stack too small 6,534 - Table entry does not exist 6,535 - Table has been modified, so search invalidated 6,536 - Invalid mode given 6,537 - User name too long 6,538 - No current element 6,539 - Attempt to remove static attribute 6,540 - DB block for this db already open 6,541 - Error using DT routines from save work/compact 6,542 - Invalid information requested 6,543 - Stack size exceeded 6,544 - Current element still owns other elements 6,545 - Element types are different 6,546 - Attempt to remove element which is in more than one stack 6,547 - Maximum database number exceeded 6,548 - Template type mismatch 6,549 - Template version number mismatch 6,550 - DB block not found 6,551 - List type mismatch 6,552 - No current update db 6,553 - No mark to go to 6,554 - Cannot create an extract in an overwrite or singlewrite db 6,556 - Sessions not allowed in overwrite dbs 6,557 - Element has been modified in a later session 6,558 - Element is claimed 6,559 - Element does not belong to db given 6,560 - Element modified, so cannot be released 6,561 - Element name clash 6,562 - Element has been created under deleted element 6,563 - Cannot write to non_overwrite db while overwrite db open 6,564 - No suspended db to restore 6,565 - Element at top of hierarchy must be primary 6,566 - Can only alter shared elements in shared mode 6,567 - Attempt to restore or destroy a stack that has not been saved 6,568 - Invalid table type 6,569 - Element already exists 6,570 - Invalid table key 6,571 - Element is not claimed 6,572 - Element already in a primary list 6,573 - Cannot claim/release/flush a non-primary element 6,574 - Incompatibility at save work 6,575 - Cannot open a non_overwrite db in write-overwrite db open 6,576 - Claim/Release/Merge failed 6,577 - Deleted element that owns newly created elements 6,578 - Page is not a db page 6,579 - File flush failed 6,580 - File refresh failed 6,581 - Invalid integer table subscript 6,582 - New and old owners must either both or neither be in list 6,583 - Extract must be a leaf extract 6,584 - Extract list given does not comprise a complete tree 6,585 - Element owner must be in partial flush/abandon list 6,586 - Owned element must be in partial flush/abandon list 6,587 - Flush/refresh not allowed on copy extracts 6,588 - Element is owned by a different extract or user 6,589 - Attribute has been changed by 2 users 6,590 - Attempt to delete an element someone else has changed 6,591 - Attempt to change an element someone else has deleted 6,592 - Element has been deleted by 2 users 6,593 - Cannot introduce a new da into an existing shared element 6,594 - Number of incore pages must be increased 6,595 - Not valid on an overwrite db 6,596 - Maximum number of owned elements exceeded 6,597 - Token based routines should not be used after a DOPENW 6,598 - Cannot abandon - elements claimed 6,599 - Element must be claimed into this extract 6,600 - No unused bucket for references found 6,601 - No unused buckets available in extract 6,602 - 6,603 - Db must be a master with no owned extracts 6,604 - Cannot clone session-claimed elements do not exist in cloned session 6,605 - Element has no entry in parent claim list 6,606 - Element in parent extract is claimed to another user/extract 6,607 - Element needs claiming to child extract in parent extract 6,608 - Claim to child extract in parent extract needs clearing 6,609 - Claim list check routine has found inconsistencies 6,610 - Release failed-element is claimed by another user/extract 6,611 - Maximum number of member extracts exceeded 6,612 - User entry not found on page 1 6,613 - Previous flush could not be found 6,614 - New sessions are not contiguous with existing ones 6,615 - Create info on old and new page 0s differ 6,616 - Invalid extract hierarchy 6,617 - Extract is already in list of member extracts 6,618 - Extract refers to data on owner which is not present 6,619 - Cannot write to a db when it is DSWOLDed 6,620 - User has been expunged 6,621 - Invalid ELMSES 6,622 - Cannot undo/redo 6,623 - Attempt to access attribute beyond end of static attribute list 6,624 - Cannot give session number for all dbs 6,625 - Cannot change claim list if claim checking is on 6,626 - When switching claim checking off, claim list must be empty 6,627 - Db must be multiwrite 6,628 - New attribute will not fit in shared element 6,629 - Old and new page0s point to different session pages 6,630 - Trying to update a page outside update db direct limits 6,631 - Previous flush failed 6,632 - Bucket does not belong to db ************************************************************************************** 7 - DESCON ************************************************************************************** 7,2 - Trying to put an illegal attribute 7,3 - Incompatible connection types 7,4 - Bad ORI - Command defaults only legal for pipe components. 7,5 - Bad DIR - zero-degree bend specified. 7,6 - Element being connected must be the current element. 7,7 - Attempt to connect element to itself. 7,8 - Command defaults only legal for pipe components. 7,9 - Degenerate orientation 7,10 - Indeterminate orientation. X is East and Y is North assumed 7,11 - A HEAD ( TAIL ) P-Point may only be connected to the ARRIVE ( LEAVE ) P-Point of the FIRST ( LAST ) component 7,12 - No connection attribute in component 7,13 - No default P-Point for crosses, shoes etc. 7,14 - Can only connect a pipe component to an adjacent component or an appropriate PIPE HEAD or TAIL 7,15 - Illegal P-Point combination 7,16 - Indeterminate BRANCH P-Point. 7,17 - The element to which a BRANCH is to be connected must be specified. 7,18 - P-Point number exceeds connection array dimension 7,19 - A BRANCH may only be connected to a pipe component a NOZZLE or a BRANCH 7,20 - Cannot flip - not a pipe component 7,21 - Cannot connect BRANCH P-Point to ARRIVE / LEAVE P-Point of a pipe component which is not a BRANCH member 7,22 - BRANCH P-Point undefined. 7,23 - Can only connect to a pipe component which is positioned and orientated. 7,24 - Attribute not found 7,25 - Current element has no owner 7,26 - Current element is locked 7,27 - HSTUB not selected - SPEC undefined 7,28 - Cannot set return REF - Graph Table too large 7,29 - SYSTEM ERROR - Graph Table too large 7,30 - Trying to alter a read only database 7,31 - Attempt to connect to a read only database. Connection macro will be created. 7,32 - Cannot connect a BRANCH to itself 7,33 - Attempt to connect to a locked element 7,34 - Trying to create too many inter-database connection macros 7,35 - Only HANGERS and HANGER components can be connected to an ATTACHMENT point in this way. 7,36 - Point set does not allow variable angle. Angle is unchanged, direction is in correct plane. 7,37 - This P-Point is the ARRIVE or LEAVE ( in BACKWARDS mode ) P-Point. It is, therefore, not suitable for directing. 7,38 - There is no valid element in the BRANCH for a connect 7,39 - P-point #I is not the ARRIVE or LEAVE P-Point and so cannot be used for connecting. 7,40 - Cannot find a P-point of an adjacent element to connect to. ( Probably not selected ) 7,41 - Cannot find P-points of current element. ( Probably not selected ) 7,42 - Incompatible bores 7,43 - Hangers may not be connected to nozzles 7,44 - Attempt to create drawing reference in a read only database. InterDB macro will be created. 7,45 - Significant element must be CLAIMed before database can be updated 7,46 - Attempt to connect to a claimed element. Connection macro will be created. 7,100 - Y is 7,101 - and Z is 7,150 - HPOS 7,151 - HDIR 7,152 - HBOR 7,153 - HCON 7,154 - TPOS 7,155 - TDIR 7,156 - TBOR 7,157 - TCON 7,158 - POS 7,159 - DIR 7,160 - BORE 7,161 - CONN ************************************************************************************** 8 - GROCON ************************************************************************************** 8,1 - Element ID is not a plane 8,2 - Error obtaining transformation matrix 8,3 - Backing plane and sectioning plane do not form a rectilinear box 8,4 - Backing plane not properly oriented 8,5 - A subsidiary plane lies outside limits created by sectioning plane and backing plane 8,6 - Subsidiary plane not properly oriented 8,7 - Too many subsidiary planes 8,8 - Backing and sectioning planes coincident 8,9 - Subsidiary plane behind backing plane 8,10 - Subsidiary planes overlap 8,11 - Element ID is not a GROUP 8,12 - GROUP not named 8,13 - GROUP in wrong database 8,14 - Too many elements in section list 8,15 - Cannot get start element 8,16 - GROUP name #N does not exist - needed for DB #I 8,17 - GROUP name #N exists in DB#I not #I 8,18 - Name #N exists in db #I but is not a GROUP 8,19 - Cannot create GROUP WORLD 8,20 - Cannot create new GROUP 8,21 - Cannot name new GROUP 8,22 - * System Error * - cannot index more than #I dbs 8,30 - Command only legal for a GROUP 8,31 - Current element is locked 8,32 - Trying to alter a read only database 8,33 - Too many nouns 8,34 - Too many IDs specified 8,35 - Cannot refer to current GROUP ID 8,36 - Illegal Reference to another DB 8,37 - Attempt to create a circuit structure 8,38 - Cannot reference the WORLD 8,39 - #F is not a member of the current GROUP 8,40 - ** Warning ** : #F is already a member of the current GROUP 8,50 - Fatal Error - Module Quit 8,100 - ** Warning ** : New GROUP WORLD #F not named ************************************************************************************** 9 - PIPER ************************************************************************************** 9,2 - ** system error ** - illegal action number in setup 9,3 - Branch #F not routed 9,4 - No ROUTING PLANES defined 9,5 - COMPONENT cannot be selected 9,6 - No PENALTY VOLUMES defined 9,7 - No BORE set for #F 9,8 - No OBSTRUCTIONS defined 9,9 - GROUP to be routed is empty 9,10 - Cannot position TEE in #F 9,11 - AXES unset - LINE ABORTED 9,12 - Cannot orient TEE #F in #F 9,13 - Element #F is LOCKED 9,14 - BRANCH #F is LOCKED 9,15 - COMPONENT #F is LOCKED 9,16 - Too many PENALTY VOLUMES, OBSTRUCTIONS or ROUTING PLANES 9,17 - No DESIGN database 9,18 - No databases to work from 9,19 - Trying to alter a read-only database 9,20 - BRANCH #F connected to itself 9,21 - Too many ROUTING PLANES in one direction 9,22 - Too many nodes in routing network 9,23 - Too many iterations in route optimisation 9,24 - No logical route can be found 9,25 - Too many points in route found by PIPER 9,26 - Trying to route #F 9,27 - Routing plane #F already in list - Duplicates will be ignored 9,28 - Penalty volume #F already in list - Duplicates will be ignored 9,29 - Obstruction #F already in list - Duplicates will be ignored 9,30 - Axes are #F 9,31 - Axes are unset 9,32 - Routing Planes are : 9,33 - Penalty Volumes are: 9,34 - Obstructions are : 9,35 - UNSET 9,36 - Offset factor is #I 9,37 - Warning- Branch #F will be connected to #H (#F) of branch #F 9,38 - ** Warning ** - Penalty volume #F already in list 9,39 - Cannot orient #H 9,40 - End conditions limit exceeded 9,41 - Attempting to route to a point which has not been positioned 9,42 - Attempting to route #F to branch #F which has not been routed 9,43 - ** Error ** - Branch #F will not be connected to #H (#F) which was already connected to #F 9,44 - Branch #F #H has been disconnected from #F 9,45 - Significant element must be CLAIMed before database can be updated 9,100 - NPLANE IPLANE XPLANE 9,101 - NVOLUM VOLLIM 9,102 - NVOLUM VOLWTS VOLREF 9,104 - HEAD TO 9,105 - TAIL TO 9,106 - BRANCH 9,107 - NOZZLE 9,108 - TEE 9,109 - SHU 9,110 - AT 9,111 - Points defining branch 9,112 - HEAD to POINT at 9,113 - TAIL to POINT at 9,114 - END = 9,115 - ENDTYP ENDPAR 9,116 - Before RI conversion 9,117 - ANGLE = 9,118 - After RI conversion 9,121 - BRANCH 9,122 - Number of Bends = 9,123 - Number of Elbows = 9,124 - Total length = 9,125 - Node XNODES 9,126 - INDEX = 9,127 - TO COMP = 9,128 - TO TEE = 9,129 - INDEX = 9,130 - Network coordinates before sort 9,132 - Network coordinates after sort 9,134 - PIPVOL 9,135 - Element costs after applying PVOLS in PIPVOL 9,136 - NODE X-COST Y-COST Z-COST 9,141 - Number of iterations = #I 9,142 - Nodal costs after costing routine 9,143 - Nodal costs before costing routine 9,144 - NODE COST 9,145 - For direction #I 9,146 - COORD DELTA SQRT(DELTA) 9,147 - Initial element costs direct from coords in PIPNET 9,148 - Starting to route with following constraints: 9,149 - Routing Planes : 9,150 - Penalty Volumes: 9,151 - Obstructions : ************************************************************************************** 11 - RACKO ************************************************************************************** 11,1 - ID is not a BRANCH or a PIPING component 11,2 - The distance specified to DRAG a straight is close or equal to zero 11,3 - #F has wrong P-Point 11,4 - HEAP overflow 11,5 - STACK overflow 11,6 - ID element is LOCKED 11,7 - No RACK specified 11,8 - ID is not a PVOLU 11,9 - BOP and SPREAD directions must not be the same. respecify one or other. 11,10 - Too many element IDs for ordering 11,11 - Too many STRAIGHTS on RACK 11,12 - Trying to alter a read-only database 11,13 - No DESIGN database 11,14 - No databases to work from 11,15 - Significant element must be CLAIMED before database can be updated 11,100 - ELEMENT ORDERED 11,101 - HITS *--* 11,102 - UNUSED! 11,103 - THE DRAG OPERATION 11,104 - NO HITS 11,105 - LTYPE 11,109 - DIRECTION OF ORTHOGONAL STRAIGHT 11,112 - BRANCH #F has no straights orthogonal to spread direction on RACK #F 11,114 - LTYPE 11,116 - POS OF IMPINGING STRAIGHT 11,117 - IHIT 11,118 - ** WARNING - RACK OVERFLOW ** 11,119 - SPREAD DIR NOT DEFINED 11,120 - COMPONENT DIR NOT DEFINED 11,121 - ICURP = 11,122 - FEND IS 11,123 - TRUE 11,124 - FALSE 11,125 - Dummy branch #F at position #I has been replaced by real branch at position #I. 11,126 - The #F references #F, but the reference back (#F) does not match. 11,127 - Branch limit of #I exceeded. 11,128 - Bran #F at maximum branch depth(#I), ignored for this network(#F) (may be processed in another network). 11,130 - trace: #H #F references #F ( #I nrefs, stack level #I ). 11,131 - trace: #F connected to #H of #F (#I) already processed. ************************************************************************************** 14 - DATAL ************************************************************************************** 14,1 - Warning no design db 14,2 - No databases to work from 14,4 - Element does not exist 14,5 - World is not allowed 14,6 - Tab value too big 14,7 - Index overflow 14,8 - Attribute #H not found 14,9 - Error in references 14,10 - Element referenced by connection does not exist 14,11 - Too many levels 14,12 - Cannot get owner attribute of #F 14,13 - Cannot goto owner of #F 14,14 - Cannot find element of correct type 14,15 - Bad reference attribute 14,16 - No reference in array 14,17 - Comments may not be suppressed with INDEX on 14,18 - INDEX not allowed in NOCOMMENT mode 14,20 - Error retrieving UDA information for the current element 14,22 - ONLY not allowed in NEWFORMAT mode. Use OLDFORMAT 14,23 - Maximum nouns for ONLY command is #I 14,24 - PTWL is not allowed 14,25 - Error retrieving rule attribute for the current element 14,26 - Attribute #H of #F contains invalid ref no. (#F) 14,100 - DATAL Listing 14,101 - NEW 14,102 - AT 14,103 - AT 14,104 - OF 14,105 - ORI Y IS 14,106 - AND Z IS 14,107 - IN ZONE ORI Y IS 14,108 - AND Z IS 14,109 - ORIF 14,110 - POSF 14,111 - GADD 14,113 - FALSE 14,114 - TRUE 14,115 - P 14,116 - T 14,117 - I 14,118 - L 14,119 - M 14,120 - R 14,121 - --- REF INDEX --- 14,122 - THERE ARE NO NAMES 14,123 - --- NAME INDEX --- 14,127 - CONNECTIONS 14,128 - LAXE Y IS 14,129 - END 14,130 - - 14,131 - FROM 14,132 - TO 14,133 - LEN 14,134 - BY 14,135 - * DELETIONS 14,136 - * CREATIONS 14,137 - * MODIFICATIONS 14,138 - DELETE 14,139 - Cannot datal ISODRAFT database elements - use data OUTPUT ************************************************************************************** 15 - DATACON ************************************************************************************** 15,3 - MORE THAN TEN IDS. THE REST WILL BE IGNORED. 15,5 - WORLD IS NOT ALLOWED 15,7 - WARNING: RANGE OVERLAPS 15,8 - TOO MANY RANGES SPECIFIED 15,9 - REPEATED ID IN THE CHECK LIST 15,10 - NOTHING TO CHECK 15,11 - WARNING - TOO MANY ERROR REFS ONLY FIRST 1000 WILL BE STORED 15,21 - BAD OWNER REFERENCE 15,22 - REFERENCE SPREF UNSET 15,23 - REFERENCE SPREF REFERS TO A NON-EXISTENT SPCOM 15,24 - SPREF PROBLEM, CATREF IN SPCOM IS UNSET 15,25 - SPREF PROBLEM, CATREF IN THE SPCOM REFERS TO NON-EXISTENT #SCATALOGUE COMPONENT 15,26 - SPREF PROBLEM, GTYPE OF CATALOGUE COMPONENT IS NOT SAME AS TYPE #SOF DESIGN DATA COMPONENT 15,27 - ANGLE OF COMPONENT IS LESS THAN MINIMUM ANGLE #SSPECIFIED IN SPREF 15,28 - ANGLE OF COMPONENT IS GREATER THAN MAXIMUM ANGLE #SSPECIFIED IN SPREF 15,29 - CATREF PROBLEM IN ACCESSING P-POINTS FOR #F 15,30 - ARRIVE P-POINT NOT IN PTSET OF CATALOGUE COMPONENT 15,31 - LEAVE P-POINT NOT IN PTSET OF CATALOGUE COMPONENT 15,32 - REFERENCE CREF NOT SET 15,33 - REFERENCE CREF POINTS TO NON-EXISTENT ELEMENT 15,34 - BAD CREF RETURN REFERENCE 15,35 - REFERENCE CRFA #I NOT SET 15,36 - REFERENCE CRFA #I POINTS TO NON-EXISTENT ELEMENT 15,37 - BAD CRFA #I RETURN REFERENCE 15,38 - ARRIVE TUBE LESS THAN TUBE MINIMUM ACTUAL TUBE LENGTH IS 15,39 - BAD ARRIVE GEOMETRY 15,40 - BAD ARRIVE BORE 15,41 - BAD ARRIVE CONNECTION TYPE 15,42 - REFERENCE LSTUBE UNSET 15,43 - REFERENCE LSTUBE REFERS TO A NON-EXISTENT SPCOM 15,44 - LSTUBE PROBLEM, CATREF IN SPCOM IS UNSET 15,45 - LSTUBE PROBLEM, CATREF IN THE SPCOM REFERS TO NON-EXISTENT #SCATALOGUE COMPONENT 15,46 - LSTUBE PROBLEM, GTYPE OF CATALOGUE COMPONENT IS NOT SET TO TUBE 15,47 - LSTUBE PROBLEM IN ACCESSING PPOINTS 15,48 - LEAVE BORE NOT SAME AS BORE OF LSTUBE 15,49 - LEAVE CONNECTION TYPE NOT COMPATIBLE WITH CONNECTION #STYPE OF LSTUBE 15,50 - LEAVE TUBE LESS THAN TUBE MINIMUM ACTUAL TUBE LENGTH IS 15,51 - BAD LEAVE GEOMETRY 15,52 - LEAVE BORE NOT SAME AS TBORE 15,53 - LEAVE CONNECTION TYPE NOT COMPATIBLE WITH TCONN 15,54 - REFERENCE CATREF UNSET 15,55 - REFERENCE CATREF REFERS TO A NON-EXISTENT CATALOGUE COMPONENT 15,56 - INSULATION CAN NOT BE SELECTED 15,57 - ANGLE GREATER THAN #R DEGREES. ACTUAL ANGLE IS #R. 15,62 - #N REFERENCE NOT SET 15,63 - #N REFERENCE POINTS TO NON-EXISTENT ELEMENT 15,64 - BAD #N RETURN REFERENCE 15,65 - #N TERMINAL PROBLEM WITH SPREF 15,66 - #N TERMINAL PROBLEM WITH CATREF 15,67 - #N TERMINAL PROBLEM IN ACCESSING PPOINTS 15,68 - #N TERMINAL PROBLEM, P-POINT NO. DOES NOT EXIST 15,69 - DIRECTION #NDIR NOT SAME AS TERMINAL DIRECTION 15,70 - POSITION #NPOS NOT SAME AS TERMINAL POSITION 15,71 - #NBORE NOT SAME AS TERMINAL BORE 15,72 - CONNECTION TYPE #NCONN NOT SAME AS TERMINAL CONNECTION TYPE 15,73 - REFERENCE HSTUBE UNSET 15,74 - REFERENCE HSTUBE REFERS TO A NON-EXISTENT SPCOM 15,75 - HSTUBE PROBLEM, CATREF IN SPCOM IS UNSET 15,76 - HSTUBE PROBLEM, CATREF IN THE SPCOM REFERS TO NON-EXISTENT #SCATALOGUE COMPONENT 15,77 - HSTUBE PROBLEM, GTYPE OF CATALOGUE COMPONENT IS NOT SET TO TUBE 15,78 - HSTUBE PROBLEM IN ACCESSING P-POINTS 15,79 - HBORE NOT SAME AS BORE OF HSTUBE 15,80 - HCONN NOT COMPATIBLE WITH CONNECTION TYPE OF HSTUBE 15,81 - TUBE BETWEEN HEAD AND TAIL LESS THAN TUBE MINIMUM #SACTUAL TUBE LENGTH IS 15,82 - BAD HEAD TO TAIL GEOMETRY 15,83 - HBORE NOT SAME AS TBORE 15,84 - HCONN IS NOT COMPATIBLE WITH TCONN 15,85 - ISPEC REFERENCE POINTS TO NON-EXISTENT ELEMENT 15,86 - INSULATION CAN NOT BE SELECTED 15,87 - MAXANGLE must be in the range 0.0 to 180.0 15,88 - ATTACHMENT TYPE INVALID - MUST BE ONE OF #SFLOW, XXXX, SSSS, CCCC, CCNN, INPP, #SWELD, HANG, PENI, NUL, OR NULL 15,89 - BEND LENGTH BELOW MINIMUM TUBE LENGTH ACTUAL LENGTH IS 15,90 - BAD ARRIVE ALIGNMENT GEOMETRY, ANGLE IS #R 15,91 - BAD LEAVE ALIGNMENT GEOMETRY, ANGLE IS #R 15,92 - ARRIVE TUBE DOES NOT EXIST IN THE SPATIAL MAP, NO CLASH WILL BE DETECTED 15,93 - LEAVE TUBE DOES NOT EXIST IN THE SPATIAL MAP, NO CLASH WILL BE DETECTED 15,100 - DATACON LISTING 15,101 - Minimum tube length is : 15,102 - for Bores from 15,103 - THIS BRANCH HAS NO COMPONENTS 15,104 - BAD OWNER REFERENCE 15,107 - *--* NO DATA INCONSISTENCIES *--* 15,108 - to 15,109 - END 15,110 - Tolerance Offset is : 15,111 - Tolerance Angle is : 15,112 - Maximum Angle is : 15,113 - Tolerance Ratio is : 15,114 - Bore units are : 15,115 - Distance units are : 15,116 - Attachment checking : 15,117 - Bend checking : 15,118 - TOLERANCE SECTION 15,119 - DEFAULT 15,121 - #R #R 15,122 - Minimum range value is negative, 15,123 - Maximum range value is negative, 15,124 - Positive value will be used 15,125 - Limit on number of Section types exceeded 15,126 - Angle must be in the range 0.0 to 180.0 : 180.0 assumed. 15,127 - #R 15,128 - TOLERANCE ECCENTRICITY 15,129 - PJOINT 15,130 - SJOINT 15,131 - FITTING 15,132 - SECTION 15,133 - ANGLE 15,134 - DISTANCE 15,135 - RATIO 15,136 - TOLERANCE CATALOGUE 15,137 - CMPREF 15,138 - GMREF 15,139 - BORE 15,140 - Tolerance value out of range. Should be 1 to #I 15,141 - ISOMETRIC 15,142 - SKEY 15,151 - Catref / Specref of #F unset. 15,152 - Length of #F is out of range. #S Actual length is: 15,153 - Discrepancy between ends of Jlines: #H of #F and #H of #F. 15,154 - #F diverges from logical model: eccentricity out of range. 15,155 - #F diverges from logical model: angle out of range. 15,156 - Normal to Cutting plane #H of #F is perpendicular #Sto Neutral axis of #F. 15,157 - Normal to Cutting plane #H of #F is perpendicular #Sto Origin plane of #F. 15,158 - Cutting planes #H of #F and #H of #F misaligned. 15,159 - Positions of #F and #F misaligned. 15,160 - Pline #H of #F does not exist. 15,161 - POSL of #F unset. 15,162 - POSL of #F refers to non-existent Pline in #F. 15,163 - Incompatible Connection types between #F and #F. 15,164 - Incompatible Connection references between #F and #F. 15,165 - #F is not connected. 15,166 - Incompatible GTYP of #F: #H in Design, #H in Catalogue. 15,167 - Check Beta angles of #F and #F. 15,168 - Incompatible end Cutting planes of #F. 15,169 - #F lies off the beginning or end of owning Section #F. 15,170 - Normal to cutting plane #H of #F not in general direction #Sof other end of section. 15,171 - Jline of #F unset. 15,172 - Logical length of #F is zero. 15,173 - Invalid FLOW attribute 15,174 - #N TERMINAL PROBLEM INVALID FLOW ATTRIBUTE ON CONNECTED BRANCH 15,175 - #N TERMINAL PROBLEM INCONSISTENT FLOW ACROSS BRANCH CONNECTION 15,176 - Actual offset is : 15,177 - Actual angle is : 15,178 - Incompatible rod diameter between #F and #F. 15,179 - Arrive rod less than rod minimum, actual rod length is 15,180 - Leave rod less than rod minimum, actual rod length is 15,181 - Bad arrive rod diameter 15,182 - Bad leave rod diameter 15,183 - #NBORE not same as bore of #F. 15,184 - Reference LSROD unset 15,185 - LSROD refers to a non-existent SPCOM. 15,186 - LSROD problem, CATREF of SPCOM is unset 15,187 - LSROD problem in accessing ppoints 15,188 - Leave connection type not compatible with connection of LSROD. 15,189 - Leave rod diameter not same as rod diameter of LSROD 15,190 - Reference DETAIL unset 15,191 - DETAIL refers to a non-existent SDTEXT 15,192 - SKEY not set. 15,193 - SKEY #N is used with generic type #H, not #H. 15,194 - SKEY #N not known. Assumed to be user defined. 15,195 - SKEY #N is not allowed to be redefined 15,196 - Cannot have #H components based on generic type #H SKEYs. 15,201 - OWNER reference of SPCOM unset. 15,202 - Unable to goto OWNER of SPCOM. 15,203 - Warning! #F is in /*LIMBOSPEC. 15,211 - Trailing spans for vertices #F and #F inconsistent. 15,212 - #H's for vertices #F and #F inconsistent. 15,213 - #F lies off the beginning or end of span of #F. 15,220 - SJUST of #F does not have a sensible value 15,221 - Pfitting CRFA array includes invalid entry #F 15,222 - PFREF of Cofitting #F does not point back to Pfitting #F. 15,231 - Catref / Specref of #F refers to a non-existent element. 15,235 - Bad #H reference 15,251 - Spec error: Question #H asked more than once 15,252 - Spec error: Question TYPE never asked 15,253 - Spco error: #H not set 15,254 - Spco error: Unknown ref for #H 15,255 - Comp error: #H not set 15,256 - Comp error: Unknown ref for #H 15,257 - Ptset error: Duplicate ppoint number #I 15,258 - Ptset error: No ppoints set 15,259 - Ptset error: Unknown connection type #H for #F 15,260 - Comp error: GTYPE #H different from spec TYPE #H 15,261 - Ptset error: Non standard bore #B for #F 15,262 - Gmset error: Unknown parameter #I for #F 15,263 - Gmset error: Axis defined with unknown ppoint #I for #F 15,264 - Isometric error: ppoint#I not defined 15,265 - Isometric error: Cannot calculate angle between ppoint#I #Sand ppoint#I 15,266 - Isometric error: Incorrect angle between ppoint#I #Sand ppoint#I. Angle is #R and should be #R. 15,267 - Isometric error: Incorrect angle between ppoint#I #Sand ppoint#I. They should not be parallel. 15,268 - Gmset error: #F maybe a degenerate primitive 15,269 - Isometric error: ppoint1, ppoint2 and ppoint0 should be collinear. 15,270 - Gmset error: #F cannot be constructed 15,271 - Gmset error: Expression error for #F 15,272 - Spec error: SELE has no members 15,273 - Bolt error: Invalid bolt number #I 15,274 - Bolt error: Bolt cannot be selected. #S#N 15,275 - Bolt error: Unknown ref for #H 15,276 - Bolt error: Invalid bolt length 15,277 - Bolt error: Invalid bolt diameter 15,278 - Bolt error: Unset BLEN array 15,279 - Bolt error: Duplicate bolt number #I 15,280 - Bolt error: Additional Bolt Item #H cannot be selected 15,281 - Nominal Bore error: PURP should be set to BORE, BDIA, BLEN or ROD 15,282 - Nominal Bore error: #H unset 15,283 - Nominal Bore error: MMBOR is not approximately INCBOR times 25.4 15,284 - Nominal Bore error: #F is an exact copy 15,285 - Nominal Bore error: #F is an inconsistent copy: values of #H are the same but #H are different 15,291 - Bolt error: Invalid bolt thickness 15,292 - Bolt error: Invalid bolt thickness expression 15,293 - Bolt error: NOFF is negative ************************************************************************************** 16 - CATCON / INTERCAT ************************************************************************************** 16,2 - Too many points in line 16,3 - Multiplication factor too large - 1.0 assumed 16,4 - Attribute not found. 16,5 - Undefined axis 16,6 - Direction letter used twice 16,7 - Formulae store full - No more formulae accepted 16,8 - Constants store full - No more constants accepted 16,9 - System Error in GETFOR / LGTFOR 16,10 - System Error - Unrecognised function 16,11 - Value number used greater than values read in 16,12 - Hewlett - Packard stack full 16,13 - Parameter number out of range 16,14 - System Error - Constant not found 16,15 - Not enough values for operation 16,16 - Trying to divide by zero 16,17 - Trying to TAN 90 16,18 - Too many values or formulae 16,19 - Value must be in range 0.6 to 3276.7 16,20 - Negative power not allowed 16,21 - Angles must be in the range -180.0 to +180.0 16,22 - Illegal axis combination 16,23 - Illegal reference to PTSE. Deleted or changed? 16,24 - Illegal reference to GMSE. Deleted or changed? 16,25 - Boxing primitive should not be orientated by PAXI 16,26 - Impossible torus angle. Sample torus drawn 16,27 - Ppoint #I does not exist for design element #F on catalogue primitive #F . 16,29 - Ppoint #I points to itself, ( possibly via other Ppoints ). 16,30 - Do you really want a long chain of Ppoints referring to each other ? 16,31 - Ppoints referring to Ppoints not implemented 16,32 - The SCALE attribute is no longer used 16,33 - The "OF" notation should not be used within catalogue expressions 16,34 - RUSE cannot be set - dataset property expression contains the "OF" notation 16,35 - The "OF" notation should not be used in dataset expressions used as RPROPs 16,36 - WARNING: element does not have its own parameters and/or ppoints 16,37 - WARNING: No previous parameters and/or ppoints available to use 16,38 - RUSE cannot be set - dataset property contains a text expression 16,39 - Dataset expressions of type TEXT cannot be used as RPROPs 16,40 - Attribute #H should not be used in a catalogue rule or RPROP 16,41 - RUSE cannot be set for dataset property containing attribute #H 16,100 - TIMES 16,101 - TANF 16,102 - DIFFERENCE 16,103 - SUM 16,104 - SINF 16,105 - COSF 16,107 - ONE 16,108 - DDRADIUS 16,109 - DDANGLE 16,110 - DDHEIGHT 16,111 - 0 16,112 - - 16,113 - IPARAM 16,114 - PRIARP 16,115 - 16,117 - #I 16,118 - #R 16,150 - P 16,201 - Formula does not exist 16,202 - Catcon 16,203 - Specon 16,204 - Trying to remove the wrong formula from store 16,205 - Error in Hewlett - Packard formula stack 16,206 - Parameter, value or number out of range 16,207 - Obstruction level must be between 0 and 2 16,208 - Drawing levels must be in ascending order 16,209 - and in ascending order 16,210 - Blengths 16,211 - Cannot get parameter values 16,212 - Not a usable item 16,213 - *** WARNING *** - Component Ptref incompatible 16,214 - *** WARNING *** - Component Gmref incompatible 16,215 - *** WARNING *** - No component parameters set 16,216 - Not a Specification 16,217 - Ddangle 16,218 - Ddheight 16,219 - Ddradius 16,220 - Insulation spec not specified 16,221 - settings 16,222 - Cannot draw anything except with Sample Component. 16,223 - VAL 16,224 - PARAM 16,225 - PI 16,226 - ADD 16,227 - SUB 16,228 - MULT 16,229 - DIV 16,230 - SIN 16,231 - COS 16,232 - TAN 16,233 - POW 16,234 - SWAP 16,235 - ZXY 16,236 - COPY 16,237 - Formula 16,238 - Scale must be between 0.01 and 100.0 16,239 - Representation 16,240 - Level drawn: 16,241 - Tube: 16,242 - Insulation: 16,243 - Obstruction: 16,244 - Centreline: 16,245 - On 16,246 - Off 16,247 - Ppoints/num: 16,248 - Ppoint #I 16,249 - Design Component no longer exists 16,250 - Plines/Pkey: 16,251 - Model set 16,252 - Inspec 16,253 - Inspec parameter 16,254 - No Inspec parameters set. 16,255 - Cannot enter an expression unless in catalogue db - input ignored 16,300 - Pline 16,301 - Pline PLAXI attribute cannot refer to another Pline 16,302 - *** WARNING *** - Component Pstref incompatible 16,303 - *** WARNING *** - Component Gstref incompatible 16,304 - Illegal reference to PTSS. Deleted or changed? 16,305 - Illegal reference to GMSS. Deleted or changed? 16,306 - Parameterised argument not specified 16,307 - Plines referring to Plines not implemented 16,450 - X #R Y #R Z #R 16,457 - #I through X #R Y #R Z #R 16,458 - through X #R Y #R Z #R 16,464 - Window 16,465 - from X #R Y #R Z #R 16,466 - to X #R Y #R Z #R 16,475 - #I from X #R Y #R Z #R ************************************************************************************** 17 - SPECON ************************************************************************************** 17,1 - ACTIONS inhibited - no module change performed 17,2 - Cannot access ID 17,3 - Cannot access SPECIFICATION 17,4 - Cannot create SPCOM or SELEC 17,5 - Cannot create SPECIFICATION 17,6 - CATREF already used in heading 17,7 - Answers select previously defined #F 17,9 - DB unsuitable for SPEC 17,10 - DITTO IN FIRST LINE 17,11 - No SPECIFICATION defined 17,12 - ID #F does not correspond to column heading 17,13 - ID is not a SPEC 17,14 - Too many headings for output, maximum #I 17,15 - More answers than questions- extra answers ignored 17,16 - More defaults than questions extra defaults ignored 17,17 - More than #I HEADINGS 17,18 - DETAIL already used in heading 17,19 - Name already defined. #F will remain unnamed 17,20 - No. of QUESTIONS and ANSWERS do not match up 17,22 - Reserve name /*LIMBOSPEC has been used object with this name has been unnamed 17,23 - SPCOM does not exist 17,24 - SPEC does not exist 17,26 - This command only allowed in SPEC 17,27 - too many names 17,28 - TYPE required as first answer 17,29 - Unable to create TEXT element 17,30 - Unable to put CATREF 17,33 - Undefined name 17,34 - SPEC or an offspring is locked 17,35 - SPEC is not empty 17,36 - ID must be SPCOM 17,38 - No databases to work from 17,39 - No SPEC database 17,40 - TEXT longer than 50 characters 17,41 - Unable to put CMPREF 17,42 - Unable to put DETAIL 17,43 - Unable to put MATXT 17,44 - Unable to put BLTREF 17,45 - You may not delete /*LIMBOSPEC 17,46 - You cannot REMOVE SPEC - use REMOVE ALL 17,47 - You cannot REMOVE items from /*LIMBOSPEC 17,48 - MATXT already used in heading 17,49 - CMPREF already used in heading 17,50 - BLTREF already used in heading 17,51 - Spcom name #N already exists. New Spcom rejected. 17,52 - #H is not valid as a GTYPE 17,53 - TMPR already used in heading 17,54 - Unable to put TMPREF 17,100 - LINE ABORTED 17,101 - IN LINE 17,102 - OF MACRO 17,103 - NEW 17,104 - SPECIFICATION 17,105 - BORE UNITS 17,106 - DISTANCE UNITS 17,107 - HEADING 17,108 - NAME TYPE 17,109 - TYPE NAME 17,110 - CATREF 17,111 - CMPREF 17,112 - DETAIL 17,113 - DEFAULTS 17,114 - CSTREF 17,115 - TEXT 17,116 - MATXT 17,117 - BLTREF 17,118 - MATREF 17,119 - FLUREF 17,120 - RATING 17,121 - LINETYPE 17,122 - BSPEC 17,123 - BLTM ************************************************************************************** 23 - DETAILI ************************************************************************************** 23,1 - ERROR IN DETAILING TEXT FOR #F 23,2 - MISSING SPCOM FOR #F 23,3 - MISSING DTEXT FOR #F 23,4 - TROUBLE WITH HANDLE OR OFFLINE DIRECTION FOR #F 23,5 - TEXT TOO LONG 23,6 - VALUE OUT OF RANGE 23,7 - TOO MANY ITEMS 23,8 - ORTHOGONAL DIRECTION NOT ORTHOGONAL FOR #F 23,9 - SPECIAL FITTING #F FOUND WITH NO NAME REJECT PIPELINE #N ************************************************************************************** 24 - RECONFIGURER ************************************************************************************** 24,1 - System Error 24,2 - Cannot do resolving. Must either load a DUMP file load or do a reconfiguration 24,3 - Action number out of range 24,5 - Workfiles already quoted as destination 24,6 - Workfile1 24,7 - Workfile2 24,8 - Corrupt Database 24,9 - Database 24,10 - Workfiles already specified as source 24,11 - When using FROM FILES, Destination database must already exist 24,12 - DBVIRG file 24,13 - No Catalogue found 24,14 - No Specworld found 24,15 - Corrupt DB - Unable to get to World 24,16 - #N not found 24,17 - Unable to get to specified element 24,18 - Element type #H is not a world level element 24,19 - Copy List full - Maximum number #I - Command ignored 24,20 - No COPY command needed when source is files 24,21 - No Reconfiguration performed yet - Line Aborted 24,22 - Cannot do a dump. Must either load a DUMP file load or do a reconfiguration first 24,23 - Invalid code in file - reconfiguration terminated. Previous code #I 24,24 - No Reference No. Table to work from 24,25 - MDB not found 24,26 - TEAM not found 24,27 - Illegal combination of commands: No source quoted yet 24,28 - Illegal combination of commands: No destination quoted yet 24,29 - Illegal combination of commands: No copy list quoted yet 24,30 - Dump File 24,31 - Load File 24,32 - Cross-reference File 24,33 - Cross-reference or Load File not set 24,34 - System error in reading dump file 24,35 - System error in writing dump file 24,36 - Illegal combination of commands - Destination already quoted 24,37 - Illegal combination of commands - Source File already quoted 24,38 - Source File 24,39 - Destination File 24,40 - Working DB 24,41 - Reference DB 24,42 - Working DB is not a copy of Reference DB 24,43 - Unable to open DT table subsystem 24,44 - Working DB is a reconfigured copy of Reference DB 24,45 - No Reconfigured copy of Working DB 24,46 - Reconfigured Working DB 24,47 - FROM DB must be specified before TO NEW db is given 24,48 - DB not found 24,49 - Unable to create NEW db 24,50 - Unable to open newly created DB, number #I 24,51 - You cannot use the SESSION option unless copying from a DB 24,52 - You cannot use the SESSION option unless copying to file 24,53 - Error occurs when COMPILING Dictionary DB 24,54 - You cannot use the SESSION option unless copying ALL elements 24,55 - The "OVERWRITE" option can not be used for the system DB 24,56 - The "OVERWRITE" option can not be used for the global DB 24,57 - The "TO" DB must be an MULTIWRITE DB to be compatible with the FROM data 24,58 - The "TO" DB must be an UPDATE DB to be compatible with the FROM data 24,60 - not found 24,61 - on non existent ufd 24,62 - in use 24,63 - cannot be created due to full ufd 24,64 - cannot be created due to full disc 24,65 - already exists 24,66 - file error number #I 24,67 - DB incorrectly initialised 24,68 - DDL Revision number is #I not #I 24,69 - Actions turned off 24,70 - Element #F, attribute #H has ref to =#I/#I- not reset 24,71 - Cannot set attribute 24,72 - File #N is not a valid database 24,73 - Reconfigurer Data File does not exist 24,74 - Error in opening work file to copy DRAFT picture file (for element #F) to 24,75 - TO and FROM DBs must be different - use COPY in DESIGN or DRAFT for copying within a DB 24,76 - Error in opening DRAFT picture file (for element #F) 24,77 - Message 77 24,78 - Error in copying DRAFT picture file (for element #F) to work file 24,79 - Message 79 24,80 - Warning! DRAFT picture file for element #F (version #I) does not exist. Use "UPDATE PICTURE" command in DRAFT. 24,81 - Message 81 24,82 - Error in creating DRAFT picture file for element #F (version #I) 24,83 - Message 83 24,84 - Error in copying DRAFT picture file for element #F (version #I) 24,85 - Message 85 24,86 - Message 86 24,87 - Message 87 24,88 - Error, unable to update header record for picture file on element #F. 24,89 - Message 89 24,90 - Message 90 24,95 - Error, cannot copy an element below a #H. 24,96 - Warning - Attribute truncated 24,97 - Dabacon error #I occurred on SAVEWORK. Reconfigurer aborted for DB 24,98 - Reconfigurer aborted for DB 24,100 - Index Table ============= 24,101 - *** Pass one initiated *** 24,102 - *** Pass one completed *** 24,103 - *** Pass two initiated *** 24,104 - *** Pass two completed *** 24,105 - No current reconfigured copy 24,106 - ** unset ** 24,107 - locked 24,108 - unlocked 24,109 - 24,110 - 24,111 - 24,112 - Report of Modifications made to 24,113 - of project 24,114 - Reporting carried out by: 24,115 - Using: 24,116 - Working Database: 24,117 - Latest Reconfigured Copy: 24,118 - Database Type : 24,119 - 24,120 - 24,121 - (Reference Numbers in the Reconfigured Copy are prefixed by = ,all others are prefixed by a ##.) 24,124 - Destination undefined, Root #F ignored 24,126 - Resetting references for DB #N 24,127 - Unable to open DB #N for resetting refs 24,128 - No refs to reset for DB #N 24,129 - Resetting complete for DB #N 24,131 - Database #N cannot be updated - it is in use 24,132 - Database #N has been updated 24,133 - Session #I saved 24,135 - EC 24,136 - Phase one complete - starting phase two 24,137 - EN 24,138 - Error Count Exceeded - Reconfig aborted 24,139 - Duplicate root in copy list. 24,140 - Root #N ignored. 24,141 - Root #F ignored. 24,143 - Unable to get to 24,144 - ,Element Ignored 24,146 - ***Reconfiguration Completed 24,147 - Elements were not defined in DDL 24,148 - Elements have been lost 24,149 - Elements are no longer named 24,150 - Attributes were incorrectly defined 24,151 - Elements were not inserted. 24,155 - The spatial map on the TO database has been marked as incomplete 24,156 - KERROR #I getting attribute #H for element #F 24,157 - Unable to reset references for #F as element is claimed 24,158 - Cannot use "SESSIONS" option with a SYSTEM or GLOBAL DB 24,159 - Cannot use "SESSIONS" option with a COMPARATOR DB 24,160 - DB number of data in file #I is not the same as TO DB number of #I 24,161 - Extract number of data in file #I is not the same as TO DB extract number of #I 24,162 - Errors occurred during reconfiguration, changes have not been written back. You can use RECONFIG FORCE opti... 24,163 - #F is not of suitable type to be reconfigured into #F; ignored ************************************************************************************** 27 - PROPCON ************************************************************************************** 27,2 - ACTION No. out of range 27,3 - Not at suitable element 27,4 - Cannot find card 27,5 - Too many fields 27,6 - No. of characters greater than field width 27,7 - CATY not found in heading file ************************************************************************************** 32 - PSA5 INTERFACE ************************************************************************************** 32,1 - Network incomplete at #F 32,2 - Network incomplete at HEAD of #F 32,3 - Network incomplete at TAIL of #F 32,4 - No ATTACHMENT point at #F 32,5 - WARNING - Pipe network incomplete at #F 32,6 - #F has more than 10 connection references 32,7 - HEAD/TAIL reference of #F is incorrect 32,8 - PSA5 MACRO not produced because of errors 32,9 - WARNING - ATTACHMENT POINT with LEND=TRUE not at end of network 32,10 - No ANCHOR 32,11 - #F not in network 32,12 - ERROR in getting transformation matrix from #F 32,13 - Output not produced because of errors in network 32,14 - No more output produced because of errors in PROPERTIES 32,15 - No RUNDATA 32,16 - Cannot generate PSA5 name for #F 32,17 - PSA5 name store overflow. Maximum number of names is #I 32,18 - WARNING - No cases for #F 32,19 - ERROR - #F has too many activated cases ( more than #I ) 32,20 - ERROR - #F has no head tube specification (HSTU) 32,21 - ERROR - No leave tube specification (LSTU) for #F 32,22 - #F has no tail tube specification 32,23 - Cannot generate any more PSA5 names 32,24 - Cannot use feet and inches in PSA5 input macro 32,25 - Too many cases ( more than #I ) 32,26 - APPLICATION text '#N' not found 32,27 - UCONST with no stiffness at #F in LAXES direction #I 32,28 - UCONSR with no stiffness at #F in LAXES direction #I 32,29 - UCONST with no stiffness at #F in LAXES direction #I 32,30 - UCONSR with no stiffness at #F in LAXES direction #I 32,31 - LCONST with no stiffness at #F in LAXES direction #I 32,32 - LCONSR with no stiffness at #F in LAXES direction #I 32,33 - Illegal displacement at #F in LAXES direction #I 32,34 - Illegal rotation at #F in LAXES direction #I 32,35 - LCONST with illegal displacement at #F in LAXES direction #I 32,36 - LCONSR with illegal rotation at #F in LAXES direction #I 32,37 - Tube-type components cannot be special (at #F) 32,38 - LEND=FALSE for ATTA at #F 32,39 - Wrong APPLICATION TEXT at #F 32,40 - SPECIAL component #F is bent 32,41 - Illegal cold pull at #F in direction #I 32,42 - #F is not just a COLD PULL 32,43 - Too many COLD PULLS at #F ************************************************************************************** 33 - ISOMETRIC DETAILING MODULE ************************************************************************************** 33,1 - Invalid paper size, use:- A0 --> A4 or AA --> AE 33,2 - ISO 1,2,3,4 only allowed 33,3 - AREA must be between 1 & 10 33,4 - TEST/PARAMETER n m : n OUT OF RANGE 0 - 9 33,5 - TEST/PARAMETER n m : m OUT OF RANGE 1 - 10 33,6 - Unset 33,7 - ON 33,8 - OFF 33,9 - Precision Bores 33,10 - NOMINAL 33,11 - ACTUAL 33,12 - Charsize 33,13 - Invalid MessageAccuracy RADIAL #I - set to #I 33,14 - Invalid MessageAccuracy ITERATIONS #I - set to #I 33,15 - MessageAccuracy RADIAL 33,16 - MessageAccuracy ITERATIONS 33,17 - UK 33,18 - EUR 33,19 - USA 33,20 - Date 33,21 - (Dimension line standout distance) 33,22 - Dimensions 33,23 - SUPPORT 33,24 - LEFT 33,25 - RIGHT 33,26 - TOP 33,27 - BOTTOM 33,28 - Margin 33,29 - DetailPlots 33,30 - UP 33,31 - DOWN 33,32 - Direction 33,33 - Size 33,34 - A#I 33,35 - WIDTH 33,36 - HEIGHT 33,37 - File AND DXF 33,38 - Frame 33,39 - Reserve 33,40 - FallingLines 33,41 - DEGREES #I 33,42 - RATIO #I 33,43 - PERCENTAGE #I 33,44 - GRADS #I 33,45 - IMPERIAL #I 33,46 - METRIC #I 33,47 - Isotype 33,48 - COMBINED 33,49 - ERECTION 33,50 - FABRICATION 33,51 - COMBINED ERECTION 33,52 - COMBINED FABRICATION 33,53 - ERECTION FABRICATION 33,54 - SPOOL 33,55 - NONE 33,56 - DRWG 33,57 - LINE 33,58 - OVERALL 33,59 - Stack 33,60 - Detail plots secondary direction inconsistent with primary direction 33,61 - DESCRIPTION 33,62 - NODESCRIPTION 33,63 - Code #I 33,64 - Lspacing #I 33,65 - OVERFLOW 33,66 - DUMMY 33,67 - #N MULTIPLE 33,68 - #N SINGLE 33,69 - PlottingScale 33,70 - File 33,71 - Detail 33,72 - Revision 33,73 - File DXF 33,74 - PictureScale 33,75 - #I ALONG 33,76 - #I ACROSS 33,77 - #I PERCENT 33,78 - #I DRWGS 33,79 - STRING 33,80 - Supports 33,81 - Stacking 33,82 - ISO 33,83 - BOX 33,84 - InsulationControl 33,85 - TracingControl 33,86 - Split 33,87 - Wastage AREA #I #I 33,88 - Weldnumbers 33,89 - SMALL 33,90 - MEDIUM 33,91 - LARGE 33,92 - Weldtype 33,93 - SITE 33,94 - FABRICATION 33,95 - FORCESITE 33,96 - Diagnostics USER #I 33,97 - Test #I #I 33,98 - Dimdistance 33,99 - LooseFlangeAllowance 33,100 - METIMP 33,101 - IMPERIAL 33,102 - METRIC 33,104 - OFF ALL 33,105 - EMPTY 33,106 - The DETAIL list :- 33,107 - ADD 33,108 - The REMOVE list :- 33,109 - REMOVE 33,110 - Invalid #N in ISODRAW return file 33,111 - ISODRAFT MESSAGE FILE #N 33,112 - -------- ------- ---- ----------- 33,113 - Title #I 33,114 - Value must be between 1 and 25 33,115 - Atext #I 33,116 - Value must be between 201 and 500 33,117 - FT 33,118 - Delimiter 33,119 - SupportFile 33,120 - Paper Length #I 33,121 - PAPER LENGTH must be greater than ZERO 33,122 - VALUE must be an integer between 0 & 999 33,123 - SPEC REF #F gives material code (#N) longer than max of #I characters 33,124 - VALUE between 1 & 20 only. 33,125 - ATsymbol 33,126 - COLON 33,127 - PLUS 33,128 - DOT 33,129 - AND 33,130 - Diagnostics ISODAT #I 33,131 - Diagnostics ISOPLOT #I 33,132 - NAME 33,133 - Instname 33,134 - Keys #I 33,135 - CLEAR UNSET 33,136 - CLEAR SET 33,137 - CuttingList 33,138 - Cutmarks 33,139 - MatlistFile 33,140 - MatControl 33,141 - MaterialList 33,142 - SpoolNumbers 33,143 - Underlayplot 33,144 - SymbolFile 33,145 - MessageFile 33,146 - TransferFile 33,147 - #F is not named 33,148 - PLOT FILENAME PREFIX has not been specified 33,149 - SYSTEM ERROR Unable to scan pipe network Check data consistency report and flow directions at bran... 33,150 - #F cannot be detailed - invalid element type 33,151 - Detail plotfile #N for #F not found 33,152 - #F cannot be removed - invalid element type 33,153 - Spool prefix from DB (attribute SPLP of #F) not found 33,154 - Angles 33,155 - The DETAIL list is empty 33,156 - A fatal error has occurred in ISODRAW 33,157 - No pipes have been processed successfully 33,158 - HV 33,159 - No branches in #F 33,160 - #F will not be detailed 33,161 - WARNING: Not all pipes have been processed 33,162 - HEAD & TAIL refs of #F refer to the same component but head & tail positions are not close enough to that component. 33,163 - HEAD & TAIL refs of #F refer to the same component and head & tail positions are the same. 33,164 - Component #F refers to a BRANCH ( #F ) which does not refer back to it. 33,165 - The HEAD of #F is connected to #F but the positions are not the same. 33,166 - The TAIL of #F is connected to #F but the positions are not the same. 33,167 - ELEMENT #F is not a piping component. 33,168 - Cannot find flange connected to PPOINT #I 33,169 - Cannot find end of WAFER at #F 33,170 - Tags 33,171 - TOTALLED 33,172 - No non-standard BOLT lengths for #F LENGTH is #R 33,173 - No long enough non-standard BOLT lengths for #F 33,174 - No SPCOM for #F 33,175 - No BOLTS for #F at #F 33,176 - Invalid specref #F for #F or connected tube 33,177 - Cannot get DETAIL info. on #F 33,178 - Cannot get MATXT info. on #F 33,179 - Reference datum #F is un-named 33,180 - PWAST attribute from #F out of range 0.00 - 100.0 33,181 - ITEMCODES 33,182 - #F connected to #F but not the other way round. 33,183 - #F not close enough to #F 33,184 - ARRIVE or LEAVE PPOINT greater than 4 33,185 - Multiway component #F has unexpected connection to #F 33,187 - Both legs of #F refer to the same BRANCH but positions are not the same. 33,188 - Both legs of #F refer to the same BRANCH and positions are the same. 33,189 - One leg of #F is connected to #F but the positions are not the same. 33,190 - No branch in #N is connected to an equipment nozzle 33,191 - Cannot open Message File : ERROR #I 33,192 - #F is not part of an equipment trim 33,193 - Message file not set 33,194 - Starting to detail #F 33,195 - #F is not in the network 33,196 - #F has already been detailed 33,197 - PERPLOTFILE 33,198 - Warning: Grid Reference number for #F is unset - setting to 1 33,199 - Error in determining bolting for #F 33,200 - Unable to access PIPE SPEC #F 33,201 - Tagging 33,202 - FlowArrows 33,203 - Bad connection to #F 33,204 - ProjectNumber 33,205 - Ignore 33,206 - Mark 33,207 - PERSPOOL 33,208 - Weldid 33,209 - with #I lines 33,210 - Paper size set to maximum of #I 33,211 - Starting at #F 33,212 - Off leg #F 33,213 - Branch initialise #F 33,214 - Offset 33,215 - Angle #R 33,216 - WORL /* 33,217 - Axes 33,218 - BRANCH 33,219 - COMPONENT 33,220 - Box 33,221 - Specbreak 33,222 - FABRICATIONONLY 33,223 - ERECTIONONLY 33,224 - Attaname 33,225 - SPREF 33,226 - DRAWING 33,227 - Tolerance 33,228 - Warning: Weldnumbers are Fromdb, but WMAX of #F is #I 33,229 - Please carry out weld-numbering check in DESIGN Spooling Application 33,231 - Cannot find BOLT SPCOM with BLTREF #F for #F 33,232 - Cannot open symbolfile #N for writing - opening readonly 33,233 - READONLY 33,234 - WRITE 33,235 - Warning: Material list has short itemcodes from more than one pipe spec 33,236 - Cannot allocate bolts 33,237 - System contains flanged components with both OLD and NEW bolting methods 33,238 - Pipe contains flanged components with both OLD and NEW bolting methods 33,239 - WARNING! The syntax " 33,240 - " will not be valid after PDMS 11 Use " 33,241 - #R" 33,242 - #R INCH" 33,243 - WARNING! - Weld box option not appropriate if weld numbering from database - Option ignored. 33,244 - NOBOX 33,245 - PIPEONLYSEPARATE 33,246 - default 33,247 - SKEY scale factor must be between #I and #I - value reset to 100% 33,248 - Bad format for SPCOM name #N - use ITEMCODE LENGTH LONG 33,249 - Mtexts 33,250 - IGNORE 33,251 - Must specify SpoolNumbers Fromdb if PartNumbers Perspool Fromdb 33,252 - Unable to locate text '#N' within itemcode 33,253 - Message 253 33,254 - Bolting 33,255 - Units 33,256 - METRIC lengths IMPERIAL bores 33,257 - Cannot mix spooling and pipe elements when detailing as a system 33,258 - Spooling element is not up to date 33,259 - Spooling element is not connected 33,260 - Spooling element is not up to date and is not connected 33,261 - length description 33,262 - Internal error in detail list 33,263 - length itemcode 33,264 - APPEND 33,265 - INSERT at '#N' 33,266 - OVERWRITE 33,267 - #F - Illegal or Inaccessible Reference Datum point 33,268 - Reference datum #F - Orientation has been modified to prevent Doubleback Dimension error 33,269 - Dimension omitted for Reference datum #F - Doubleback Dimension 33,270 - Branch end coordinates :- 33,271 - AT Pipe 33,272 - AT Nozz 33,273 - AT Open 33,274 - AT Clos 33,275 - AT Vent 33,276 - AT Dran 33,277 - AT Misc 33,278 - Coords 33,279 - ISOPOST executable not defined in ISOPOST module entry 33,280 - ISOPOST module not defined in this project 33,281 - A fatal error has occurred in ISOPOST 33,282 - FormatFilename 33,283 - Error opening ISOPOST workfile: #N 33,284 - Error writing ISOPOST workfile: #N 33,285 - Error opening cut pipe format file: #N 33,286 - No comparison date or Stamp set 33,287 - ContinuationSymbols 33,288 - Error - Reserved area is greater than picture height 33,289 - Boltfile not set 33,290 - Cannot set #I lines per page - less than #I 33,291 - No bolts found 33,292 - BoltFile 33,293 - Cannot open boltfile : ERROR #I 33,294 - Starting Bolt Report for #F 33,295 - Bolting OFF 33,296 - WORLD 33,297 - #F 33,298 - OPTIONS DEFAULT 33,299 - Illegal scale factor found for line flow arrow - default scale 8 used 33,300 - Inline 33,301 - Itemcode 33,302 - Message 302 33,303 - Length 33,304 - Valves 33,305 - Instruments 33,306 - Pcoms 33,307 - Traps 33,308 - Vents 33,309 - Filters 33,310 - DEFAULT 33,311 - Prefix 33,312 - CllengthFile 33,313 - Insulation 33,314 - from 33,315 - String 33,316 - Composite 33,317 - Overall 33,318 - Elevation 33,319 - Hangers OPPOSITE strings 33,320 - Hangers ALONGSIDE strings 33,321 - INTERSECTION 33,322 - VERTICAL 33,323 - VERTICAL and DIMENSIONS 33,324 - Message 324 33,325 - SpecChanges 33,326 - CutpipelistFile 33,327 - Zerolengthskews 33,328 - Fallskews 33,329 - THREEDBOX 33,330 - TWODBOX 33,331 - Illegal HREF connection on #F 33,332 - Illegal TREF connection on #F 33,333 - Contents of symbol library #N :- 33,334 - Old symbol keys 33,335 - New symbol keys 33,336 - #N 33,337 - No symbols defined in library #N 33,338 - Writable user defined symbol library file has not been specified 33,339 - Symbol key #N has been redefined in the symbol library 33,340 - Limit of #I user defined symbols exceeded 33,341 - Symbol key #N rejected 33,342 - Symbol #N has been added to the symbol library 33,343 - Error in updating symbol library 33,344 - New symbol library #N created 33,345 - Unable to create new symbol library #N 33,346 - Error reading symbol library #N 33,347 - Unable to locate key #N in symbol library 33,348 - Row number #I is outside the range 1-999 33,349 - Table number #I is outside the range 1-999 33,350 - Limit of #I user positional #N records exceeded 33,351 - Character height #D exceeds maximum limit of #D. #D used 33,352 - Symbol library file #N does not exist 33,353 - Additional weld numbers for #F will not be included on the isometric 33,354 - Charheight 33,355 - CharHeight 33,356 - Direction HORIZONTAL 33,357 - Direction VERTICAL 33,358 - Rows #I Columns #I 33,359 - Message 359 33,360 - ALL 33,361 - Option number #I is outside the allowed range 1-140 33,362 - Option Debug #I #I 33,363 - Balloon size #I is outside the allowed range 1-5 33,364 - with balloon size #I 33,365 - The no of components :- #I is outside the allowed range 1-50 33,366 - OFF #I 33,367 - based on #N 33,368 - SPOOLNumbers must be positioned with table parameters 33,369 - TextPosition 33,370 - Text 33,371 - Skewbox 33,372 - FULL 33,373 - TRIANGLE Standout 33,374 - TRIANGLE NSTD Standout 33,375 - Attribute 33,376 - SystemAttribute 33,377 - #F is a spool/field element and cannot be removed 33,378 - System table data cannot be displayed unless detailing a system 33,379 - Hatch 33,380 - MARK DETAIL/REVISION options invalid when detailing spooling elements - command ignored 33,381 - Change 33,382 - DISTANCE 33,383 - DIAMETER 33,384 - Standard 33,385 - Standard #R DIAMETER 33,386 - Bend radius outside allowable range 0 to 50 D 33,387 - Illegal value for bend radius 33,388 - Bendradius 33,389 - LONG 33,390 - SHORT 33,392 - Highlighting 33,393 - Tapping 33,394 - Scale 33,395 - Colour 33,396 - Coordinates 33,397 - Rule 33,398 - Message 398 33,399 - Maximum of 20 nested PCOM tappings exceeded 33,400 - EquipmentNumbering 33,401 - Truncate 33,402 - NOZZLE 33,403 - LIST 33,404 - NoPicture 33,407 - Warning - There is no standard spindle skey #N 33,408 - Plottingscale limits (50-100%) exceeded - reset to 100 33,409 - Number #I 33,410 - Unable to extract data for UDA key: #I 33,411 - Message 411 33,412 - with Boxstyle 33,413 - on 33,414 - STRAIGHT 33,415 - ANGLED 33,416 - ROUND 33,417 - TRIANGULAR 33,418 - DIAMOND 33,419 - Outcom Blank 33,420 - Outcom 33,421 - UDA #N ignored. Maximum number of 50 exceeded 33,422 - Tubesplits 33,423 - of 33,424 - PERDRAWING 33,425 - SUFFIX 33,426 - SINGLE 33,427 - SUFFIX SINGLE 33,428 - Leglength 33,429 - Repeatability 33,430 - Returnfilename 33,431 - ENDPREPARATIONS 33,432 - Pipe #N requires addition of split ATTA(s) by DESIGN macro 33,433 - Invalid #F detected in return file 33,434 - Invalid ISOTYPE for DETAIL SHEET. Detail ignored. 33,435 - Invalid ISOTYPE or SPOOLNUMBER option for DETAIL SPOOL. Detail ignored. 33,436 - System isometrics are not available for detail SHEET or detail SPOOL. 33,438 - Equipment trims are not available for detail SHEET or detail SPOOL. 33,439 - Spool #N 33,440 - Sheet #N 33,441 - Sheet Single 33,442 - Message 442 33,443 - Message 443 33,444 - No such Cutback rule set 33,445 - Invalid ISOTYPE for REMOVE SHEET. Remove ignored. 33,446 - Invalid ISOTYPE or SPOOLNUMBER option for REMOVE SPOOL. Remove ignored. 33,447 - Unable to create split atta associated with #F 33,448 - on threadedends 33,449 - Pipe contains split ATTA - Repeatability ON ignored 33,450 - Cutback 33,451 - on all bend 33,452 - with 33,453 - none 33,454 - CRITICAL 33,455 - CENTRELINE 33,456 - STOPPING Branch Connections 33,457 - Overall dimensions are not available with ISOTYPE SPOOL 33,458 - Overall dimensions suppressed for ISOTYPE SPOOL 33,459 - (Treated separately for different text after delimiters.) 33,460 - (Ignore any text after delimiters.) 33,461 - Dtexts 33,462 - Invalid type #F for DETAIL SPOOL/SHEET. DETAIL ignored. 33,463 - Invalid type #F for REMOVE SPOOL/SHEET. REMOVE ignored. 33,464 - ONLY 33,465 - ACROSS Branch Connections 33,466 - XTEXT 33,467 - YTEXT 33,468 - ZTEXT 33,469 - RTEXT 33,470 - STEXT 33,471 - TTEXT 33,472 - Detailing interrupted by user 33,473 - Overallskews 33,474 - Leglength set to minimum value of 6mm 33,475 - SEPARATE 33,476 - TOTAL 33,477 - Leglength set to maximum value of 18mm 33,478 - Cannot find flange connected to #H of #F 33,479 - Cannot allocate bolts for #F 33,481 - Error reading binary IDF 33,482 - Error writing to ASCII IDF 33,483 - Error formatting data for ASCII IDF 33,484 - Error writing binary IDF 33,485 - Error reading ASCII IDF format 33,486 - Error reading ASCII IDF 33,491 - Error extracting itemcode from #N of specref #F for #F or connected tube 33,492 - Error extracting itemcode from specref #F for #F or connected tube 33,493 - Error extracting itemcode from #N attribute of #F for bolt #F 33,494 - Error extracting itemcode from bolt #F 33,500 - Overlay number must be between 1 and #I 33,501 - Message 501 33,502 - Underlay file #N does not exist. Command ignored. 33,503 - Underlay filename is already on list. File name ignored. 33,504 - Processing transfer file #N 33,505 - Error in opening message file #N 33,506 - Error in opening workfile 33,507 - Error in opening transfer file 33,508 - Error at line #I of transfer file 33,509 - Unable to process transfer file #N - Command ignored. 33,510 - Refdimensions 33,511 - Specified UDA not available on #H elements 33,513 - X 33,514 - Y 33,515 - Xoff 33,516 - Yoff 33,517 - Angle 33,518 - ContNotes 33,519 - PIPE 33,520 - DRWG 33,521 - BOTH 33,522 - Attribute #H of #F has no NAME - cannot set continuation drawing 33,523 - Attribute #H of #F not found or unset - no continuation drawing 33,524 - Descriptions 33,525 - JointNumbers 33,526 - SHIFTJIS 33,527 - EUC 33,528 - Character height #D is less than minimum of #D. #D used 33,529 - PartNumbers 33,530 - FROMDB 33,531 - GENERATED 33,532 - Cannot specify bend table if PartNumbers not from database 33,533 - Cannot specify bend table file if PartNumbers not from database 33,534 - Attribute data #N is too wide to fit into column width #I - truncated 33,535 - Preprocess must have value 1 to #I 33,536 - Postprocess must have value 1 to #I 33,537 - Preprocess 33,538 - Postprocess 33,539 - ASCBIN 33,540 - Fill 33,541 - Heading 33,542 - NoHeading 33,543 - AngleAccuracy must be 0 or 1 (max accuracy) 33,544 - Angle must be between 0 and 360 degrees. 33,545 - CAREA attribute unset, text "AREA" written to Compipe MTO file. 33,546 - CompipeFile 33,547 - Compipe 33,548 - MTO PIPE 33,549 - MTO DRWG 33,550 - Itemcodes USER 33,551 - Itemcodes CLIENT 33,552 - Supports ON 33,553 - Supports OFF 33,554 - Descriptions SHORT 33,555 - Descriptions LONG 33,556 - WeldTableFile 33,557 - BendTableFile 33,558 - #N table is file only and no file has been specified 33,559 - Title block text is limited to #I characters, plus optional underscore 33,560 - Partial 33,561 - Hatch spacing value is less than the minimum allowed. Default value used 33,562 - Hatch spacing value exceeds the maximum allowed. Now set to #I 33,563 - Partial hatching value is less than the minimum allowed. Default value used 33,564 - Partial hatching value exceeds the maximum allowed. Now set to #I 33,565 - EXTENDED 33,566 - PTDIRFTUB 33,567 - Text positioning attribute #N for #F is invalid or unset 33,568 - The #N standout distance is the same as the #N standout distance 33,569 - No columns defined for #N table 33,570 - Text positioning attribute #N not valid for SYSTEM 33,571 - Sort attribute #N not included in weld table 33,572 - System 33,573 - Invalid column number. Must be between 1 and #I 33,574 - Invalid column width 33,575 - Fall AccuracyLevel must be 0, 1 or 2 (max accuracy) 33,576 - AngleAccuracy 33,577 - AccuracyLevel 33,578 - FileOnly 33,579 - AUTOMATIC 33,580 - characters 33,581 - BendTable 33,582 - RevisionTable 33,583 - SystemTable 33,584 - WeldTable 33,585 - SortBy 33,586 - FORWARDS 33,587 - REVERSE 33,588 - Corner 33,589 - BL 33,590 - BR 33,591 - TL 33,592 - TR 33,593 - Empty 33,594 - Width 33,595 - Column width #I too small for title '#N' - width set to #I 33,596 - ContWelds 33,597 - Cannot add columns to non-existent #N table 33,598 - Sort attribute #N number #I not included in weld table 33,599 - Column #I of #N table created - NoHeading Empty Width #I 33,600 - Columns 33,601 - TableDefinition 33,602 - Column 33,603 - with Width 33,604 - FROMSPCOM 33,605 - and 33,606 - Number of AppWare texts exceed maximum #I 33,607 - Part number (attribute #H) for #F not found 33,608 - Part number (attribute #H[#I]) for #F not found 33,609 - #F has invalid part number #I (attribute #H) 33,610 - #F has invalid part number #I (attribute #H[#I]) 33,611 - Navigation error searching for bolts part number for #F 33,612 - Bolts part number for #F - #F is part of a different system 33,613 - Bolts for connection #F - #F excluded from isometric 33,615 - Text element #F STEXT #N does not convert to a valid pipe/branch name 33,616 - Cannot specify weld table if WeldNumbers not from database 33,617 - Cannot specify weld table file if WeldNumbers are not on 33,618 - Weld number (attribute WLDN) for #F not found 33,619 - #F has invalid weld number #I (attribute WLDN or AWELDS) 33,620 - Weld attribute #N for #F is invalid or unset 33,621 - Logical 33,622 - TRUE 33,623 - FALSE 33,624 - #F is not named - cannot detail drawing 33,625 - Revision attribute :REV0 is not included in revision table 33,626 - Revision table attribute :REV0 for #F not found or unset 33,627 - Invalid attribute #H for revision table - must be a UDA 33,628 - Starting to detail SYSTEM #N 33,629 - Starting to detail EQUIPMENT TRIM #N 33,630 - System #N will not be detailed. 33,631 - Equipment trim #N will not be detailed. 33,632 - No bolt report possible for #F 33,633 - Detailing #F 33,634 - ShortCode 33,635 - PipenameDelimiter 33,636 - Prefix 33,637 - Suffix 33,638 - System table attribute #N for #F is invalid or unset 33,639 - ShortCode is not a valid option for #N table 33,640 - ShortCode has not been defined for system table 33,641 - Compipe option cannot be set for #N isometrics 33,642 - Cannot detail a branch with Compipe option 33,643 - AppWareText 33,644 - unset 33,645 - Invalid AppWareText keyword text 33,646 - LAST MEMBER 33,647 - NEW ATTA 33,648 - BEFORE 33,649 - CONN TO PT 33,650 - CONN TO PH 33,651 - PARTNUMBER 33,652 - DESCRIPTION 33,653 - BORE 33,654 - ITEMCODE 33,655 - QUANTITY 33,656 - REMARKS 33,657 - OTHER 33,658 - CONN TO NEXT 33,659 - CONN TO PREV 33,660 - POS DIST 33,661 - FROM PL OF PREV 33,662 - ATTY XXXX SELECT ORI 33,663 - Cannot write a DESIGN macro for split ATTA in #F 33,664 - DESIGN macro written by ISODRAFT for db 33,665 - Writing a DESIGN macro for db #N 33,666 - DESIGN macro file #N created 33,667 - Cannot create DESIGN macro #N 33,672 - Maximum number of DESIGN macros is #I 33,673 - Cannot create DESIGN macro 33,675 - Adding Split ATTA in 33,676 - Branch is in db #N 33,677 - Line Thickness must be between 1 and 10; default is 3 33,678 - LineThickness 33,679 - #H UDA 33,680 - Cannot write a DESIGN macro to change attributes of #F 33,681 - Changing attributes in 33,682 - REV #I 33,683 - DETA TRUE 33,684 - COMPONENT 33,685 - Outcom Triplets 33,686 - Outcom BlankTriplets 33,687 - Cannot define material list table if PartNumbers not from database 33,688 - Linespacing limits (70-200%) exceeded - reset to 100 33,689 - Cannot specify bend table with Bendradius OFF 33,690 - Bltrefs #F and #F have inconsistent number or diameter of bolts 33,691 - ContJoints 33,692 - Module executable #N does not exist 33,693 - ISODRAW executable not defined in ISODRAW module entry 33,694 - ISODRAW module not defined in this project 33,695 - ISODRAW Symbolfile #N does not exist 33,696 - ISODRAW symbolfile not defined in ISODRAW module entry 33,697 - No plotfiles were produced 33,698 - No status information available for isodraw run 33,699 - No sheet information found 33,700 - No status flag for drawing 33,701 - Plotfile #I does not exist 33,702 - Drawing #I does not exist 33,703 - Failed 33,704 - Plotted 33,705 - Plot 33,706 - DXF 33,707 - Both 33,708 - Isodraw did not run - or failed. 33,709 - Symbol keys defined in DRAFT symbol file are:- 33,710 - Skey 33,711 - based on 33,712 - No symbol file has been defined 33,713 - No symbol definitions exist in the symbol file 33,714 - To modify the contents of a new style symbol file - use the DRAFT module 33,715 - No parameterised plotfiles have been defined. 33,716 - Parameterised plotfile names are:- 33,717 - ATTRIBUTE 33,718 - HEIGHT 33,719 - ANGLE 33,720 - Number of Parameterised attributes is #I 33,721 - PLOTDETAILDATA 33,722 - Character height must be > 0 33,723 - #I 33,724 - HYPERPLANT 33,725 - DEBUG 33,726 - X value must be > 0 33,727 - Y value must be > 0 33,728 - Angle must be in the range -180 to +180 33,729 - No parameters have been defined 33,730 - Parameterised Attributes are:- 33,731 - Parameter #I does not exist 33,732 - RelativeTo 33,733 - Boxed 33,734 - Data for Detail plotfile #N not found 33,735 - Detailplots are undefined 33,736 - MANUAL 33,737 - When redefining spindle keys a new SKEY must be given 33,738 - Environment variable PDMSWK unset 33,739 - Error opening Cut-Piece report workfile: #N 33,740 - Unable to write to formatted Cut-Piece report file 33,741 - Unable to open formatted Cut-Piece report file 33,742 - Unbalanced % characters in Cut-Piece file 33,743 - Environment variable unset in Cut-Piece file 33,744 - Insufficient values found in Cut-Piece file 33,745 - Unable to open Cut-Piece csv file for reading 33,746 - Unable to open formatted Cut-Piece file for reading 33,747 - Unable to open Cut-Piece appware data file for writing 33,748 - Unable to write to Cut-Piece appware data file 33,749 - A fatal error has occurred when producing the Cut-Piece report 33,750 - #F has already been added to the detail list 33,751 - #F has not been added to the detail list 33,752 - #F has invalid reference to associated RWELD element 33,753 - Warning: Numbers are Fromdb, but #H of #F is #I Please carry out numbering checks in SPOOLER 33,754 - Warning: Pulled Bend number for #F is invalid or unset 33,755 - PBendNumbers 33,756 - Warning: Joint number for #F is invalid or unset 33,757 - Pulled bend numbering only possible when detailing SPOOLER elements - PBendNumbers option ignored 33,758 - There is no standard skey #N 33,759 - Cannot overwrite standard SKEY #N 33,760 - SKEY #N is not user-definable 33,761 - There is no base skey #N for component of type #H 33,762 - Cannot have #H components based on generic type of #H 33,763 - AWELDS 33,764 - BALLOONS #I 33,765 - ELLIPSE 33,766 - Attexts none 33,767 - Attexts 33,768 - Warning: some Attexts have been truncated 33,769 - in Millimetres 33,770 - in Metres 33,771 - Warning: Defined material list table when PartNumbers are not from database 33,772 - Cannot Exit from Isodraft 33,773 - PARTNUMBER 33,774 - ContSheets ************************************************************************************** 34 - ISOSPOOL ************************************************************************************** 34,1 - Cannot use reserved name #N 34,2 - Message file name not defined 34,3 - File #N is wrong filetype 34,4 - Pipe Length 34,5 - Hit Tolerance Factor (default 1) 34,6 - You did not hit anything within the hit radius 34,7 - Invalid name #N, name unset 34,8 - Cannot encode ADD element 34,9 - File name contains suspect character #N 34,10 - Named message file #N has invalid name 34,11 - Use cursor to pick a component connection point 34,12 - Use cursor to pick a point on a pipe (the star marker indicates the reference end of the pipe) 34,13 - Critical options have changed; please re-process this IDF 34,14 - Named material list file #N has invalid name 34,15 - No isometrics produced, please check error messages and adjust options 34,16 - IDF not defined 34,17 - Cannot successfully convert #N to ASCII 34,18 - Cannot successfully convert #N to binary 34,19 - File #N does not exist 34,20 - Cannot process #N binary files 34,21 - ElbowSubstitution 34,22 - ItemCodeSubstitution 34,23 - Error opening Add File 34,24 - Cannot successfully interrogate IDF #N 34,25 - Plotfile/DXF file name prefix not defined 34,26 - Error writing to Add File 34,27 - Named plotfile/DXF file name prefix #N is invalid 34,28 - Existing plotfile/DXF files (consecutive from #N001) are: 34,29 - #N 34,30 - None 34,31 - File #N is not a PDMS binary IDF 34,32 - File #N is not an ASCII IDF 34,33 - File #N is not a PDMS binary plotfile 34,34 - File #N is already an underlay file 34,35 - Invalid underlay number; must be 1-#I 34,36 - File #N not found 34,37 - System variable #N not defined 34,38 - System variable PDMSWK (#N) is not an existing directory 34,39 - Cannot copy data into transfer file #N 34,40 - Cannot find executable file #N in %ISOSPOOL% 34,41 - Cannot create communication file #N 34,42 - Fontfile name (prefix) not defined 34,43 - Invalid view direction; must be 1-4 34,44 - IDF 34,45 - Fontfile 34,46 - File #N already exists - append not allowed 34,47 - BulkMTO 34,48 - Date 34,49 - TODAY 34,50 - IDF 34,51 - Fileprefix 34,52 - No break point identified 34,53 - DXF 34,54 - Units Output 34,55 - Units Input 34,56 - MM 34,57 - INCH 34,58 - Fontfile #N 34,59 - Named fontfile #N does not exist 34,60 - Named font file #N has invalid name 34,61 - Cannot add break - pipe not identified 34,62 - Invalid 34,63 - Named cut pipe list file #N has invalid name 34,64 - Cannot decode ADD element 34,65 - None 34,66 - Component reference 34,67 - ItemCode Substitution file #N does not exist 34,68 - SINGLEPASS 34,69 - File #N is an empty file or the wrong filetype 34,70 - Spools 34,71 - Plotfile 34,72 - Distance is greater than length of pipe 34,73 - Error opening ASCII transfer file #N 34,74 - Error reading ASCII transfer file #N 34,75 - Error reading HIT file #N 34,76 - File #N is not a Bechtel 3DM ASCII IDF 34,77 - Cannot find length of pipe 34,78 - Cannot open ISODRAW return file #N 34,79 - Invalid sheet number #I (there are #I sheets) 34,80 - Endprotectors Itemcode: 34,81 - Endprotectors Description: 34,82 - Endprotectors have itemcode but no description 34,83 - Endprotectors have description but no itemcode 34,84 - Pipe Distance 34,85 - Use cursor to pick an existing break (marked by a star) 34,86 - Current break 34,87 - Length 34,88 - Sheet 34,89 - At XR 34,90 - YR 34,91 - Current sheet number 34,92 - Automatic change to ISOTYPE SPOOL 34,93 - Fatal error detected by SPLASH forcing program abort 34,94 - Cannot open file #N 34,95 - File #N is not a PDMS ASCII IDF 34,96 - File #N is not a PDS ASCII IDF 34,97 - binary 34,98 - ASCII 34,99 - A spool break already exists at this position 34,100 - Workfile suffix 34,101 - Invalid command with SINGLEPASS option 34,102 - Distance 34,103 - FINCH 34,104 - Cannot process #N ASCII files 34,105 - File #N is not a CV ASCII IDF 34,106 - File #N is not a FORTRAN binary IDF 34,107 - Privileges not sufficient for file #N 34,108 - Error opening file #N 34,109 - File #N is not a PASCE ASCII IDF 34,110 - PipeSpec 34,111 - Lbor 34,112 - Hbor 34,113 - Radius 34,114 - D 34,115 - TangentLength 34,116 - Hbor is less than Lbor 34,117 - Radius is invalid multiple of diameter 34,118 - Error opening MATC file #N 34,119 - Premature EOF in ASCII transfer file #N 34,120 - Premature EOF in HIT file #N 34,121 - Bulk MTO requested, but MATC filename not set 34,122 - Inconsistent bolt units in MATC file #N 34,123 - Inconsistent dimensional units in MATC file #N 34,124 - Error writing to Bulk MTO File 34,125 - BulkMTO ProjectIdentifier 34,126 - BulkMTO BatchReference 34,127 - Underlay file #N does not exist 34,128 - Cannot create elbow substitution file #N 34,129 - Number 34,130 - Cannot add MATF file to Bulk MTO - dimensional units different 34,131 - Options other 34,132 - Standard 34,133 - IDF 34,134 - Cannot decode hit file record 34,135 - Cannot decode IDF record 34,136 - Cannot substitute bends for elbows when IDF contains part numbers 34,151 - No IDF filetype in command line 34,152 - Invalid IDF filetype in command line 34,153 - Error reading IDF 34,154 - Error with communication file 34,155 - IDF file contains TAB characters 34,156 - No suffix in command line 34,157 - Cannot find name of message file in IDF 34,158 - Error opening message file 34,159 - Error opening error return file 34,171 - IDF file contains less than 11 records 34,172 - Error opening IDF 34,174 - Error opening ASCII IDF 34,175 - Error reading binary IDF 34,176 - Error writing to ASCII IDF 34,179 - Error opening message file 34,181 - Error converting binary record into ASCII format 34,183 - No binary IDF name in command line 34,201 - No ASCII IDF name in command line 34,202 - Error opening binary IDF 34,203 - Invalid data in communication file 34,204 - Error opening ASCII IDF 34,206 - Error writing IDF record 34,207 - Error opening ItemCode Substitution File 34,209 - Error opening message file 34,210 - Error writing to binary IDF 34,211 - Error reading reformatted IDF record 34,212 - Error in ItemCode Substitution File - Missing substitute itemcode 34,213 - Error reading ASCII IDF 34,214 - Error in ItemCode Substitution File - ItemCode too long 34,215 - Error in ItemCode Substitution File - Substitute ItemCode too long 34,216 - Error in ItemCode Substitution File - Substitute description too long 34,217 - ItemCode Substitution File empty 34,218 - Invalid option in communication file 34,219 - Error opening ADD file 34,220 - Error opening Elbow Substitution file 34,223 - Error with communication file 34,224 - IDF file contains less than 11 records 34,225 - Error reading communication file 34,226 - Error opening output ASCII IDF 34,227 - Invalid add records found in ADD file 34,229 - Error writing to output ASCII IDF 34,230 - Logic error - attempt to re-spool without initial run 34,232 - Error reading ADD file 34,233 - Error reading ItemCode Substitution File 34,234 - IDF file has incorrect format records 34,235 - Invalid code in IDF 34,236 - Invalid code in communication file 34,237 - Invalid record in ADD file 34,238 - Error reading reformatted option block 34,239 - Elbow substitution has failed 34,240 - Fatal error detected by Graphics Package forcing program exit ************************************************************************************** 35 - FLEXlm system messages ************************************************************************************** 35,1 - FLEXlm Lost connection to server for #N, forcing exit from PDMS. 35,2 - FLEXlm Lost connection for #N, reconnection attempt #I of #I (interval: #I secs). 35,3 - FLEXlm Lost connection for #N, reconnection attempt #I of #I. 35,4 - FLEXlm Re-connected to server for #N after #I of #I retries (interval: #I secs). 35,5 - FLEXlm Re-connected to server for #N after #I of #I retries. ************************************************************************************** 36 - DABACON INTEGRITY CHECKER INITIALISATION ************************************************************************************** 36,1 - Error trying to open file - #N -Filing error #I 36,2 - DB #N not found! 36,3 - Cannot open ERROR file 36,4 - ***************************** * DATABASE INTEGRITY REPORT * ***************************** 36,5 - **** Warning - DB is #R% full **** 36,6 - DB is #R% full 36,7 - DB #N is not at this location ************************************************************************************** 37 - Integrity Errors ************************************************************************************** 37,1 - #I INTEGRITY ERRORS 37,250 - Element #X 37,251 - Previous name is #N 37,252 - Current name is #N 37,330 - #I Reference attribute warnings! 1st #I output only. 37,374 - External ref encountered, whilst EXTERNAL REJECT option used 37,375 - 37,376 - 37,377 - 37,378 - Invalid entry #X in claim list 37,379 - (External references have not been validated) 37,380 - Name Table corrupt 37,381 - Invalid ref #X found in Name Table - Error #I 37,382 - Entry out of sequence in Name Table for ref #X 37,383 - Zero length name for ref #X found in Name Table 37,384 - Duplicate entry found in Name Table 37,385 - Two refs #X, #X associated with same name in Name Table 37,387 - Total no. of entries in Name Table = #I 37,388 - Error - template DB type #H is invalid 37,389 - Error - template major version number #I is invalid 37,390 - Warning- Attribute #H contains a ref #X to an element of the wrong type 37,391 - Warning- Attribute #H contains invalid ref #X 37,393 - Member element #X has incorrect owner ref 37,394 - Member element #X is wrong type for owner 37,395 - Member element #X is duplicated in the member list of #X 37,397 - Total no. of elements checked = #I 37,398 - Total no. of ref attributes found = #I 37,399 - Total no. of external references = #I 37,400 - No. of errors in Name Table = #I 37,401 - No. of invalid ref attributes = #I 37,402 - No. of ref attributes pointing to wrong element type = #I 37,403 - No. of member elements with incorrect owner ref = #I 37,404 - No. of member elements of incorrect type for owner = #I 37,405 - No. of member elements duplicated in owners member list = #I 37,412 - Total no. of pages checked = #I 37,415 - Error - #I pages of type PAGE 1 found 37,416 - No. of page 1 errors = #I 37,417 - Page 1 error - more than 1 ext refno found for extract #I 37,418 - Page 1 error - invalid db no. in ext refno #X 37,419 - Element #X has invalid owner #X 37,420 - Element #X is not in the member's list of its owner #X 37,421 - No. of errors in header page = #I 37,422 - #I session pages checked (#R %) 37,423 - No. of session page errors = #I 37,424 - #I element pages checked (#R %) 37,425 - No. of element page errors = #I 37,426 - #I table pages checked (#R %) 37,427 - No. of table page errors = #I 37,428 - No. of pages with invalid type = #I (#R %) 37,429 - #I hunk pages checked 37,430 - Dabacon version #I database incompatible with DICE for DABACON 2 37,431 - Header page error - incorrect db number (= #I) 37,432 - Header page error - incorrect extract number (= #I) 37,433 - Header page error - invalid multi-user flag 37,434 - Variant setting on DB is not the same as that recorded in the system DB 37,435 - Header page error - incorrect owning extract number (= #I) 37,436 - Header page error - invalid potentially inconsistent flag 37,437 - Header page error - invalid template db type 37,438 - Header page error - invalid template major version number #I 37,439 - Header page error - incorrect db no. in next id 37,440 - Header page error - incorrect extract no. in next id 37,441 - Header page error - invalid extract no. in member extract id 37,442 - 37,444 - Error in session #I - unable to read previous session page #I 37,445 - Error in session #I - page for previous session is not a session page 37,446 - Error in session #I - incorrect session no. = #I on previous session page 37,447 - Error in session #I - unable to read owning session page #I 37,448 - Error in session #I - page for owning session is not a session page 37,449 - Error in session #I - page for owning session is not for earlier date 37,450 - Error in session #I - invalid primary session flag 37,451 - Error in session #I - invalid claim list root page id 37,452 - Error in session #I - Claim list root page id refers to wrong page type 37,453 - Error in session #I - Claim list root page is not in this extract 37,454 - Error in session #I - invalid index root page id 37,455 - Error in session #I - index root page id refers to wrong page type 37,456 - Error in session #I - invalid table root page id 37,457 - Error in session #I - table root page id refers to wrong page type 37,458 - Error in session #I - table root page id refers to table of wrong name 37,459 - Error in session #I - unable to read last data page (#I) of session 37,461 - Fatal read error - unable to read last session page #I 37,462 - Fatal read error - unable to read beyond page #I of this extract 37,463 - ** WARNING ** Expected last page is #I - file could be truncated 37,464 - Error - unable to read header page on owning extract 37,465 - Error - extract not in member list of owning extract 37,466 - Fatal db opening error - unable to open an extract db without its master 37,468 - Invalid page type #I, Session no. #I, page no. #I - no checks made 37,469 - Invalid table level #I, Session no. #I, page no. #I - no checks made 37,472 - Inconsistency in level #I #H table, session no. #I, page no. #I - 37,473 - Error in level #I #H table, session no. #I, page no. #I - 37,474 - table contains reference #X to another database 37,475 - table contains invalid internal refno for ext refno #X 37,476 - Error - internal refno #X in INDEX table does not point to an element page 37,477 - Error - external refno #X in INDEX table does not match that on element 37,478 - text key #N not in ascending order 37,479 - external refno key #X not in ascending order 37,480 - table contains invalid lower level page id 37,481 - lower level page no.#I (extract #I) not a table of correct type 37,482 - incorrect level no. #I on lower level page no. #I (extract #I) 37,483 - inconsistent key length on lower level page no. #I (extract #I) 37,484 - inconsistent data length on lower level page no. #I (extract #I) 37,485 - incorrect value of first key on lower level page no. #I (extract #I) 37,486 - incorrect value of last key on lower level page no. #I (extract #I) 37,499 - No. of pages at level #I = #I (#R %) 37,500 - No. of pages at level 9 or higher = #I (#R %) 37,501 - Average freespace per page at level #I = #R words 37,502 - Average freespace per page at level 9 or higher = #R words 37,508 - Fatal error - invalid last page id on last session page 37,509 - Fatal error - header page not found 37,510 - Error on element page no. #I, session no. #I 37,511 - Invalid internal ref (#X) for Dynamic Attribute block 37,512 - Internal ref (#X) for Dynamic Attribute block points to wrong block type 37,513 - External ref #X on Dynamic Attribute block differs from that on element (#X) 37,514 - Actual total length #I of Dynamic Attribute block differs from expected length #I 37,515 - Invalid internal ref (#X) for Member List block 37,516 - Internal ref (#X) for Member List block points to wrong block type 37,517 - External ref #X on Member List block differs from that on element (#X) 37,518 - Actual total length #I of Member List block differs from expected length #I 37,519 - for element with external refno #X 37,520 - Table has pointer to page #I which is beyond the end of the session 37,521 - Incorrect entry for assigning reference number. This may lead to dabacon error 529. This error h... 37,522 - Incorrect number for assigning next set of reference numbers when creating an element. This erro... 37,523 - Element #X has an inconsistent entry in the spatial map. This may result in a Dabacon error 534 ... 37,524 - Element #X has an inconsistent entry in the name table. Name exists on the element but is not in... 37,525 - Element #X has an inconsistent entry in the name table. Name exists in the table but no name ex... 37,526 - Element #X has an inconsistent entry in the name table. Name exists in the table but a differen... 37,527 - Invalid entry in Dabacon table #H. Element #X does not exist. Please reconfigure the DB to resolve this problem 37,528 - Invalid entry in Dabacon table #H. Element #X has no equivalent value to that in the table. Please reconfig... 37,529 - Invalid entry in Dabacon table #H. Element #X has a different value to that in the table. Please reconfigur... 37,530 - Invalid entry in Dabacon table #H. Element #X has null reference value in the table. 37,531 - Entry missing from Dabacon table #H. Element #X has reference to element #X which is not recorded in the ta... 37,532 - Child extract has a different db number, #I 37,533 - Child extract #I not listed on header page 37,534 - PATCH: Extract #I has been added to header page list 37,535 - Child extract #I on header page not listed in system db 37,536 - PATCH: Child extract #I not listed in system db has been removed from header page list 37,537 - Attempt to patch failed 37,538 - DB number in system db does not correspond; #I in header, #I in system db 37,539 - Extract number in system db does not correspond; #I in header, #I in system db 37,540 - Database has no structural errors 37,541 - 37,545 - ** DATABASE CONTAINS FATAL ERRORS** 37,546 - ** FATAL ERROR ** 37,550 - STATISTICS FOR NAME TABLE PAGES 37,551 - =============================== 37,552 - STATISTICS FOR INDEX TABLE PAGES 37,553 - ================================ 37,554 - STATISTICS FOR CLAIM LIST TABLE PAGES 37,555 - ===================================== 37,556 - STATISTICS FOR INTEGER TABLE PAGES 37,558 - STATISTICS FOR OTHER TABLE PAGES 37,559 - Percentage of freespace on element pages #R 37,560 - Dynamic Attribute block (#X) has length (#I) less than header length (#I) 37,561 - Dynamic Attribute block (#X) has length (#I) such that appears to span page boundary 37,562 - Dynamic Attribute block (#X) contains DA with null name at position #I 37,563 - PATCH: Expected length of Dynamic Attributes has been set to #I for element #X 37,564 - It may be possible to correct this error using the PATCH option (CHECKOPT PATCH ON): We strongly recommend tak... 37,565 - Data blocks end unexpectedly within DA data 37,566 - Member list block (#X) has length (#I) less than header length (#I) 37,567 - Member list block (#X) has length (#I) such that appears to span page boundary 37,568 - Member list block (#X) contains null data at position #I 37,569 - PATCH: Expected length of Member List has been set to #I for element #X 37,601 - 37,602 - Maximum number of allowable errors #I has been reached. 37,603 - ** DATABASE CHECK ABORTED ** 37,604 - OVERALL STATISTICS 37,605 - ================== 37,700 - Element #F is not in parent extract claim list 37,701 - PATCH: Element #F now claimed in parent extract 37,702 - In parent extract element #F is claimed to a different user/extract 37,703 - Element #F needs to be marked in parent extract, as being claimed to this extract in parent extract 37,704 - Element #F needs clearing from claimlist in parent extract 37,705 - PATCH: Element #F cleared from claim list in parent extract 37,706 - Unexpected error code #I checking parent claim list for element #F 37,707 - More than #I mismatches found in claim list 37,708 - Unexpected error #I from claim list check 37,709 - Unable to access claim table 37,710 - Element #F is claimed to extract #I, not a child 37,711 - PATCH: Element #F cleared from claim list 37,712 - Unable to access bucket list 37,713 - Unable to access bucket list in extract #I 37,714 - Bucket #I has also been found in extract #I 37,715 - Unable to search index table in extract #I 37,716 - Bucket is #X but element with reference #X found 37,717 - PATCH: Bucket adjusted to #X 37,718 - Next bucket is #I but maximum permitted number of buckets is #I 37,719 - Next bucket is #I but bucket #I found in extract #I 37,720 - Max bucket no is #I but bucket #I found in extract #I 37,721 - Bucket #I has been lost 37,722 - PATCH: Bucket #X has been created 37,723 - PATCH: Bucket #X removed: CAUTION: Any current user of this db may be thrown out at next SAVEWORK 37,724 - Master extract number is #I but bucket #I found in extract #I 37,725 - Cannot get member #I in member list of element #X, error #I 37,726 - However, global database is not primary at this location, and therefore error may be because it is out of date 37,727 - However, parent extract is not primary at this location, and therefore error may be because it is out of date 37,728 - However, not all extracts in family are primary at this location, and therefore error may be because a databas... 37,729 - Patching not permitted; database is not primary at this location 37,730 - Warning: Database is not primary at this location 37,731 - Patching not permitted when checking file 37,732 - WARNING: Extract tests will not be performed on file 37,733 - FATAL ERROR: Unable to read page 0 of file 37,734 - FATAL ERROR: First page is not a header page 37,735 - FATAL ERROR: Nonsence last session page number #I 37,736 - FATAL ERROR: File appears to have been truncated; no usable data found 37,737 - Last session page is set to #I, but last usable session page found to be #I (session number #I) 37,738 - Use the PATCH option to reset last session 37,739 - PATCH: Last session page has been set to #I (session number #I) 37,740 - ERROR: File cannot be opened as a database file 37,741 - Attempting to open and analyse as a binary file 37,742 - System database is of incorrect type: #H 37,743 - Cannot locate world element 37,744 - Unexpected error #I navigating database at #F 37,745 - #F is not named 37,746 - Unexpected error #I getting name of #F 37,747 - Invalid database name: #N 37,748 - PATCH: Database #N has been renamed as #N 37,749 - Database name #N is invalid in team #N 37,750 - Unable to open file associated with #F 37,751 - #F has database number #I, but file header gives database number as #I 37,752 - #F has extract number #I, but file header gives extract number as #I 37,753 - #F is of type #H, but file header gives type as #H 37,754 - #F has access mode #N, but file header gives access mode as #N 37,755 - #F has more than one member of type #H 37,756 - #F is unnamed; expect to be called #N 37,757 - #F should be named #N 37,758 - #F does not have a member of type #H 37,759 - PATCH: Deleting #F 37,760 - #F does not have a member of type #H 37,761 - PATCH: #F has been created 37,762 - PATCH: #H of #F has been set to #I 37,763 - PATCH: #H of #F has been set to #I (#N) 37,764 - PATCH: #H of #F has been set to #I (#H) 37,765 - #F does not have a member of type #H called #N 37,766 - PATCH: #F has been renamed as #N 37,767 - Working extract #F is owned by unnamed database #F 37,768 - Working extract #F has invalid extract number #I 37,769 - Working extract #F should have name #N 37,770 - Working extract #N has been renamed as #N 37,771 - Extract owning session #I does not exist in owner (extract #I), (dabacon error #I) 37,772 - Unable to access index table 37,773 - PATCH: Invalid entry #X in claim list has been removed 37,774 - Unexpected dabacon error #I attempting to remove invalid entry #X from claim list 37,775 - Unable to locate member previous pretend session in parent 37,776 - Linked pretend session does not match member previous pretend session on parent 37,777 - However, this could be valid if the extract's primary location is in a different time zone from that of its owner 37,778 - PATCH: Element #X has been added to the member's list of its owner #X 37,779 - Attempt to patch failed: Element #X is not of valid type for member list of owner #X 37,780 - Attempt to patch failed: Owner #X does not have a member list 37,781 - Attempt to patch failed: Element #X could not be added to member list of owner #X; error #I 37,782 - Attempt to patch failed: Unable to remove child #X from parent #X; error #I 37,783 - PATCH: Child #X removed from parent #X 37,784 - PATCH: Subsequent instance of child #X removed from parent #X 37,785 - Unable to run in patch mode: cannot obtain write access to db 37,786 - Unable to SAVEWORK: error #I 37,787 - Element #X has invalid element member at position #I 37,788 - PATCH: Invalid element at position #I in member list of #X removed 37,789 - PATCH: Incorrect name #N removed from name table 37,790 - Attempt to patch failed: Unable to remove incorrect name #N from name table 37,791 - PATCH: Name #N inserted into name table for element #X 37,792 - Unable to patch: Name #N cannot be inserted into name table for element #X because it already exists for element #X 37,793 - Attempt to patch failed: Unable to add name #N to name table for element #X (Dabacon error #I) 37,794 - Unexpected error #I initiating name table search (unable to check name table) 37,795 - Unexpected error #I getting attribute #H entries for element #X 37,796 - PATCH: Invalid entry in table #H for element #X removed (primary key = #I) 37,798 - Attempt to patch failed: Unexpected error #I 37,799 - PATCH: Missing entry in table #H for element #X added 37,800 - Unable to patch; cannot ascertain the data values required 37,801 - PARTIAL PATCH: The spatial map table has been repaired to prevent data integrity errors. HOWEVER to set the en... 37,802 - Unexpected error #I in name table search for element #X 37,803 - Too many unexpected errors in name table search - name table search terminating 37,804 - PATCH: Next bucket number has been set to #I 37,805 - Unable to find owning session page #I - Apparent corruption in session pages of owning extract 37,806 - Unable to find owning session page #I - Apparent looping in session pages of owning extract 37,807 - Unexpected internal error code #I in search of table #H - search terminated 37,808 - Owner compaction count (#I) does not match compaction count of owning extract (#I) ************************************************************************************** 39 - MONITOR ************************************************************************************** 39,2 - Action number out of range 39,3 - MDB not found 39,4 - DB not found 39,5 - TEAM not found 39,6 - Insufficient status to set this mode 39,7 - USER not found 39,8 - MODULE not found 39,9 - No INFO file at present for this system 39,10 - No WRITE access to CURRENT directory 39,11 - DB not current 39,12 - User number not found 39,13 - Resume file not found 39,14 - Insufficient status to run module 39,15 - No MDB has been specified 39,16 - DB is not part of this MDB 39,17 - DB already current 39,18 - Filing error-cannot delete macro file 39,19 - Cannot delete-macro not yet read 39,20 - Current position out of range 39,21 - There are already #I current DBS 39,22 - Actions turned off 39,23 - BATCH command ignored for interactive use 39,24 - DB name table full 39,25 - #N is not a valid MDB name. 39,26 - BATCH RETRIES and INTERVAL are now defunct - ignored 39,27 - No PDINFO file available 39,28 - Stamp #N not found 39,103 - ***Please run these DESIGN connection or Isometric system macros: 39,104 - MACRO 39,105 - From DB 39,106 - To DB 39,107 - .... and then delete them using the 'DELETE MACRO' command in MONITOR 39,108 - *** Unable to open Databases: 39,111 - In use by 39,114 - Filename 39,115 - unknown user 39,150 - Project: 39,151 - User: 39,152 - Teams: 39,153 - MDB: 39,154 - TYPE MODE 39,155 - N 39,156 - R 39,157 - RW 39,158 - Number 39,159 - Name 39,160 - Description 39,161 - Message 39,162 - Number ** unset ** 39,163 - Name ** unset ** 39,164 - Description ** unset ** 39,165 - Message ** unset ** 39,166 - Code 39,167 - Mbcharset 39,168 - Mbcharset ** unset ** 39,169 - Name: 39,170 - Host: 39,171 - Charset 39,172 - MDBStamp: ************************************************************************************** 41 - Barebone Constructor Library ************************************************************************************** 41,1 - System error - BARMES 41,2 - Not implemented. 41,3 - Last element was deleted. 41,4 - List has more than 50 members, program needs changing. 41,5 - Actions are inhibited, no effect. 41,6 - Non-existent element. 41,7 - Incorrect number or too many values for attribute, #I values required. 41,8 - Cannot create a #H at this level. 41,9 - Primitive may only own one hole. 41,10 - SYSTEM ERROR cannot find the WORLD. 41,12 - Name #N already used. 41,13 - Element not in current list. 41,14 - List is locked. 41,15 - This syntax is not valid in a Read-only module 41,16 - Object of illegal type. 41,17 - Owner of element being included is locked. 41,18 - Illegal end command. 41,19 - Wrong type of element. 41,21 - Illegal value. 41,24 - * not allowed in name. 41,25 - Current element has no name, * unchanged. 41,26 - Attribute not found. 41,27 - Newly constructed name too long, #N not changed. 41,28 - Undefined ID. 41,29 - Current element is locked. 41,30 - Trying to put an illegal attribute - #H. 41,31 - Cannot copy into an element which already has members. 41,34 - Cannot include element in current list. 41,35 - Element has no list part. 41,36 - Element with more than 200 attributes in FATSO. 41,37 - Element with reference array of length greater than 20 in FATSO. 41,38 - No members. 41,39 - Cannot copy members into a GROUP. 41,40 - Cannot copy members of current element. 41,41 - Cannot create an element off the end of a list. 41,42 - Element being included has no owner. 41,43 - Current element or an offspring of it is locked. 41,44 - Cannot access parent. 41,45 - Cannot delete element as its parent is locked. 41,46 - Cannot delete element as its owner is locked. 41,47 - Cannot delete GROUP members which have no owners. 41,48 - Cannot create an element in a GROUP. 41,49 - Too many values for program. 41,50 - Element being included is locked. 41,51 - Cannot delete element as it was accessed via a GROUP. 41,52 - Trying to put a reference of illegal type. 41,53 - Cannot change the name of the WORLD. 41,54 - Cannot change a read only database. 41,55 - No databases to work from. 41,56 - No default database. 41,57 - Cannot include from another database. 41,58 - Cannot include an element into a GROUP. 41,59 - Attribute of wrong type. 41,60 - Position in array must be in range 1 to 20. 41,61 - Variable number out of range. 41,62 - Replacement text for variable exceeds #I characters. 41,63 - Illegal reference. 41,64 - Incorrect type of element. 41,65 - Element may not be accessed in this way. 41,66 - List exhausted. 41,67 - Current element has no owner. 41,68 - Cannot access element from this level. 41,69 - Undefined name #N 41,70 - Element #F does not exist. 41,71 - - Line aborted. 41,72 - - Line aborted. Actions inhibited. 41,73 - CALCULATOR error. 41,74 - Only five "OF" constructions allowed. 41,75 - This syntax is restricted. 41,76 - Absolute value of INTEGER truncated to 32767. 41,77 - Cannot unname the WORLD. 41,78 - DABACON error number #I. 41,79 - Number of characters in text string exceeds maximum of #I. 41,80 - Cannot delete the WORLD. 41,81 - Units table full. 41,82 - Units table is empty. 41,83 - WARNING - Problem with UREF of MTYPE #F. 41,84 - DFUNI incorrectly set. 41,85 - Name must refer to an MSET element. 41,86 - User definable units not available 41,87 - Units element does not exist. 41,88 - Cannot get to units element. 41,89 - Only PDMS units are available 41,90 - Error in units initialisation. 41,91 - Cannot find unit. 41,92 - Precision value #I out of range. 41,93 - Invalid for FINCH units. 41,94 - Valid only for FINCH units. 41,95 - Name too long, truncated to #I characters. 41,96 - Error in name - * unchanged. 41,97 - MSET #F has duplicate definition for ATNA #H 41,98 - The result of the expression is either too big or small. 41,99 - Warning: Deleted element removed from locked GROUP #F 41,100 - All types 41,101 - TYPE 41,102 - NAME 41,103 - LOCK 41,104 - BORES 41,105 - DISTANCES 41,106 - FALSE 41,107 - TRUE 41,108 - Elapsed time = #R seconds 41,109 - CPU time = #R seconds 41,110 - Disc I/O = #R 41,111 - seconds. 41,120 - MULT = 41,121 - ADEN = 41,122 - ABREV = 41,123 - UVALUE out of range on this machine. 41,124 - #F is not a design element 41,125 - Attempt to disconnect BRAN #F from NOZZ #F failed 41,126 - NOZZ #F contained an illegal CREF to #F 41,127 - Actions are ON 41,128 - Actions are FIXED ON 41,129 - Actions are OFF 41,130 - Actions turned off 41,132 - Macro suspended. Use $M+ to continue, or $MK to abort. 41,133 - This command is restricted 41,134 - CALCULATOR error - Missing spaces around operator in algebraic expression OR invalid reverse polish expression 41,135 - CALCULATOR error - Numeric stack overflow - use less complicated expression 41,136 - CALCULATOR error - Incorrect data type for requested operation 41,137 - CALCULATOR error - Attempted zero divide 41,138 - CALCULATOR error - Unable to convert string #N to a number 41,139 - CALCULATOR error - Text stack overflow - use less complicated expression 41,140 - CALCULATOR error - STRING function precision must be in range D0 to D6 41,141 - CALCULATOR error - Text string result generated where numeric result required 41,142 - WARNING - ACTIONS FORCE ON is obsolete with the introduction of PML 41,143 - WARNING - ACTIONS FIXED ON is now interpreted as PML's ONERROR CONTINUE 41,144 - WARNING - ACTIONS PAUSE ON is now interpreted as PML's ONERROR PAUSE 41,145 - WARNING - ACTIONS PAUSE OFF is now interpreted as PML's ONERROR RETURN 41,146 - #I unused pages left in Dabacon buffer 41,147 - CALCULATOR error - Invalid specification of TRIM character 41,148 - CALCULATOR error - Invalid specification of TRIM options 41,149 - WARNING - Data too long for variable. Data truncated 41,150 - The hour specified must be less than 24 41,151 - The minutes specified must be less than 60 41,152 - The year specified (#I) must be between 1996 and #I 41,153 - ERROR - Grid reference must be in the range 0-9 41,154 - ERROR - NWELDS must be in the range 0-20 41,155 - The days specified must not be more than #I 41,156 - The months specified must not be more than 12 41,200 - Unable to DELETE #F - cannot remove its local name entry from #F 41,201 - Unable to INCLUDE #F - cannot remove its local name entry from #F 41,202 - Unable to DELETE #F - dabacon error #I 41,205 - Cannot include #F - unable to create nested template 41,206 - Cannot include #F - it is already in parent tree structure 41,207 - This template is a descendant of a template - recursion not allowed 41,208 - Unable to create any more elements under #F - dabacon limits reached 41,209 - #Hs cannot be nested by more than #I levels 41,210 - Attribute #H may only refer to a dataset in the dataset area 41,211 - Templates may only be included from one template area into another 41,212 - Attribute #H may only refer to a template in the template area 41,213 - A nested template may not be created as a descendant of a #H 41,214 - This #H already contains a template 41,215 - Cannot create a #H as an offspring of a #H in this module. 41,216 - Cannot delete members of the WORLD 41,217 - Cannot make a #H a copy of a #H. 41,218 - Cannot have a #H owned by a #H. 41,219 - Cannot find last element. 41,220 - Only templates can be UNTIEd 41,221 - #H attribute does not reference an existing element. 41,222 - Cannot access a #H from this level. 41,223 - #F is not in the same database as #F 41,224 - #F cannot be included as it is already in the current element's list. 41,225 - #F is locked. 41,226 - #F cannot be included as its owner is locked. 41,227 - #F is not in the current element's list. 41,228 - #F cannot be removed from its owner's list. 41,229 - #F is not a #H. 41,230 - Cannot delete as the current element or one of its offspring is locked. 41,231 - #F is not in the current element's list. 41,232 - Current element does not have an attribute #H. 41,233 - No more than twenty values allowed. 41,234 - #R is not an INTEGER. 41,235 - Cannot set "*" to a name with a "*" in it. 41,236 - Real value outside the range for Integer to Real conversion, INT/NINT function not performed. 41,237 - Given element and current element are the same 41,238 - Cannot set attribute to this value 41,239 - Creating primitives below #H not yet available. 41,240 - #N attribute does not reference an existing element. 41,241 - SSPEC is no longer a valid attribute for RESTRAINT elements 41,242 - Users are not allowed to move to #H elements 41,243 - Your current element has been deleted by another user - moving you back to the WORLD 41,244 - Another use has deleted some elements you were trying to read - please use the SAVEWORK command to update your view 41,245 - This attribute can only take values between -1 and 7 41,246 - Autosaving db #I - #N 41,247 - Autosave db #I - #N? 41,248 - Significant element #F must be CLAIMed before database can be updated 41,250 - Cannot delete element - unclaimed offspring #F found 41,251 - Unexpected error checking for unclaimed significant items 41,252 - Significant element #F must be CLAIMed before element can be deleted 41,260 - Value of ppoint visibility filter PVIF must be in range 0 - 3 41,261 - Invalid PPoint/DPoint number - negative values are not permitted 41,301 - Insufficient access rights for attribute :#N 41,302 - Attribute :#N not valid for current element 41,303 - Too many values specified for attribute :#N - it has been truncated 41,304 - Invalid value 41,305 - Wrong attribute type 41,306 - Off end of current list of values 41,307 - Element is locked 41,308 - A reference may not be made to an element of this type. 41,309 - Database not open on write access 41,310 - #N = 41,311 - DO loop variable #N cannot be modified in mid loop 41,312 - Variable #N not defined 41,313 - ERROR - #N already exists as a simple (non-array) variable 41,314 - ERROR - #N already exists as an array variable 41,315 - #N[#I] = 41,316 - Array element #N[#I] not defined 41,317 - #N is an empty array 41,318 - DO loop array variable #N cannot be deleted in mid loop 41,319 - ERROR - Cannot access file #N - #H 41,320 - ERROR - No write access to file #N 41,321 - ERROR - No read access to file #N 41,322 - ERROR - File #N already in use 41,323 - ERROR - Could not find file #N 41,324 - ERROR - File #N already exists ( use OVERWRITE option ) 41,325 - ERROR - End of file found - #N 41,326 - ERROR - Unable to close file #N 41,327 - ERROR - File token #I is invalid 41,328 - Sort: 41,329 - File: 41,330 - Mode: 41,331 - Token: 41,332 - OVERWRITE 41,333 - WRITE 41,334 - APPEND 41,335 - READ 41,336 - ERROR - #N[#I] is an array element name, where an array name is required 41,337 - ERROR - Bad sort type when trying to sort #N 41,338 - Fullname: 41,339 - Size (bytes): 41,340 - Not a multi-byte project, input ignored. 41,341 - Multi-byte characters are not allowed for the SKEY 41,342 - Date/time modified: 41,343 - Owner: 41,344 - Login name: 41,345 - Host name: 41,346 - Environment variable 41,347 - Unique: 41,348 - Entryname: 41,349 - Lock: 41,350 - LOCKED 41,351 - Header and footer are longer than page - #N 41,352 - Header/footer expression will not evaluate - #N 41,353 - Unable to set page count PML variable - #N 41,354 - Cannot add headers/footers to an unpaged file - #N 41,355 - End of scan 41,356 - Dabacon error #I on setting attribute #H 41,357 - Value being assigned or variable being assigned to is not of type STRING 41,358 - Negative array indices are not permitted. 41,359 - Warning #I dabacon stacks outstanding at end of line - Expected none 41,362 - Element #F kerror #I 41,366 - Cannot read into a variable in graphics mode 41,367 - Cannot read into a variable in batch mode 41,368 - User is not allowed to create elements of type #H. 41,369 - User is not allowed to delete elements of type #H. 41,370 - User is not allowed to include or reorder elements of type #H. 41,371 - Pathname: 41,372 - User is not allowed to set attributes of type #H. 41,376 - Internal Error - DB_Element #F outstanding 41,377 - Element #F may not be reordered before #F. 41,378 - Element #F may not be reordered after #F. 41,379 - Element #F may not be modified 41,380 - Error - REFGRID not set" 41,381 - Error - invalid axes, use X,Y or Z 41,382 - Error - No grid plane located 41,383 - Error - Grid plane and system incorrectly defined ************************************************************************************** 42 - PPOINT AND DESIGN CONSTRUCTOR LIBRARIES ************************************************************************************** 42,1 - Point set in catalogue does not exist 42,2 - SYSTEM ERROR-SPREF attribute not found 42,3 - P-Point in catalogue does not exist 42,4 - GMSET in catalogue does not exist 42,5 - SYSTEM ERROR - more than 30 parameters in catalogue component. 42,6 - For #F, catalogue component #F does not exist 42,7 - SYSTEM ERROR - you are not in a P-Point 42,8 - SYSTEM ERROR - corrupted axis found by GAXIS 42,10 - Catalogue error - parameter not found 42,11 - Catalogue error - DDRADIUS used for component without RADIUS 42,12 - Catalogue error - DDANGLE used for component without ANGLE 42,13 - SYSTEM ERROR- refno given to P-Point routine not SPCOM 42,14 - Error for #F - SPCOM #F does not exist 42,15 - Catalogue error- DDHEIGHT used for comp without HEIGHT 42,16 - Catalogue error for component #F , catalogue primitive #F - parameter number ( #I ) out of range 42,17 - Catalogue error for component #F , catalogue primitive #F - Owning Design parameter number ( #I ) out of range 42,18 - Catalogue error for component #F , catalogue primitive #F - Owning catalog parameter number ( #I ) out of range 42,19 - Catalogue error for component #F , catalogue primitive #F - Attached Design parameter number ( #I ) out of range 42,20 - Catalogue error for component #F , catalogue primitive #F - Attached catalogue parameter number( #I ) out of range 42,21 - Catalogue error for component #F , catalogue primitive #F - Catalogue parameter number ( #I ) out of range 42,22 - Catalogue error for component #F , catalogue primitive #F - Design parameter number ( #I ) out of range 42,23 - Dataset evaluation failed - too many data records (>100) for #F, catalogue component #F 42,24 - Warning - more than 1 data record found with same key for #F, catalogue component #F 42,25 - Catalogue error for component #F , catalogue primitive #F - unable to evaluate #H #H 42,26 - Catalogue error for component #F , catalogue primitive #F - unable to evaluate catalogue expression for attribute #H 42,29 - Recursion limit reached in calculating ppoint #I on #F. Please check for recursive ppoint definitions 42,30 - #F does not have Design Point #I 42,31 - No limit point found in element ID 42,32 - Plane normal direction undefined 42,33 - Polar direction undefined 42,34 - Polar position undefined 42,35 - Polar direction lies in plane 42,36 - Angles must be in range -180 to +180 42,37 - No default direction 42,38 - Illegal angle specification 42,39 - Element has no ARRIVE and LEAVE P-Points 42,40 - Element has no P-HEAD / P-TAIL 42,41 - Direction letter used twice 42,42 - File cannot be opened. Error number #I 42,43 - Illegal device width 42,44 - Illegal page size 42,45 - You are not in a piping component 42,46 - SYSTEM ERROR - unable to extract SPEC 42,47 - Current element is not BRANCH ( or HANGER ) 42,48 - ID not of type SPCOM 42,49 - Name too long 42,50 - Unknown name 42,51 - Too many questions 42,52 - SPEC does not exist 42,53 - Warning - question #H left unanswered 42,54 - Warning - question #H#I left unanswered 42,55 - No answers provided for question #H 42,56 - #F does not have P-Points 42,57 - Illegal P-Point number for #F 42,58 - Illegal equipment P-Points for #F 42,59 - Illegal P-Point number for equipment component #F 42,60 - Polyhedron #F does not have P-Points 42,61 - Compatibility table does not exist 42,62 - Compatibility table overflow 42,63 - Empty compatibility table 42,64 - #H not selected 42,65 - Question #H ( Answer #R ) cannot be answered 42,66 - Question #H#I ( Answer #R ) cannot be answered 42,67 - Question #H ( Answer #H ) cannot be answered 42,68 - Question #H#I ( Answer #H ) cannot be answered 42,69 - Current element is not a HANGER component 42,70 - Current element does not own any NOZZLES 42,71 - Reconnecting NOZZLE #N ( #F ) 42,72 - Cannot reconnect BRANCH #F 42,73 - BRANCH #F is not connected back to NOZZLE 42,74 - NOZZLE is unconnected 42,75 - CREF #F is not a BRANCH 42,76 - BRANCH #N ( #F ) is in a read-only database - not reconnected 42,77 - Multiple database not selected or has no current databases 42,78 - ACTIONS are OFF - Database not updated 42,79 - Item is unsuitable for AUTO or LIMIT, or spatial map is out of date 42,80 - Cannot create inter db macro - Connections will be lost 42,81 - Inter db macro file #N created 42,82 - Cannot create inter db macro #N 42,86 - The system database has not been updated so you will have to inform 42,87 - a member of the other team where the macro resides 42,88 - Angles for TORI must be in the range 0 to 180 42,89 - Inter db macro to update 42,90 - with connections from 42,91 - Warning - Angle is greater than maximum specified in SPREF 42,92 - Warning - Angle is less than minimum specified in SPREF 42,93 - No answers provided for question #H#I 42,94 - P-Point no. #I in catalogue does not exist 42,95 - An inter db connection has been made with a foreign db from 42,96 - project #N. To satisfy the references, enter the other project 42,97 - and in ADMIN include your current design db in a suitable MDB 42,98 - and then in DESIGN run the inter db macro. 42,99 - Maximum number of inter db macros is #I 42,100 - No graphics device set 42,103 - Illegal option for this device 42,115 - Current graphics output device is 42,127 - with OVERWRITE 42,129 - Only FILE or TTY devices may be selected in BATCH PDMS 42,132 - with APPEND 42,134 - Currently available devices are: 42,164 - with width #I 42,165 - Current alpha output device is 42,166 - Terminal 42,167 - File #N 42,168 - with #I characters 42,169 - with #I lines 42,198 - Unset 42,211 - TTY $( no graphics output $) 42,245 - Workstation Graphics 42,501 - Question #H ( Answer #N ) cannot be answered 42,502 - Question #H#I ( Answer #N ) cannot be answered 42,503 - Environment variable #N not defined for P+ID directory ************************************************************************************** 43 - MDB LIBRARY AND ADMIN LIBRARY ************************************************************************************** 43,1 - Project #N not found! 43,2 - Module not found! 43,3 - Project does not contain this module! 43,4 - Variable #I not defined 43,5 - Overflow in expanded line 43,6 - Non-alphabetic character in project name 43,7 - Error #I opening #N on unit #I with mode #I 43,8 - Insufficient status to run module 43,9 - Environment Variable not defined for project name. 43,10 - $V #I= 43,11 - Unknown error 43,12 - Action number out of range 43,13 - #H not found 43,14 - No set TEAM 43,15 - USER ID not found 43,16 - USER not found 43,17 - MODULE not found 43,18 - Insufficient status to run module 43,19 - Error opening database to get size 43,20 - You have been deleted!You are now leaving PDMS 43,21 - Database has reached maximum allowable size.It must be Reconfigured and may be Split into two. 43,22 - User no longer defined in System Database 43,23 - Module incorrectly defined in ADMIN 43,24 - Module executable #N does not exist 43,25 - attempting to open db 43,26 - DB number #I is out of range 43,27 - No mark to UNDO to 43,28 - No UNDO to REDO to, or modification made since UNDO 43,29 - Unable to set MARK. Dabacon error #I 43,30 - Unable to clear MARK. Dabacon error #I 43,31 - No Undo mark to CLEAR 43,32 - No Vantage Marine license for #N 43,34 - Too many characters ( 14 maximum ) --- Line aborted 43,35 - Error in BATCH - ACTIONS turned off - syntax checking onlyACTIONS ON command disabled 43,36 - Error in macro - ACTIONS turned off - syntax checking onlyACTIONS ON command will turn actions back on 43,37 - ACTIONS are OFF - Database not updated 43,38 - Actions turned off 43,39 - 43,40 - Unable to open #N for Read/Write, retrying in Read only mode 43,41 - Unable to open DB #N, #N 43,42 - Unable to open all requested Default databases 43,43 - MDB status is invalid; staying in MDB mode 43,44 - #F is not a valid DB database element 43,45 - Unable to open DB #N, dabacon error #I 43,46 - Incorrect mode - Mode must be 1 or 3 43,47 - Database #N is not open 43,48 - Database file for #N is not open 43,49 - Database #N is not open on write 43,50 - Session number #I is not valid for Database #N 43,51 - Unable to release claimed elements for DB #N, dabacon error #I 43,53 - Description Start End Length 43,55 - Only the COMMs DB may be opened in SHARE mode 43,56 - Unable to create DB #N, dabacon error #I 43,57 - Unable to close DB #N properly, dabacon error #I. DB changes may have been lost 43,58 - Unable to open template database for project 43,59 - Unable to open system DB for project #N. Is your environment variable set correctly? 43,60 - Cannot open db, DB #N has the same dbnumber ( #I ) and is already open 43,61 - Database corresponding to token #I is not open 43,62 - Database number #I is not open 43,63 - Unable to open template database; template found is too old 43,64 - Stamp #N not found 43,65 - There are no #N DBs in the current MDB 43,66 - Outstanding search tokens in closed database #N 43,100 - SYSTEM 43,101 - DESIGN 43,102 - CATALOGUE 43,103 - DRAWING 43,104 - DDL MK 43,105 - ************* MESSAGES ************* 43,110 - Extract ID #I 43,111 - Copy flag #I 43,112 - Multi user flag #I 43,113 - Owning extract ID #I 43,114 - Potentially inconsistent flag #I 43,115 - Template type #H 43,116 - Template version #I 43,117 - Number of owned extracts #I 43,118 - Last saved session number #I 43,119 - List of #I owned extract ids: 43,133 - #I user(s) listed 43,150 - PROJECT #N============= 43,151 - User 43,152 - Module 43,153 - MDB 43,154 - **UNSET** 43,155 - DB MODE 43,156 - N 43,157 - R 43,158 - RW 43,159 - (Restricted) 43,160 - (General) 43,161 - (Free) 43,162 - Teams : 43,163 - Size 43,164 - pages 43,165 - Number 43,166 - Filename 43,167 - MDBS: 43,169 - **NONE** 43,170 - Current DBS: 43,171 - Deferred DBS: 43,173 - USERS: 43,175 - DBS: 43,176 - Database 43,177 - has copies: 43,178 - Date 43,179 - Time 43,180 - Unable to open databases. BATCH run terminated. 43,181 - PDMS is unable to access one or more of the databases in the current MDB. 43,182 - This may be due to database corruption 43,185 - Name 43,186 - Host 43,187 - Mbytes 43,188 - Gbytes 43,189 - Total size of project 43,190 - Entered 43,191 - Number of Active Users is 43,192 - Working Extracts/Variants: 43,251 - Command Invalid: Project not set. 43,252 - Error opening System Database. It may be a PDMS10 project. 43,253 - Error opening System Database. 43,254 - Error opening Comms Database. 43,255 - Error opening Misc Database. 43,256 - DDL Error: the project is the wrong version. 43,258 - Invalid Username or Password 43,259 - Command Invalid: Username not set. 43,260 - Macro Environment Variable #N not defined for project. 43,291 - Licence exists 43,292 - Licence does NOT exist 43,360 - Unable to SAVEWORK for DB #N 43,361 - Element #F has been deleted by another User. Please move any created elements from below this to some... 43,362 - Element #F kerror #I 43,363 - Unable to GETWORK for DB #N 43,364 - name clash on #F. Please rename 43,365 - Dabacon error #I for DB #N 43,366 - Cannot read into a variable in graphics mode 43,367 - Cannot read into a variable in batch mode 43,368 - User is not allowed to create elements of type #H. 43,369 - User is not allowed to delete elements of type #H. 43,370 - User is not allowed to include or reorder elements of type #H. 43,371 - Pathname: 43,372 - User is not allowed to set attributes of type #H. 43,373 - Unable to savework. Perhaps you have been expunged? Please quit. Before quitting you can use the "ALPH... 43,374 - Dabacon error #I in quit 43,375 - Internal Error - Unable to close DB #I as DB_Element objects outstanding 43,376 - Internal Error - DB_Element #F outstanding 43,377 - Cannot flush/abandon #F as old and new owners must both be in the list, or neither in the list 43,378 - Cannot flush/abandon #F without it's owner 43,379 - Cannot flush/abandon #F without it's members 43,380 - Cannot abandon/release #F. Element is claimed out by #N 43,381 - Unable to do a DROP for DB #N 43,382 - DB #N is not a multiwrite DB open in write- Error in flush or refresh or abandon 43,383 - DB #N is not an Extract DB - Error in flush or refresh or abandon 43,384 - Unable to REFRESH for DB #N 43,385 - Unable to do an EXTRACT RELEASE for DB #N 43,386 - Unable to FLUSH changes for DB #N 43,387 - Updates outstanding for DB #N- Please do a SAVEWORK and try again 43,388 - Extract number #I is invalid for DB #N 43,389 - Extract #F is not above extract #F in the extract hierarchy 43,390 - Unable to do an EXTRACT CLAIM for DB #N 43,391 - There is no FREE User for this system DB 43,392 - Element #F must be released before an extract release is possible 43,393 - Element #F is modified and cannot be released. Please do a "Savework" and then release 43,394 - Cannot open DB, as different extract with the same DB number is already open 43,395 - DB is not an extract 43,396 - Internal error -Cannot open an empty file for an extract- extract #N 43,397 - Cannot update compact number for db #N - dabacon error #I 43,398 - Db #N must be in filewrite mode to update compact number 43,399 - Reconfigurer error on setting Dabacon buckets for DB #N. Please run DICE to check the database integrity 43,400 - Could not write to page 1 of DB #N, dabacon error #I 43,401 - Element #F is not a primary element 43,402 - Element #F is not claimed 43,403 - User or Extract claims outstanding for #F- Please release claims first 43,404 - Element reference #F is invalid or has been deleted 43,405 - Element number #I is not open 43,406 - Internal error - invalid hash code 43,407 - Normal Flush is not valid for #N as parent extract is not primary at this location 43,408 - #N is not an extract DB 43,409 - Cannot open DB, as different DB with the same DB number is already open in write 43,410 - Cannot flush or drop element #F because no changes have been made 43,411 - #N is a variant DB, and hence cannot be claimed to 43,412 - #N is a variant DB, and hence cannot be released or issued from 43,413 - Dabacon error #I getting header information #H for DB #N 43,414 - Dabacon error #I updating extract list for extract number #I for DB #N 43,415 - Dabacon error #I setting header information #H for DB #N 43,416 - Cannot create a new Master or Extract as DB #N is already open with the same number. Try unsetting the MDB 43,417 - DB #N cannot be opened in write whilst DB #N is opened in write 43,418 - Unable to switch the DB to write access 43,419 - An invalid element has been specified 43,420 - Unable to open database schema for #N DBs - Dabacon error #I 43,421 - Cannot open database schema file #N. Filing error " #N " occurred 43,422 - Cannot close database schema file #N. Filing error " #N " occurred 43,423 - Unable to close database schema for #N DBs - Dabacon error #I 43,424 - Invalid schema version number #I for #N databases. Required version number is #I 43,425 - #F is not primary at this location 43,426 - #F is a foreign database 43,427 - Unable to flush/refresh DB #N because sessions have not been propagated to a higher extract 43,428 - Unable to open DB #N because sessions have not been propagated to a higher extract 43,429 - Unable to open DB #N because extract hierarchy is invalid. In a Global project, extract owner(s) need to be sy... 43,430 - Previous flush for DB #N could not be found. Flush may have overtaken another flush. Please wait for flushes to complete 43,431 - Previous flush for DB #N failed. Please wait and try again. If problem persists, please contact your system ad... 43,432 - Element #F is not claimed to the extract 43,433 - Element #F is modified in the extract and cannot be extract released. Please flush the changes and then do a release 43,601 - Database #N does not have a comparison date set 43,602 - Extract #N does not have the same DB number as DB #N 43,603 - A date must be given if setting the comparison date for the whole MDB 43,604 - Database error #I 43,605 - Current element #F is not valid at the comparison session ************************************************************************************** 44 - FILE HANDLING ERRORS ************************************************************************************** 44,1 - Filename missing 44,2 - Unit number #I is illegal 44,3 - Unit 0 is invalid 44,4 - Mode #I is illegal 44,5 - Rewind not possible on unit #I 44,6 - #N is not a valid filename 44,7 - File #N does not exist 44,9 - File #N in use 44,11 - Disk full 44,12 - File #N open on delete 44,13 - Unit #I in use 44,14 - Type #I is invalid 44,15 - File #N already exists 44,16 - Disk space allocation exhausted 44,17 - Security violation 44,18 - Attempt to extend file beyond maximum size 44,19 - Attempt to rewind direct access file 44,20 - File not open on correct unit 44,21 - Trying to append to direct access file 44,22 - File #N is not allocated 44,23 - Copying error 44,24 - File locked in different mode 44,25 - File name too long 44,26 - End of file on unit #I 44,27 - Beginning of file on unit #I 44,28 - Unit #I not open 44,29 - Unable to delete file 44,30 - Unable to open file #N 44,31 - FECS Dictionary has not been specified 44,32 - FECS Dictionary #N Does not exist 44,33 - #N 44,34 - Directory not found for file #N 44,35 - **** Flayer Machine Dependent error ****#N 44,36 - Privileges not sufficient for file #N 44,101 - Cannot attach to UFD 44,102 - Not a UFD 44,103 - Disk I/O error 44,104 - Maximum quota exceeded 44,105 - Unable to access UFD - Check ACL 44,108 - UFD does not exist 44,110 - UFD is full ************************************************************************************** 45 - STRESS LIBRARY ************************************************************************************** 45,1 - Element is not a PIPE 45,2 - Element is not a BRANCH 45,3 - Element is not a PIPING COMPONENT 45,4 - Elements are not in the same BRANCH 45,5 - No databases to work from 45,6 - No default database 45,7 - Trying to alter read-only database 45,8 - Can only mark BRANCHES 45,9 - #F already marked 45,10 - #F already unmarked 45,11 - Incorrect type 45,12 - Too many segments 45,13 - Components incorrectly aligned after #F 45,14 - Repetition of data points in #F 45,15 - Not enough data points in #F ASSUMING PROPERTY CONSTANT 45,16 - Required PRESSURE (#R) out of range in #F 45,17 - Required TEMPERATURE (#R) out of range in #F 45,18 - No data points in #F ASSUMING PROPERTY CONSTANT 45,19 - #F has no EXPANSION table 45,20 - #F has no YOUNGS MODULUS table 45,21 - Cannot get FLUID DENSITY for #F ASSUMING ZERO DENSITY. 45,22 - No COMPONENT DATA for #F 45,23 - #F with LEND TRUE in middleof network - IGNORED 45,24 - No SOLID for #F ASSUMING SAME AS LAST BRANCH 45,25 - ERROR - No SOLID for #F 45,26 - Maximum is #R : Minimum is #R 45,27 - Max no. of applications exceeded (more than #I ) 45,28 - #F has no STRESS table 45,29 - Error Not a valid PSA5 Design Code 45,30 - The min temperature value of #R will be used for interpolation 45,31 - The max temperature value of #R will be used for interpolation 45,32 - The min pressure value of #R will be used for interpolation 45,33 - The max pressure value of #R will be used for interpolation 45,34 - Invalid design CODE card, minimal output produced ************************************************************************************** 46 - Messages for Programmable Macro Language (PML) ************************************************************************************** 46,1 - PML: Programming constructs are only allowed in macros 46,2 - PML: Too many nested blocks/macros (more than #I) 46,3 - PML: ELSEIF (line #I) found inside ELSE block (line #I) 46,4 - PML: ELSEIF (line #I) found inside DO block (line #I) 46,5 - PML: ELSEIF (line #I) has no matching IF 46,6 - PML: ELSE (line #I) found inside ELSE block (line #I) 46,7 - PML: ELSE (line #I) found inside DO block (line #I) 46,8 - PML: ELSE (line #I) has no matching IF 46,9 - PML: ENDIF (line #I) found inside DO block (line #I) 46,10 - PML: ENDIF (line #I) has no matching IF 46,11 - PML: Too many nested macros (more than #I) 46,12 - PML: File position enquiry failed 46,13 - PML: ENDDO (line #I) found inside IF or ELSEIF block (line #I) 46,14 - PML: ENDDO (line #I) found inside ELSE block (line #I) 46,15 - PML: ENDDO (line #I) has no matching DO 46,16 - PML: File position setting failed 46,17 - PML: BREAK or SKIP must occur in a DO loop 46,18 - PML: Label #N multiply defined 46,19 - PML: Too many labels (more than #I) 46,20 - PML: GOLABEL #N illegally jumps into a block 46,21 - PML: Label table corrupt 46,22 - PML: Label #N exceeds 16 characters 46,23 - PML: Label #N not found 46,24 - PML: Macro close when not open 46,25 - PML: Macro close does not match open 46,26 - PML: Could not initialise DO variable #N 46,27 - PML: (Warning) Unclosed blocks in macro file 46,28 - ERROR - Variable #N not defined 46,29 - ERROR - Variable name #N too long. Max #I chars following !(s) 46,30 - PML: ELSEHANDLE (line #I) has no matching HANDLE 46,31 - PML: ENDHANDLE (line #I) has no matching HANDLE 46,32 - At line #I of macro #N 46,33 - Called from line #I of macro #N 46,34 - PML: DO LIST - form not found 46,35 - PML: DO LIST - gadget not found 46,36 - PML: DO LIST - invalid value length 46,37 - PML: DO LIST - field not found 46,38 - PML: DO LIST - wrong sort of gadget 46,39 - PML: DO variable #N is already in use 46,40 - ERROR - Invalid variable name - #N 46,41 - ERROR - Invalid array index 46,42 - PML: DO loop control variable is not a simple variable 46,43 - PML: Variable #N cannot be re-used here as it is not a simple variable 46,44 - PML: Variable #N is not an array variable 46,45 - PML: Array element not allowed after DO ... OVER/IN 46,46 - PML: Value too large 46,47 - PML: ELSEIF (line #I) found inside HANDLE block (line #I) 46,48 - PML: ELSE (line #I) found inside HANDLE block (line #I) 46,49 - PML: ENDIF (line #I) found inside HANDLE block (line #I) 46,50 - PML: ENDDO (line #I) found inside HANDLE block (line #I) 46,51 - PML: ELSEHANDLE (line #I) found inside DO block (line #I) 46,52 - PML: ELSEHANDLE (line #I) found inside IF or ELSEIF block (line #I) 46,53 - PML: ELSEHANDLE (line #I) found inside ELSE block (line #I) 46,54 - PML: ENDHANDLE (line #I) found inside DO block (line #I) 46,55 - PML: ENDHANDLE (line #I) found inside IF or ELSEIF block (line #I) 46,56 - PML: ENDHANDLE (line #I) found inside ELSE block (line #I) 46,57 - PML: Cannot execute monitor at this point (inside an atom, comment etc) 46,58 - PML: Method #N could not be found 46,59 - ERROR - Variable name must begin with letter 46,60 - ERROR - Form/gadget name must begin with letter 46,61 - ERROR - Form/gadget name #N too long. Max #I chars following _ 46,62 - ERROR - Member name must begin with letter 46,63 - ERROR - Member name #N too long. Max #I chars following . 46,64 - ERROR - Closing delimiter (>) used without open delimiter (<). 46,65 - ERROR - Invalid name. 46,66 - ERROR - #N is not a valid character in a name. 46,67 - ERROR - Closing delimiter (>) missing from name. 46,68 - PML: Argument type mismatch 46,69 - PML: Function called with not enough arguments 46,70 - PML: Function called with too many arguments 46,71 - PML: Invalid argument type 46,72 - PML: No function call being executed 46,73 - PML: Variable value not set 46,74 - PML: Nested object definitions 46,75 - PML: Object definition exists 46,76 - PML: Variable is not deletable 46,77 - PML: Array index out of range 46,78 - PML: Object member exists 46,79 - PML: Invalid array expression 46,80 - PML: Invalid syntax in the current context 46,81 - PML: Variable cannot be member of compound variable 46,82 - PML: Array index exceeds limit 46,83 - PML: Negative array indices are not supported 46,84 - PML: Variable type mismatch 46,85 - PML: Wrong Function found - definition for !!#N expected. 46,86 - PML: Argument #N has been used more than once. 46,87 - PML: Object definition for #N could not be found. 46,88 - PML: Number of buffers out of range: 0 to #I are acceptable values. 46,89 - PML: Cannot module switch while a PML function is executing. 46,90 - PML: Cannot SAVE/RESTORE while a PML function is executing. 46,91 - PML: Cannot redefine types while a PML function is executing. 46,92 - PML: Type #N is not redefinable. 46,93 - PML: No object definition in progress. 46,94 - PML: Unknown variable type #N. 46,95 - PML: Duplicate label definition 46,96 - PML: Invalid token 46,97 - PML: DO (line #I) has no matching ENDDO 46,98 - PML: IF (line #I) has no matching ENDIF 46,99 - PML: HANDLE (line #I) has no matching ENDHANDLE 46,100 - PML: Loop variable error #I 46,101 - PML: Invalid argument type : #H Expected ************************************************************************************** 47 - Command Processor ************************************************************************************** 47,2 - CP: Word is too long 47,3 - CP: No digit after decimal point in number 47,4 - CP: No digit after / in number 47,5 - CP: Denominator zero in number 47,6 - CP: Name too long 47,7 - CP: Name too long when star is expanded 47,8 - CP: No digit after / in REFNO 47,9 - CP: Illegal character in text 47,10 - CP: Text is too long 47,11 - CP: Illegal ESC-T command 47,12 - CP: Only allowed in macros 47,13 - CP: Line too long when macro argument is expanded 47,14 - CP: Overflow error 47,15 - CP: Syntax error 47,16 - CP: Command line too long 47,17 - CP: Line too long after synonym expansion 47,18 - CP: Synonym expansion is recursive 47,19 - CP: Command line too long/Too many actions 47,20 - CP: Illegal ESC-Q command 47,21 - CP: Synonym is too long 47,22 - CP: Too many synonym arguments 47,23 - CP: Illegal ESC-S command 47,24 - CP: Synonym table full 47,25 - CP: Synonym does not exist 47,26 - CP: No synonyms defined 47,27 - CP: Macro arguments are too long 47,28 - CP: Too many macro arguments 47,29 - CP: No valid filename after ESC-M 47,31 - CP: Missing ESC-. terminator in $M command 47,32 - CP: Missing ESC-> terminator in macro argument 47,33 - CP: Illegal macro format 47,34 - CP: Too many nested macros 47,35 - CP: Illegal character in ESC-D command 47,36 - CP: Macro argument index >9 in ESC-D command 47,37 - CP: Macro argument too long in ESC-D command 47,41 - CP: Too many digits in number 47,42 - CP: Too many levels in ESC-R command 47,43 - CP: Illegal status value in ESC-R command 47,44 - CP: No more recording units available 47,45 - CP: Recording stack overflow 47,46 - CP: Illegal ESC-R command 47,47 - CP: Missing ESC-. in macro 47,48 - CP: No macros in progress 47,49 - CP: No recording defined 47,50 - CP: Meaningless symbol(s) in command line 47,51 - CP: Illegal ESC-H command 47,52 - CP: ESC-G variable name too long 47,53 - CP: Illegal ESC-G command 47,54 - CP: No args allowed in ESC-G command 47,55 - CP: Illegal ESC-G variable name 47,56 - CP: Illegal ESC-W command 47,57 - CP: No GVARS defined 47,58 - CP: Command line aborted 47,59 - CP: No filename given in ESC-R command 47,60 - CP: Invalid ESC-H option number 47,61 - CP: Force buffer overflow 47,62 - CP: Incomplete command line 47,63 - CP: Illegal ESC-U command 47,64 - CP: Illegal ESC-O command 47,65 - CP: End-of-file whilst inside a $(...$) comment [recovered] 47,66 - CP: End-of-file encountered (probably an unmatched text quote) ************************************************************************************** 61 - INTREPID and DESIGN Messages ************************************************************************************** 61,1 - Unable to calculate the orientation 61,2 - #F is not a piping or a hanger component or has not been positioned oriented or selected. 61,3 - #F is not a branch or piping component 61,4 - #F is not a hanger or hanger component 61,5 - Unable to position #F 61,6 - #F does not have a position 61,7 - Unable to orientate #F 61,8 - #F does not have an orientation 61,9 - Unable to set the head position of #F 61,10 - Unable to set the tail position of #F 61,11 - Unable to set the head direction of #F 61,12 - Unable to set the tail direction of #F 61,13 - Trying to connect #F to itself 61,14 - Unable to set the head reference of #F 61,15 - Unable to set the tail reference of #F 61,16 - Current element does not have a head or a tail attribute 61,17 - Default orientation only available for piping and hanger components. 61,18 - Default orientation cannot be found. Previous element either notpositioned and oriented or not selected. 61,19 - Direction undefined for towards origin of current element 61,20 - Current element type unsuitable for DIRECTION command 61,21 - SPREF can only be selected for a piping or hanger component 61,22 - LSTUBE can only be selected for a piping component 61,23 - HSTUBE can only be selected for a BRANCH 61,24 - LSROD can only be selected for a hanger component 61,25 - HSROD can only be selected for a HANGER 61,26 - TUBE can only be selected for a BRANCH or a piping component 61,27 - ROD can only be selected for a HANGER or a hanger component 61,28 - Only BRANCHs, HANGERs, and piping and hanger components can be selected 61,29 - #F is not a SPEC 61,30 - #F is not a SPCOM 61,31 - Cannot find SPCOM #N 61,32 - Appending #N to specification name gives a name of more than 50 characters. 61,33 - Angle attributes can only be given values between -180 and +180 degrees. 61,34 - Degenerate orientation specified 61,35 - Pins cannot be used for connecting piping or hanger components 61,36 - Reconnecting #F 61,37 - Connection to #F is invalid ( HREF / TREF do not point back to nozzle ) 61,38 - #F is locked, reconnection fails 61,39 - #F is in a read-only database, reconnection fails 61,40 - Plane parallel to movement direction 61,41 - Default movement direction only available for piping and hanger components. 61,42 - Default movement direction not available. Previous element either notpositioned and oriented or not selected. 61,43 - ARRIVE / LEAVE ppoint cannot be determined. Current element hasprobably not been selected. 61,44 - Default movement origin cannot be determined. 61,45 - BOP and TOP can only be used with piping and hanger components. 61,46 - DIRECTION command only operates on ppoints of the current element 61,47 - Bad DIRECTION - zero degree angle specified 61,48 - Point set does not allow variable angle. Angle is unchanged, direction is in correct plane. 61,49 - Unable to achieve specified direction - probably due to unconventionalpointset 61,50 - Pin numbers must be in the range 1 to 10 61,51 - Unable to position pin #I 61,52 - Unable to orientate pin #I 61,53 - Unable to copy the marker 61,54 - A pin cannot be made the current ppoint 61,55 - Cannot find current ppoint - probably due to changing SPREF 61,56 - Current ppoint not set 61,73 - Revolution angle attribute must be between -360 and +360 61,74 - Illegal value(s) for attribute #H 61,75 - #F is not a branch, reconnect fails 61,76 - Connection to a database that is not open, reconnection fails 61,77 - Cannot find P-point 1 - Nozzle catalogue reference probably not set 61,78 - Reconnect not allowed at WORLD or GPWL level 61,79 - #F cannot own nozzles 61,80 - Cannot access SPCOM from which to reselect 61,81 - To position the HEAD / TAIL of a branch or hanger use POS / MOVE PH / PT / HH / HT ... 61,82 - BOP / TOP cannot be used on a HEAD / TAIL that has not been positioned 61,83 - Default clearance is only available for piping or hanger components 61,84 - Shear attributes can only be given values between -89 and +89 degrees. 61,85 - #F cannot be flipped - it either has to have ARRIVE and LEAVE attributes or be a SCTN. 61,86 - Warning - #F: Angle #R is greater than maximum specified in SPREF (#F)(expected range #R to #R) 61,87 - Warning - #F: Angle #R is less than minimum specified in SPREF (#F)(expected range #R to #R) 61,88 - SPREF not found or unset 61,89 - #F does not have a Local-axes attribute 61,90 - Warning - the Upping value has been set to 0.0 61,91 - Significant element must be CLAIMED before database can be updated 61,92 - Do you wish to claim significant element #F ? (y/n) 61,93 - Element #F has no valid geometry for position purposes 61,94 - Invalid SPREF on element #F 61,95 - Cannot connect to a ppoint with number greater than 10 61,100 - F&M: Object name #N is too long 61,101 - F&M: Object name #N has invalid syntax 61,102 - F&M: Menubar field cannot have zero length display text 61,103 - F&M: Attempt to track null attribute 61,104 - F&M: Interrupt button not defined 61,105 - F&M: Pixmaps not enabled for Gadget #N 61,106 - F&M: Wrong pixmap type for gadget #N 61,107 - F&M: Cannot change #N, it is not a dynamic property for Gadget #N 61,108 - F&M: The Application Window is already defined 61,109 - F&M: Application Window not supported on UNIX platform 61,110 - F&M: Spare 61,111 - F&M: Form #N must be a Resizable Document to be set Maximised 61,112 - F&M: Form type is already set for form #N 61,113 - F&M: Attempt to reference a non-existent F&M object 61,114 - Invalid command when GRAPHICS ON 61,115 - Invalid command when GRAPHICS OFF 61,116 - No graphics device set 61,117 - F&M: Pixmap file #N not found 61,118 - F&M: Form #N cannot be shown/hidden during its definition 61,119 - F&M: Form #N definition is not allowed during form INITialisation 61,120 - F&M: Warning: parent was not shown, form is stand-alone 61,121 - F&M: Warning: Form #N exceeds screen 61,122 - F&M: Unable to set/get gadget #N value or gadget not found 61,123 - F&M: Form #N not found 61,124 - F&M: Form #N may not be killed 61,125 - F&M: Gadget #N not found 61,126 - F&M: Item invalid as contents of form 61,127 - F&M: global name #N already in use 61,128 - F&M: Form #N may not be hidden 61,129 - Cannot open Recreate file 61,130 - File error while restoring data - RESTORE aborted 61,131 - File error while restoring data - please exit from module and re-enter 61,132 - Unable to RESTORE - databases modified since module state SAVEd 61,133 - Unable to SAVE - cannot access SAVE file 61,134 - Unable to SAVE - SAVE file already in use 61,135 - Unable to RESTORE - SAVE file already in use 61,136 - Unable to RESTORE - cannot access SAVE file 61,137 - Unable to RESTORE - cannot find SAVE file 61,138 - Unable to RESTORE - current database files are not those which were inuse when module state SAVEd 61,139 - Unable to RESTORE - module version number/screen size/font size is notthe same as SAVE file 61,142 - #N contains more than #I files, list truncated 61,143 - Cannot access directory #N 61,150 - Only piping components, nozzles and equipments can be dragged 61,151 - #F is connected to #F which is in a read only database. Thisconnection will be broken by drag. 61,152 - #F has a connection to an unknown element. This connection will bebroken by drag. 61,153 - #F is locked, drag aborted 61,154 - The connection from #F to #F will be broken by drag. 61,155 - Attachment points can only be dragged if they have been positionedand oriented 61,160 - Spec is not set up correctly for CHOOSE command 61,161 - #F is not a piping component 61,162 - SPEC does not contain #H elements 61,163 - SPEC does not contain correct bore structure for CHOOSE.Use CHOOSE WITH #H .... 61,164 - SPEC does not contain elements matching given criteria 61,165 - Previous component, #F, has zero bore 61,166 - Unforced Connections are #H 61,167 - Forced Connections are #H 61,168 - Connections are OFF 61,169 - Warning - Requested bore #B does not match current bore #B 61,170 - Choose autoc #H 61,171 - Choose forcec #H 61,172 - #H is set to #H 61,173 - SPEC does not contain elements matching given criteria.Use CHOOSE WITH #H #N 61,174 - SPEC does not contain correct structure for CHOOSE. 61,175 - HOFFSET must be positive ( not zero ) 61,176 - Display arctolerance cannot be less than 0.1mm 61,189 - Fatal error in FLEXlm forcing exit. 61,190 - Fatal error detected by Graphics Package forcing a return to MONITOR module 61,191 - Are your databases to be updated with the changes made this session (NB: Picture Files & the Spatial Map will ... 61,192 - Fatal error detected by SPLASH forcing a return to MONITOR module 61,199 - No changes made this session. Return to Monitor? (Y or N) 61,208 - Illegal autolimits produced. ( Does it have any primitives? ) 61,209 - Mix values for colours are percentages ( 0 - 100 ) 61,220 - Failed to connect. 61,221 - Cannot calculate default orientation. 61,222 - Y values must be in the range #R to #R. 61,223 - X values must be in the range #R to #R. 61,224 - You cannot set this system reserved colour name or synonym 61,225 - User colours must be in range 1 to #I 61,226 - Autolimits may only be set for graphic views 61,227 - Error #I setting colour #I 61,230 - Error reading from plot or picture file .. 61,231 - Unrecognised code in plotfile 61,250 - File already exists 61,251 - Cannot open plot or picture file 61,252 - Plotfile is too large for UNDERLAY / PICTURE. Only first part will be shown. 61,272 - Already using file - #N for alpha output 61,273 - Cannot open alpha output file 61,274 - No alpha output file in use. 61,275 - Already using log file - #N 61,276 - Cannot open log file - #N 61,278 - No log file in use. 61,279 - Error reading from file - not found or wrong type 61,280 - Invalid #H attribute #I at #F 61,281 - #F ignored. TYPE must be PIPE, BRAN, DRAW or SPLDRG 61,282 - Unable to navigate to #F 61,283 - Unable to get #H attribute from #F 61,284 - Invalid HREF at #F 61,285 - Error at ppoint #I of #F 61,286 - Warning: SMAX is zero. #F has not been spool numbered or has no spools 61,287 - Part number query message #I does not exist 61,288 - Message 288 61,289 - #F connected to #F with unset CREF 61,290 - No connection back to #F from #F 61,291 - Part number attributes have not been set for #F 61,292 - Invalid component group 61,293 - No connection back to the branch head from #F 61,294 - Attribute #H has not been set for #F 61,295 - #H (#N) for #F is not an integer. Cannot partnumber per spool. 61,296 - Unable to set #H attribute at #F 61,297 - #H attribute required at #F 61,298 - #H #I at #F is inconsistent with connecting tube part number #I 61,299 - Part number check failed for #F 61,300 - Only significant and drawable elements can be marked 61,301 - Tube / Rod can only be marked if it is already active / visible 61,302 - Only piping and hanger components, branches and hangers have associatedimplied tube / rod 61,303 - Direction cannot be calculated between two design points with the same position - UP is assumed 61,304 - Position cannot be calculated as lines are parallel - first point given is assumed 61,305 - Position cannot be calculated as line and plane are parallel - first point given is assumed 61,306 - Angle cannot be calculated as two points are coincident - zero assumed 61,307 - Only significant and drawable elements can be tagged by type 61,308 - Line cannot be constructed as planes are parallel 61,309 - Line cannot be constructed as points are coincident 61,310 - Line cannot be projected on to parallel or normal plane 61,311 - No implied tube or rod to highlight. 61,312 - Length of implied tube or rod must be positive. 61,313 - Plane cannot be constructed through collinear points 61,320 - Aid line number must be a positive value 61,321 - Implied tube cannot be enhanced for #F as it has attribute SPKBRK = FALSE 61,350 - Offspring of #F that were not already in theactive / visible list will not be shown graphically 61,351 - The WORLD and GPWLs cannot be added / removed. SITEs can only be added using 'ADD SITE' in a setup context. 61,352 - Only significant elements and their offspring can be used with the ACTIVE and VISIBLE commands 61,353 - Only significant elements and their offspring can be drawn in design context 61,354 - The WORLD, SITEs and GPWLs cannot be drawn in setup region context 61,355 - No more than ten elements can be added at one time 61,356 - The number of active elements must be one or more 61,357 - #F is not a SITE 61,358 - Only SITEs or ZONEs can be specified for ADD WITHIN. The default is all sites in the multiple database. 61,359 - Translucency must be in the range 0 to 99 61,360 - HEADTUBE can only be queried at a BRANCH 61,361 - LEAVETUBE can only be queried at a Branch Component 61,362 - DRRF attribute cannot reference a #H; must be a DRAW or ZONE 61,363 - Cannot find #H attribute 61,370 - #H #I at #F exceeds #H #I at #F 61,371 - Duplicate part numbers #I, #H at #F and #H at #F 61,372 - Highest part number in #F is currently #I 61,373 - Spool number #H #N should be unset at #F 61,374 - Spool number #H should be set at #F 61,375 - Spool number #H should be #N at #F 61,376 - Invalid spool number #H #N at #F 61,377 - Spool number #H #N at #F exceeds SMAX #I at #F 61,378 - Head and tail of #F at same position 61,379 - Spool number attributes have not been correctly set for #F 61,380 - SPSP attributes have not been correctly set for #F 61,381 - Spool number check failed for #F 61,382 - #F contains flanged components with both OLD and NEW bolting methods 61,383 - #H[#I] attribute required at #F 61,384 - Invalid #H[#I] attribute #I at #F 61,385 - #H[#I] attribute #I at #F exceeds #H #I at #F 61,386 - Duplicate part numbers #I, #H[#I] at #F and #H at #F 61,387 - Duplicate part numbers #I, #H[#I] at #F and #H[#I] at #F 61,388 - Attribute #H[#I] at #F set to #I should be 0 61,389 - Using NEW bolting method 61,390 - Using OLD bolting method 61,391 - Cannot find piping spec for flanged component #F 61,392 - Cannot calculate bolting requirements of #F 61,393 - Bolting: incompatible BSEL attributes at #F and #F 61,394 - Cannot calculate bolting requirements for joint #F - #F 61,395 - Found #I bolting items at #F - Only the first #I have been numbered 61,396 - Piping spec #F does not have BLTM attribute set to NEW 61,400 - Region #I 61,401 - Scale #R 61,402 - Limits ( Scale #R ) 61,449 - PPline #H OF #F 61,450 - E #R N #R U #R wrt world 61,455 - #F 61,460 - Pin #I 61,461 - DP #I of #F 61,462 - Dpoint #I of =#I/#I 61,468 - Two cursor points required 61,472 - Cannot use the cursor input for setting variables. 61,473 - Cannot set variables within cursor mode. 61,480 - Invalid character for cursor mode 61,484 - More than one page of output.Input Q to quit, other characters to continue. 61,485 - Line #N 61,486 - Through #N 61,487 - PPline #H OF =#I/#I 61,488 - =#I/#I 61,489 - P#I of #F 61,490 - Ppoint #I of =#I/#I 61,491 - Pin #I 61,492 - #H of #F 61,493 - SYSTEM ERROR - Illegal use of macro callback variable 61,494 - F&M: Initialisation failed, could not display form 61,495 - F&M: Already trying to display a form, cannot display new one 61,496 - F&M: Cannot display freestanding blocking form from blocking form 61,497 - F&M: Cannot WAITon a non-blocking form or display any form from a WAITon form 61,498 - F&M: Cannot display a non-blocking form from a blocking form 61,499 - F&M: Cannot swap parent of a blocking form 61,500 - Setup display 61,501 - Setup region #I 61,502 - Design 61,503 - ( Cursor mode ) 61,504 - Three-d point 61,505 - Cursor Mode 61,506 - Pan / Zoom all regions 61,507 - Pan / Zoom single region 61,508 - Two-d point 61,509 - First corner of region 61,510 - Identify element 61,511 - Identify design point 61,512 - Identify tube 61,513 - Identify #H 61,514 - Three-d window - First point 61,515 - Three-d window - Second point 61,516 - Three-d window - Third point 61,517 - Three-d window - Fourth point 61,518 - Two-d window - First point 61,519 - Two-d window - Second point 61,520 - Second corner of region 61,521 - Navigate to: 61,522 - Identify Pline 61,523 - Enter a 3-d position 61,524 - Identify design ppoint 61,525 - Enter 2nd point to define third coordinate 61,526 - Enter a name 61,527 - Identify a view 61,528 - User exit from submode 61,529 - Identify P&ID element 61,530 - Enter a constrained 3-d position through E #D N #D U #D 61,541 - Active 61,542 - Visible 61,543 - Aids 61,544 - Plotfile 61,545 - Pen 1 61,546 - Pen 2 61,547 - Pen 3 61,548 - Pen 4 61,549 - Pen 5 61,550 - Pen 6 61,551 - Pen 7 61,552 - Pen 8 61,553 - Pen 9 61,554 - Pen 10 61,555 - Pen 11 61,556 - Pen 12 61,557 - F&M: Unknown field type #N 61,558 - F&M: Cannot find requested field #N 61,559 - F&M: View gadget has wrong subtype for this operation 61,560 - F&M: Max menu size is #I characters wide. Field may be truncated 61,561 - F&M: Workstation screen is not available, using TTY 61,562 - F&M: Object #N is not of the correct type for this operation 61,563 - F&M: Could not find required gadget #N 61,564 - F&M: Cursor functions not allowed during Tracking updates 61,565 - F&M: Point entered is not in a suitable view 61,566 - F&M: Gadget, Menu, Variable or Property name already exists on form 61,567 - F&M: Cannot find required field #N in list/menu 61,568 - F&M: Prompt strings may only be loaded in PROMPT OFF mode 61,569 - F&M: CADCxxxx is a reserved form name 61,570 - F&M: Number required. 61,571 - F&M: Number must be in the range #R to #R 61,572 - F&M: Name must not contain spaces 61,573 - F&M: Integer required. 61,574 - F&M: ISOU number required: a or a' or a'b or a'b.c/d 61,575 - F&M: No list data for single choice list 61,576 - F&M: Unhandled error detected in gadget callback 61,577 - F&M: ALPHA gadget defined has no channels attached 61,578 - F&M: Selected field is off end of list 61,579 - F&M: SELECTOR gadgets must have a length greater than ONE. 61,580 - F&M: 3d view RADIUS must be greater than zero 61,581 - F&M: RANGE must be greater than zero for object #N 61,582 - F&M: System error - INIT callback not valid on code-displayed forms 61,583 - F&M: Invalid format object for text field #N 61,584 - F&M: Number of values must match number or RTexts in list gadget 61,585 - F&M: Too many values for the list gadget 61,586 - F&M: Only one OK button allowed on a form. Control type will be ignored. 61,587 - F&M: Only one CANCEL button allowed on a form. Control type will be ignored. 61,588 - F&M: Only one HELP button allowed on a form. Control type will be ignored. 61,589 - F&M: Warning - Menu Field has no callback or Form associated with it. 61,590 - F&M: Error - First argument should be either "RText" or "DText". 61,591 - F&M: Pixmap file #N is of wrong format or corrupt 61,592 - F&M: Method has wrong number of arguments 61,593 - F&M: Method has wrong argument types 61,594 - F&M: Illegal format for interaction callback "#N" 61,595 - F&M: Input mode has unexpected feedback handler type 61,596 - F&M: Input mode not found 61,597 - F&M: Input mode already exists 61,598 - F&M: Input mode definition invalid 61,599 - F&M: Cannot use .delete method to kill a F&M object 61,600 - F&M: Clipping box not correctly dimensioned. #H is less or equal to zero. 61,601 - F&M: Cannot change size of view gadget on a non-resizeable form. 61,602 - F&M: Operation only allowed inside a form definition 61,603 - F&M: WARNING: Attempt to place gadget #N off limits of form 61,604 - F&M: Requested colour not found in colour dictionary 61,605 - F&M: Operation not allowed on form which has never been mapped to screen. 61,606 - F&M: Bad variable name 61,607 - F&M: Variable not found 61,608 - F&M: You cannot change a DO variable 61,609 - F&M: Variable value too large or too small 61,610 - F&M: Variable is not a scalar 61,611 - F&M: Cannot index into this property 61,612 - F&M: Cannot convert this variable to required type 61,613 - F&M: Cannot change the assigned F&M object for this variable 61,614 - F&M: Cannot set a readonly F&M object property 61,615 - F&M: Object or Value is unset 61,616 - F&M: Array invalid: heterogeneous, wrong type or sparse 61,617 - F&M: Gadget does not have a value 61,618 - F&M: Value is not of the appropriate type 61,619 - F&M: Array/string is too large or too small 61,620 - F&M: Value is invalid 61,621 - Colour selection rule #I does not exist 61,622 - Maximum number of AUTOcolours exceeded - Please delete some before adding more 61,631 - Both references are in the same db! 61,632 - A foreign db is being referenced 61,633 - A macro already exists for this pair of references. 61,634 - Too many interdb macros open. 61,635 - No interdb macros defined. 61,636 - Unable to determine whether FLGD p-point #I of #F is joint start or end 61,637 - No valid BLRF attribute of CATREF for #F 61,638 - Unable to find mating flange for p-point #I of #F 61,639 - Unequal member counts for #F and #F excluding jacking bolts 61,640 - Mismatch in BDIA attributes between members of #F and #F 61,641 - Connection type is not flanged 61,642 - Unable to navigate to BRAN from #F 61,643 - #F has no members - unable to calculate bolts 61,644 - Unable to find bolt number #I of #F 61,645 - BDIA = 0.0 for bolt number #I of #F 61,646 - Bolt number #I is greater than total number of bolts: #I for this joint 61,647 - More than 2 bolts located in bolt path #I of #F 61,648 - Bolt path #I of #F is inconsistent 61,649 - Inconsistent BTYP combination #H and #H detected 61,650 - More than #I gaskets within the joint 61,651 - Incompatible BSEL attributes at #F and #F 61,652 - Bolt number #I is invalid (less than 1) 61,660 - Qualifier expression must evaluate to TRUE or FALSE 61,661 - Input mode is not of correct handler type for this qualifier 61,662 - Aid Qualifier must be a text expression eg ('BOX') 61,663 - Unable to determine detailed pick data for element #F 61,670 - F&M: Frame gadgets on MAIN forms must be of type TOOLBAR 61,671 - F&M: Frame gadgets of type TOOLBAR only allowed on MAIN forms 61,672 - F&M: Unknown property #N 61,673 - F&M: Tabset frame is not allowed within a tabset frame 61,674 - F&M: Menu #N attempts to reference itself 61,675 - F&M: Menu #N is already referenced by another menu of the form 61,676 - F&M: Cannot change usage of Menu #N from #N to #N 61,677 - F&M: Unknown menu type #N 61,678 - F&M: DTEXT #N already exists for gadget or menu #N 61,679 - F&M: Could not swap to requested Main form 61,680 - F&M: Cannot access column data for gadget #N, it is not multi-column 61,681 - F&M: No column headings supplied for gadget #N 61,682 - F&M: Total column headings string length too big for gadget #N 61,683 - F&M: Total column DTEXT string(s) length too big for gadget #N: Truncated 61,684 - F&M: Invalid operation for gadget #N, multi-selection is not supported 61,685 - F&M: Row data does not match number of rows for gadget #N 61,686 - F&M: Column data does not match number of columns for gadget #N 61,687 - F&M: Integer must be in the range #I to #I for object #N 61,688 - F&M: Cannot find radio button #N for gadget #N 61,689 - F&M: Range limits are not multiples of step size for object #N 61,690 - F&M: Object #N has no callback 61,691 - F&M: Callback object #N not found 61,692 - F&M: Callback object #N is not undoable 61,700 - Help System: Error, can not find help script. 61,701 - Help System: Error, environment var HELPSCRIPT is not defined. 61,702 - Help System: Error, can not find help file #N 61,703 - Help System: Error, can not find xref file #N 61,704 - HTML Help is not supported on this platform, check help file #N 61,710 - #F Routed 61,711 - Cannot open router DSO due to:-#N 61,712 - Incorrect Router Library version. It is #I but should be #I. 61,720 - Router warning 61,721 - Clash on route unavoidable in #F 61,722 - Database error 61,723 - Could not order #F for routing 61,724 - A constraint on #F is invalid 61,725 - Out of memory 61,726 - #F has two multiport constraints with no intervening constraints 61,727 - Invalid constraint list in #F 61,728 - Invalid reference #F 61,729 - Reference #F is not a branch 61,730 - Reference #F is not a pipe 61,731 - Repositioning failed - check spec of #F 61,732 - Stacking to head of #F which has null HCON 61,733 - Stacking to tail of #F which has null TCON 61,734 - Could not find valid connection component for #F; please check spec 61,735 - #F is orientated but not positioned 61,736 - #F is positioned but not orientated 61,737 - Position of #F breaks major-orientation rule 61,738 - Position of #F breaks upstream-distance rule 61,739 - Component #F clashes 61,740 - #F has fixed POS but not ORI; default used 61,741 - No leg long enough for #F 61,742 - Paused 61,743 - Trying to stack fixed component #F to head 61,744 - Trying to stack fixed component #F to tail 61,745 - Clash on simplest pipe rack route 61,746 - Fixed component #F clashes 61,747 - No bend for non-orthogonal head of #F 61,748 - No bend for non-orthogonal tail of #F 61,749 - Unable to position component #F to satisfy downstream rule 61,750 - Cannot find space for the pipe in the pipe rack or routing plane 61,751 - Unavoidable clash near constraint on #F for #F 61,752 - Unable to position component #F to satisfy elevation rule 61,753 - Unable to position component #F to satisfy location rule 61,754 - #F has no components and free tail; Head and tail will coincide 61,755 - Trying to place #F after #F - 61,756 - Trying to place #F before #F - 61,757 - Moving #F along leg 61,758 - Putting #F in best available place after #F 61,759 - Putting #F in best available place before #F 61,760 - #F stacked to head 61,761 - #F stacked to tail 61,762 - Trying to place #F as first component - 61,763 - Pipe racks need to be adjacent in space when adjacent in constraint list 61,764 - Pipe racks need to be orthogonal when adjacent in constraint list 61,765 - Unable to position component #F to satisfy upstream rule for next component 61,766 - Unable to position component #F to satisfy downstream rule for previous component 61,767 - #F clashes when stacked onto adjacent component 61,768 - PSPEC for #F is not set 61,769 - Clash near fixed component #F 61,770 - Avoiding minimum tube problem in #F 61,771 - Adding extra bend/elbow to avoid overlapping bends/elbows in #F 61,772 - Cannot route #F as component #F is not selected 61,773 - Unavoidable clash near head of #F 61,774 - Unavoidable clash near tail of #F 61,775 - Unable to position component #F to satisfy minor orientation rule 61,776 - Cannot create bend/elbow in #F 61,777 - Routing plane group #F must have at least one entry plane and one travel plane 61,778 - Cannot create suitable reducer in #F 61,779 - Ignore clash with connected #F 61,780 - Router Internal Error 61,781 - Low on memory 61,791 - No licences available for Piperouter 61,792 - Piperouter security error: #I 61,793 - Piperouter security error 61,800 - Head working point of #F is an unknown reference 61,801 - Tail working point of #F is an unknown reference 61,802 - Tail working point of #F is before head working point 61,803 - Constraint #I of #F is before the head work point 61,804 - Constraint #I of #F is after the tail work point 61,805 - Constraint #I of #F contains an unknown reference 61,806 - #N#F clashing with #F 61,807 - #N#F clashing with leave tube of #F 61,808 - #N#F clashing with arrive tube of #F 61,809 - Cannot round slot for #F 61,810 - Weighted Packing method requested for #F where travel is vertical 61,811 - Weighted Packing method requested for #F which is entry / exit plane 61,812 - Could not order #F for routing. The head position cannot be derived. 61,813 - Could not order #F for routing. The tail position cannot be derived. 61,814 - Connection to #F is invalid ( CREF points back to a different branch ) 61,815 - Route for #F violates minimum tube length 61,816 - Space too constricted to route #F 61,817 - Space too constricted to route #F - is overhang on pipe rack too small? 61,818 - #F ( type #H ) #N for #F 61,819 - Using 45 degree bend between routing planes #F and #F 61,820 - No reducer which satisfies rule - using default for #F 61,821 - PML #F could not be run. 61,822 - #F clash with #F ignored. 61,823 - Clash near balanced Tee #F 61,824 - Could not balance Tee #F 61,825 - Geometry of component #F not appropriate for it to be on routing plane 61,826 - Fixed component #F is not correctly aligned with the plane 61,827 - Fixed Component #F locked on plane but is not above / below it 61,828 - Could not obtain user constraints from database 61,829 - Fixed Component #F on plane is not inline with previous Fixed Component. 61,830 - Fixed component #F is vertically offset #D from the calculated elevation. Any Shoe Height rules will be ignored. 61,831 - Flange Width rule at #F ignored due to returning negative result. 61,832 - Warning - planes #F and #F have different z - directions. 61,833 - Warning - planes #F and #F have different widths. 61,834 - Cannot route branches connected head-to-head 61,835 - Problem connecting head - HREF component may be unpositioned 61,836 - Cannot create bend/elbow after #F 61,837 - Cannot create bend/elbow before #F 61,838 - Cannot put component #F on plane #F; already on a plane 61,839 - Cannot put component #F on plane/rack #F; already on rack/plane 61,840 - Cannot put component #F on rack #F; already on a rack 61,841 - Pipe rack slot determined by locked component #F clashes ************************************************************************************** 62 - INTERPIPE QUERY ************************************************************************************** 62,2 - Obstruct 62,7 - Angle 62,19 - Laxes 62,20 - Orient 62,25 - Bore 62,55 - Hdir 62,56 - Hpos 62,58 - Tdir 62,59 - Tpos 62,90 - DPpoint 62,91 - Position 62,92 - Direction 62,93 - Parrive 62,94 - Pleave 62,95 - Phead 62,96 - Ptail 62,97 - Hhead 62,98 - Htail 62,99 - Ppoint 62,100 - Connect 62,101 - Gradient 62,102 - BOP 62,103 - TOP 62,104 - OD 62,105 - Pin 62,106 - Arrow 62,107 - Wgrid 62,108 - Hitradius 62,109 - Tolerance 62,110 - Ratio 62,111 - Offset 62,112 - Region xr 62,113 - yr 62,114 - Scale 62,115 - Look 62,116 - Through 62,117 - Onto xr 62,118 - Turn 62,119 - Axes 62,120 - Limits 62,121 - From 62,122 - To 62,123 - Underlay 62,124 - Picture 62,125 - No Type Name Position in owner 62,126 - Insulation thickness 62,127 - Draw level ( Pipes ): 62,128 - Draw level ( Nozzles ): 62,129 - Draw level ( General ): 62,130 - Region 62,131 - Sequence 62,132 - Mode 62,133 - Alpha 62,134 - Graphical 62,135 - Centreline 62,136 - Tube 62,137 - Insulation 62,138 - Hoffset 62,139 - Keyplan 62,140 - Cl 62,141 - Underlays 62,142 - Draw level ( Structures ): 62,143 - Suspend 62,144 - Info 62,145 - Align 62,146 - Pnode 62,147 - Snode 62,148 - size 62,149 - colour 62,150 - Width 62,151 - Height 62,152 - Borders 62,153 - Shading 62,154 - Auto 62,156 - Ppoint Length 62,157 - Ppoint Numbers 62,158 - Pkey 62,159 - Pline 62,160 - Pline length 62,161 - head 62,162 - tail 62,163 - start 62,164 - end 62,165 - Hole 62,166 - Value of rule = 62,167 - Value of attribute = 62,168 - Rule executed for attribute 62,169 - Rules 62,170 - Leave tube of 62,171 - Leave rod of 62,195 - Darctolerance 62,196 - Display Arctolerance 62,197 - Mass Properties Detail 62,198 - LogChanges 62,199 - Representation 62,200 - Fvar 62,201 - Refno 62,202 - List 62,203 - Type 62,204 - Owner 62,205 - Lock 62,206 - Name 62,207 - Attributes 62,208 - Database 62,209 - Units 62,210 - Star 62,211 - Mode 62,212 - Dimension points 62,213 - Points 62,214 - Entries 62,215 - Element 62,216 - Members 62,217 - Count 62,218 - None 62,219 - Var 62,220 - unset 62,221 - Forwards 62,222 - Backwards 62,223 - Distance 62,224 - DDL - Mark 62,225 - Setup 62,226 - Setup display 62,227 - Design 62,228 - Window 62,229 - Pen 62,230 - kill display 62,231 - remove all 62,232 - level 62,233 - Add 62,234 - Mark 62,235 - Pline 62,236 - Delposition 62,237 - Opdirection 62,238 - Cutplane 62,239 - Drnstart 62,240 - Drnend 62,241 - Posstart 62,242 - Posend 62,243 - Offset 62,244 - Start 62,245 - End 62,246 - Nposition 62,255 - Directory count 62,256 - Directory contents 62,257 - List position 62,258 - 2D viewing plane 62,259 - Surface Area : 62,260 - Volume : 62,261 - Centroid : 62,262 - Inertia : 62,263 - Ppline 62,264 - mm 62,265 - in 62,266 - ft 62,267 - sq 62,268 - cu 62,301 - Attribute message not found. 62,311 - Not a legal attribute name 62,313 - Not implemented in this module 62,317 - Wrong type of attribute 62,318 - Not an attribute of CE 62,323 - Array too small. 62,326 - Transformation matrix not found. 62,327 - Region does not exist. 62,328 - Region setting syntax in Setup mode. 62,329 - Setup mode syntax in Region setting mode. 62,330 - Error decoding parameters. 62,331 - Search question not in Spec. 62,332 - File already exists. 62,333 - Cannot open file. 62,334 - Error transferring data to file. Check output macro. 62,335 - Cannot access file for output. 62,336 - Error in transformation matrix. 62,337 - Direction specified where a position is required 62,338 - Position specified where a direction is required 62,339 - Orientation specified where a position or direction is required 62,340 - Could not calculate the mass properties for this element 62,350 - LPFK 62,351 - KPFK 62,352 - SPFK 62,360 - Automatic Clash Detection 62,361 - Desclash autoclash #H exit 62,384 - is an empty array 62,385 - Perspective 62,386 - Parallel 62,387 - Walkthrough 62,388 - Radius 62,389 - From 62,390 - Range 62,391 - Step 62,394 - by 62,397 - at 62,398 - for 62,399 - length 62,400 - unset 62,401 - #I 62,402 - #S 62,403 - #R 62,405 - #N 62,406 - #F 62,413 - E 62,414 - W 62,415 - N 62,416 - S 62,417 - U 62,418 - D 62,419 - true 62,420 - false 62,421 - On 62,422 - Off 62,423 - text 62,424 - X #R 62,425 - Y #R 62,426 - Z #R 62,427 - X 62,428 - Y 62,429 - Z 62,430 - Easting 62,431 - Westing 62,432 - Northing 62,433 - Southing 62,434 - Upping 62,435 - Downing 62,436 - wrt 62,437 - Y is 62,438 - and Z is 62,439 - of 62,440 - V in 62,441 - H 62,442 - ft 62,443 - in 62,444 - mm 62,445 - Full 62,446 - Brief 62,447 - Visible 62,448 - Hide 62,449 - Active 62,450 - Aids 62,451 - Frame 62,452 - Show 62,453 - Trace 62,454 - - 62,455 - IPARAM 62,456 - PARAM 62,457 - TIMES 62,458 - TANF 62,459 - DIFF 62,460 - SUM 62,461 - SINF 62,462 - COSF 62,463 - ONE 62,464 - DDRADIUS 62,465 - DDANGLE 62,466 - DDHEIGHT 62,467 - P 62,468 - $. 62,469 - wrt world 62,470 - plane 62,471 - through 62,472 - T 62,473 - Value 62,474 - Formula 62,475 - TWICE 62,476 - DESIGN 62,477 - APARAM 62,478 - OPARAM 62,479 - MULT 62,480 - DIV 62,481 - line 62,487 - RX 62,488 - RY 62,489 - RZ 62,490 - DX 62,491 - DY 62,492 - DZ 62,493 - Profile 62,500 - Grey 62,501 - Red 62,502 - Orange 62,503 - Yellow 62,504 - Green 62,505 - Cyan 62,506 - Blue 62,507 - Violet 62,508 - Brown 62,509 - White 62,510 - Pink 62,511 - Mauve 62,512 - Turquoise 62,513 - Indigo 62,514 - Black 62,515 - Magenta 62,516 - Setpen 62,517 - Colour 62,518 - Mix 62,519 - Visible 62,520 - Active 62,521 - Plotfile 62,522 - Graphics 62,523 - Alpha 62,524 - Background 62,525 - Axes 62,526 - Ppoints 62,527 - Geomsets 62,528 - Frames 62,529 - Setcolour 62,530 - Sethighlight 62,531 - CE 62,532 - Clash 62,533 - Obst 62,534 - Aids 62,541 - Translucency 62,542 - Edges On 62,543 - Edges Off 62,574 - Comparator Matched 62,575 - Comparator Mismatched 62,576 - Comparator Unmatched Connector 62,577 - Comparator Unmatched 62,581 - Number of question/answers is 62,582 - Question number #I is 62,583 - Answer number #I is 62,584 - Number of question/answers is out of range. Valid range is 1 to #I 62,585 - Cannot find question #H 62,586 - and Answer is 62,587 - Answer to Question #H is 62,588 - Too many levels in SPEC. Limit is #I 62,589 - Selection cannot be determined as SPCO is owned by /*LIMBOSPEC 62,590 - Cannot find question #H#I 62,591 - Answer to Question #H#I is 62,592 - Max Answer number #I is 62,593 - and Max Answer is 62,611 - Clipping Xlength 62,612 - Clipping Ylength 62,613 - Clipping Zlength 62,614 - Clipping Orientation 62,615 - Clipping Position 62,616 - Clipping Cap Fast 62,617 - Clipping Cap Slow 62,618 - Clipping Cap On 62,619 - Clipping Cap Off 62,620 - Clipping Cap Colour Default 62,621 - Clipping Cap Colour #I 62,622 - Clipping Disable 62,623 - Clipping Enable 62,624 - Clipping Box 62,631 - Aid Line 62,632 - Number #I 62,633 - Aid Text 62,634 - At 62,635 - Next Free Text Number is #I 62,636 - Next Free Line Number is #I 62,637 - Next Free Arrow Number is #I 62,638 - Aid Arrow 62,639 - Proportion 62,640 - Filenote 62,641 - Output file 62,642 - Holes 62,643 - Encoding 62,651 - Linestyle 62,652 - Solid 62,653 - Dashed 62,654 - Dotted 62,655 - Dashdot 62,656 - Aid Arc 62,657 - Thru 62,658 - Diameter 62,659 - Aid Sphere 62,660 - Next Free Arc Number is #I 62,661 - Next Free Sphere Number is #I 62,662 - Filled On 62,663 - Aid Box 62,664 - Next Free box Number is #I 62,665 - At 62,666 - Ori 62,667 - Aid Cylinder 62,668 - Next Free Cylinder Number is #I 62,669 - Aid Translucency #I 62,701 - Number of Internal Constraints is 62,702 - Internal Constraints Number #I is type 62,703 - POINT 62,704 - LINE 62,705 - PLANE 62,706 - Internal Constraints Number #I is at 62,707 - No Direction set for Internal Constraints Number #I 62,708 - Direction of Internal Constraints Number #I is 62,709 - No Component ordering set for Internal Constraints Number #I 62,710 - Internal Constraints Number #I is 62,712 - Before 62,713 - After 62,714 - Internal Constraints Number #I starts at 62,715 - Internal Constraints Number #I finishes at 62,716 - Leave Direction of Internal Constraints Number #I is 62,717 - Routing Plane of Internal Constraints Number #I is 62,718 - No Position set for Internal Constraints Number #I 62,719 - No Routing Plane set for Internal Constraints Number #I 62,720 - Fixed 62,721 - Floating 62,722 - Infinite 62,723 - Finite 62,724 - Last 62,725 - No LAST component set for Internal Constraints Number #I 62,726 - No OFFSET set for Internal Constraints Number #I 62,727 - Offset 62,728 - No Datum set for Internal Constraints Number #I 62,731 - Error #H 62,732 - Order #H 62,733 - Direction #H 62,734 - Mode #H 62,735 - Iterations #I 62,736 - PDMS Router #N 62,737 - Pipe Rack Spacing #D 62,738 - Pipe Rack Option #H 62,739 - Pipe Rack rounding #D 62,751 - Selection 62,752 - Logical 62,753 - Action 62,754 - General Rule Set is 62,755 - General Rules are not set. 62,756 - General Rule Saved. 62,757 - General Rule Result. ************************************************************************************** 63 - ALL PDMS ATTRIBUTES FOR NEW QUERY SYSTEM ************************************************************************************** 63,1 - Abrev 63,2 - Acbore 63,3 - Accs 63,4 - Acdu 63,5 - Adend 63,6 - Allowance 63,7 - Andi 63,8 - Angle 63,9 - Answer 63,10 - Applic 63,11 - Aproperty 63,12 - Arctol 63,13 - Arrive 63,14 - Atname 63,15 - Attype 63,16 - Batch 63,17 - Bcpy 63,18 - Bdiameter 63,19 - Bflex 63,20 - Bgrid 63,21 - Blengths 63,22 - Bltref 63,23 - Bore 63,24 - Bproperty 63,25 - Btext 63,26 - Btol 63,27 - Bufs 63,28 - Built 63,29 - Bunits 63,30 - Bvisible 63,31 - Casref 63,32 - Catref 63,33 - Catype 63,34 - Ccentre 63,35 - Cclass 63,36 - Chsize 63,37 - Ciref 63,38 - Ciweight 63,39 - Clearance 63,40 - Clflag 63,41 - Cmpref 63,42 - Copies 63,43 - Corallow 63,44 - Cpid 63,45 - Cpnm 63,46 - Cproperty 63,47 - Cpty 63,48 - Cpull 63,49 - Cputwist 63,50 - Cref 63,51 - Crfa 63,52 - Cstref 63,53 - Ctxt 63,54 - Ctype 63,55 - Curd 63,56 - Cweight 63,57 - Date 63,58 - Dbmo 63,59 - Dbnm 63,60 - Dbno 63,61 - Dbottom 63,62 - Dcsize 63,63 - Ddimension 63,64 - Ddref 63,65 - Decplaces 63,66 - Defaults 63,67 - Defleft 63,68 - Definition 63,69 - Defright 63,70 - Density 63,71 - Descript 63,72 - Detail 63,73 - Dfflex 63,74 - Dflfactors 63,75 - Dfsize 63,76 - Dfunits 63,77 - Diameter 63,78 - Didirection 63,79 - Dimtype 63,80 - Direction 63,81 - Diref 63,82 - Displace 63,83 - Dlimit 63,84 - Dmflex 63,85 - Dscode 63,86 - Dtext 63,87 - Dtop 63,88 - Dual 63,89 - Dunits 63,90 - Duty 63,91 - Efactor 63,92 - Eposition 63,93 - Erection 63,94 - Expansion 63,95 - Fcoeff 63,96 - Fcpy 63,97 - Fcyn 63,98 - Fdbf 63,99 - Fihe 63,100 - Finm 63,101 - Fino 63,102 - Flen 63,103 - Flimit 63,104 - Flowd 63,105 - Fluref 63,106 - Fnam 63,107 - Force 63,108 - Function 63,109 - Funi 63,110 - Gbox 63,111 - Gmref 63,112 - Gtype 63,113 - Hbore 63,114 - Hconn 63,115 - Hdir 63,116 - Height 63,117 - Hitfile 63,118 - Hpos 63,119 - Href 63,120 - Hspec 63,121 - Hsrod 63,122 - Hstube 63,123 - Htype 63,124 - Infa 63,125 - Infb 63,126 - Insched 63,127 - Intv 63,128 - Ipressure 63,129 - Ispec 63,130 - Just 63,131 - Larrow 63,132 - Laxes 63,133 - Lbox 63,134 - Lchain 63,135 - Leave 63,136 - Lend 63,137 - Length 63,138 - Level 63,139 - Lframe 63,140 - Lhead 63,141 - Line 63,142 - Lntp 63,143 - Llead 63,144 - Lline 63,145 - Location 63,146 - Lock 63,147 - Loffline 63,148 - Loose 63,149 - Lsrod 63,150 - Lstressed 63,151 - Lstube 63,152 - Ltail 63,153 - Ltyp 63,154 - Mark 63,155 - Matref 63,156 - Matxt 63,157 - Maxanswer 63,158 - Maxu 63,159 - Mcmx 63,160 - Mcno 63,161 - Mdbf 63,162 - Mfla 63,163 - Mlimit 63,164 - Mode 63,165 - Moment 63,166 - Mrkr 63,167 - Multiplier 63,168 - Nload 63,169 - Noff 63,170 - Npoint 63,171 - Nstd 63,172 - Number 63,173 - Obstruct 63,174 - Offline 63,175 - Orient 63,176 - Oriflag 63,177 - Origin 63,178 - Orna 63,179 - Osht 63,180 - Outdiam 63,181 - Owner 63,182 - Paaxis 63,183 - Parameter 63,184 - Password 63,185 - Paxis 63,186 - Pbaxis 63,187 - Pbbt 63,188 - Pbdistance 63,189 - Pbdmeter 63,190 - Pboffset 63,191 - Pbore 63,192 - Pbtp 63,193 - Pcaxis 63,195 - Pcbt 63,196 - Pcoffset 63,197 - Pconnect 63,198 - Pctp 63,199 - Pdiameter 63,200 - Pdistance 63,201 - Pen 63,202 - Pheight 63,203 - Plotfile 63,204 - Pname 63,205 - Poffset 63,206 - Poissons 63,207 - Posflag 63,208 - Position 63,209 - Pqualifier 63,210 - Pradius 63,211 - Prdi 63,212 - Pressure 63,213 - Prfc 63,214 - Prfl 63,215 - Prjd 63,216 - Prjn 63,217 - Proffset 63,218 - Pspec 63,219 - Ptdistance 63,220 - Ptdmeter 63,221 - Ptemp 63,222 - Ptradius 63,223 - Ptref 63,224 - Pts 63,225 - Ptspec 63,226 - Pwastage 63,227 - Px 63,228 - Pxbshear 63,229 - Pxlength 63,230 - Pxtshear 63,231 - Py 63,232 - Pybshear 63,233 - Pylength 63,234 - Pytshear 63,235 - Pz 63,236 - Pzlength 63,237 - Qualifier 63,238 - Question 63,239 - Radius 63,240 - Rating 63,241 - Rcpy 63,242 - Read 63,243 - Retr 63,244 - Revision 63,245 - Rflfactors 63,246 - Rinertia 63,247 - Rinside 63,248 - Rlimit 63,249 - Rmflex 63,250 - Rname 63,251 - Rotation 63,252 - Routside 63,253 - Rposition 63,254 - Rpressure 63,255 - Rtemp 63,256 - Rtext 63,257 - Rtype 63,258 - Rurf 63,259 - Rvsn 63,260 - Safclass 63,261 - Sbra 63,262 - Scale 63,263 - Sdthick 63,264 - Secu 63,265 - Sense 63,266 - Shape 63,267 - Shear 63,268 - Shockload 63,269 - Shop 63,270 - Sif 63,271 - Sigfigures 63,272 - Size 63,273 - Skey 63,274 - Smno 63,275 - Source 63,276 - Spec 63,277 - Sposition 63,278 - Spref 63,279 - Sref 63,280 - Sspec 63,281 - Stat 63,282 - Stext 63,283 - Stress 63,284 - Styp 63,285 - Syposition 63,286 - Syref 63,287 - Syscale 63,288 - Tbore 63,289 - Tconn 63,290 - Tdbf 63,291 - Tdir 63,292 - Temf 63,293 - Temp 63,294 - Tgradient 63,295 - Title 63,296 - Tpos 63,297 - Tref 63,298 - Tspec 63,299 - Ttext 63,300 - Tuflag 63,301 - Tvisible 63,302 - Txsp 63,303 - Tyna 63,304 - Tynu 63,305 - Uiweight 63,306 - Udname 63,307 - Upnm 63,308 - Upty 63,309 - Uref 63,310 - Usrf 63,311 - Usrn 63,312 - Uweight 63,313 - Vdm 63,314 - Wdiameter 63,315 - Wefactor 63,316 - Weigh 63,317 - Message 317 63,318 - Wifactor 63,319 - Workfile 63,320 - Wpressure 63,321 - Wrdb 63,322 - Wrus 63,323 - Wtolerance 63,324 - Xbottom 63,325 - Xbshear 63,326 - Xfil 63,327 - Xlength 63,328 - Xoff 63,329 - Xrelative 63,330 - Xtext 63,331 - Xtop 63,332 - Xtshear 63,333 - Xyposition 63,334 - Xysize 63,335 - Ybottom 63,336 - Ybshear 63,337 - Ylength 63,338 - Yoff 63,339 - Youngs 63,340 - Yrelative 63,341 - Ytext 63,342 - Ytop 63,343 - Ytshear 63,344 - Zlength 63,345 - Ztext 63,346 - Pskey 63,347 - Splh 63,348 - Spln 63,349 - Splt 63,350 - Asubtended 63,351 - Adegrees 63,352 - Approver 63,353 - Appdate 63,354 - Atext 63,355 - Atolerance 63,356 - Message 356 63,357 - Author 63,358 - Baindicator 63,359 - Bulgefactor 63,360 - Blnk 63,361 - Bpoffset 63,362 - Cpoffset 63,363 - Bsrf 63,364 - Cheight 63,365 - Cspacing 63,366 - Chamfers 63,367 - Clrf 63,368 - Criteria 63,369 - Etext 63,370 - Message 370 63,371 - Dlevel 63,372 - Dpen 63,373 - Dmtx 63,374 - Doffset 63,375 - Message 375 63,376 - Dposition 63,377 - Dtoffset 63,378 - Lissue 63,379 - Fpen 63,380 - Message 380 63,381 - Gaps 63,382 - Message 382 63,383 - Frpos 63,384 - Hrsf 63,385 - Idlname 63,386 - Idname 63,387 - Insulation 63,388 - Laynumber 63,389 - Lterminator 63,390 - Pkdistance 63,391 - Llclearance 63,392 - Lpen 63,393 - Plrf 63,394 - Message 394 63,395 - Message 395 63,396 - Normal 63,397 - Lspacing 63,398 - Message 398 63,399 - Lvisibility 63,400 - Mpen 63,401 - Nlpn 63,402 - Nppt 63,403 - Obstflag 63,404 - Ocode 63,405 - Oset 63,406 - Osrf 63,407 - Oslv 63,408 - Pjust 63,409 - Plclearance 63,410 - Pldirection 63,411 - Pltx 63,412 - Dtxpen 63,413 - Message 413 63,414 - Pmode 63,415 - Psymbols 63,416 - Ptoffset 63,417 - Region 63,418 - Rrsf 63,419 - Rcode 63,420 - Sorf 63,421 - Spline 63,422 - Styf 63,423 - Tmrf 63,424 - Message 424 63,425 - Truncate 63,426 - Dmsp 63,427 - Tpen 63,428 - Tubeflag 63,429 - Cline 63,430 - Vtype 63,431 - Alignment 63,432 - Limits 63,433 - Dterminator 63,434 - Ptfa 63,435 - Dtcheight 63,436 - Ptcheight 63,437 - Message 437 63,438 - Lshape 63,439 - Message 439 63,440 - Nsize 63,441 - Ppdirection 63,442 - Ptrf 63,443 - Tlindicator 63,444 - Mlnpen 63,445 - Clpen 63,446 - Ddname 63,447 - Pvno 63,448 - Plines 63,449 - Tgrstatus 63,450 - Revdate 63,451 - Font 63,452 - Ffpen 63,453 - Purpose 63,454 - Oposition 63,455 - Oangle 63,456 - Onpos 63,457 - Perspective 63,458 - Thpos 63,459 - Vscale 63,460 - Ucode 63,461 - Count 63,462 - Bsfn 63,463 - Osfn 63,464 - Wmax 63,465 - Wldn 63,466 - Fradius 63,467 - Notf 63,468 - Pstf 63,469 - Shrf 63,470 - Spsf 63,471 - Rpen 63,472 - Cpen 63,473 - Nrows 63,474 - Ncols 63,475 - Tcode 63,476 - Uline 63,477 - Bpfg 63,478 - Dfont 63,479 - Pfont 63,480 - Profile 63,481 - Plnpen 63,482 - Plspacing 63,483 - Bfpen 63,484 - Obpen 63,485 - Message 485 63,486 - Ucurrent 63,487 - Message 486 63,488 - Message 487 63,489 - Message 488 63,490 - Rvauthor 63,491 - Trsf 63,492 - Clmode 63,493 - Xyscale 63,494 - Cmpx 63,495 - Wldp 63,496 - Ptno 63,497 - Ptnt 63,498 - Ptnb 63,499 - Ptnh 63,500 - Pmax 63,501 - Ctyattached 63,502 - Ctyowning 63,503 - Bangle 63,504 - Ctyend 63,505 - Ctystart 63,506 - Delposition 63,507 - Desparameters 63,508 - Zdistance 63,509 - Drnend 63,510 - Drnstart 63,511 - Fixty 63,512 - Grade 63,513 - Gstreference 63,514 - Jline 63,515 - Joiend 63,516 - Joistart 63,517 - Nareference 63,518 - Stsection 63,519 - Stcategory 63,520 - Plaxis 63,521 - Pangle 63,522 - Pwidth 63,523 - Pkey 63,524 - Posend 63,525 - Posline 63,526 - Posstart 63,527 - Detref 63,528 - Opdirection 63,529 - Cutplane 63,530 - Pstreference 63,531 - Stspecification 63,532 - Offset 63,533 - Firesistance 63,534 - Inreference 63,535 - Cutback 63,536 - Nposition 63,537 - Sforce 63,538 - Eforce 63,539 - Smoment 63,540 - Emoment 63,541 - Szdist 63,542 - Ezdist 63,543 - Antype 63,544 - Lcase 63,545 - Srelease 63,546 - Erelease 63,547 - Nrelease 63,548 - Drgp 63,549 - Smax 63,550 - Jnum 63,551 - Joip 63,552 - Jmax 63,553 - Mtoc 63,554 - Mtot 63,555 - Mtoh 63,556 - Comment 63,557 - Mtoxarray 63,558 - Dmtype 63,559 - Dmfarray 63,560 - Hdmtype 63,561 - Hdmfarray 63,562 - Tdmtype 63,563 - Tdmfarray 63,564 - MtoReference 63,565 - MtoLength 63,566 - MtoQuantity 63,567 - Ddnx 63,568 - Idlx 63,569 - Idnx 63,570 - Oldkey 63,571 - Mlist 63,572 - Olist 63,573 - Reflist 63,574 - Elelist 63,575 - Dmode 63,576 - Ukey 63,577 - Ulen 63,578 - Ablen 63,579 - Ntolen 63,580 - Unum 63,581 - Nextid 63,582 - Description 63,583 - Rptx 63,584 - Udname 63,585 - Dflt 63,586 - Uunit 63,587 - Cmdf 63,588 - Uuse 63,589 - Qua 63,590 - Qub 63,591 - Keys 63,592 - Refs 63,593 - Hash 63,594 - Vals 63,595 - Utype 63,596 - Dtype 63,597 - Dreal 63,598 - Access 63,599 - Uuhash 63,600 - Key 63,601 - StartAngle 63,602 - EndAngle 63,603 - JustPline 63,604 - Fref 63,605 - DX 63,606 - DY 63,607 - DRAD 63,608 - DWID 63,609 - DataKEY 63,610 - PropertyUNIts 63,611 - PPROperty 63,612 - DaTasetREf 63,613 - NegGMsetRef 63,615 - DTITle 63,616 - Drrf 63,617 - Scode 63,618 - Cspc 63,619 - Cdrg 63,620 - Cnumber 63,621 - Carea 63,622 - Name 63,623 - Ref no 63,624 - Type 63,625 - DXL 63,626 - DYL 63,627 - Cfreference 63,628 - Pfreference 63,629 - Xreference 63,630 - Mvertex 63,631 - Ljcback 63,632 - Sjustification 63,633 - Spsp 63,634 - StlRef 63,635 - SupRef 63,636 - Area 63,637 - Module 63,638 - CStandard 63,639 - CConnection 63,640 - OwnConnection 63,641 - AttConnection 63,642 - CColour 63,643 - Icon 63,644 - CPlot 63,645 - JFree 63,646 - CDetail 63,647 - LClm 63,648 - LNew 63,649 - Modattr 63,650 - DNouns 63,651 - DBcontrol 63,652 - Userid 63,653 - Dtlfile 63,654 - MemLine 63,655 - Tanswer 63,656 - Tdefault 63,657 - Ptcdir 63,658 - Apoffset 63,659 - Curfit 63,660 - Vratio 63,661 - Dlfg 63,662 - Tsize 63,663 - Akey 63,664 - Ddegrees 63,665 - Dflag 63,666 - Dstyle 63,667 - DTangle 63,668 - PTangle 63,669 - DTuline 63,670 - DTflag 63,671 - DTradius 63,672 - CHosht 63,673 - CHpen 63,674 - Dlpen 63,675 - Plpen 63,676 - Dtpen 63,677 - Ptpen 63,678 - Llpen 63,679 - Lfpen 63,680 - Dpfn 63,681 - Splp 63,682 - Akeylist 63,683 - Plnames 63,684 - Arno 63,685 - Exfile 63,686 - Picfilename 63,687 - Basekey 63,688 - Spindlekey 63,689 - Scale 63,690 - Orientation 63,691 - Flow 63,692 - Dime 63,693 - Insulation 63,694 - Tracing 63,695 - Blrf 63,696 - Bspec 63,697 - Bltmethod 63,698 - Bthk 63,699 - Btype 63,700 - Bitem 63,701 - Bitl 63,702 - Xtra 63,703 - Azilimits 63,704 - Azisetflag 63,705 - Beadefault 63,706 - Beafactor 63,707 - Bealimits 63,708 - Beasetflag 63,709 - Heidefault 63,710 - Heifactor 63,711 - Heilimits 63,712 - Heisetflag 63,713 - Raddefault 63,714 - Radfactor 63,715 - Radlimits 63,716 - Radsetflag 63,717 - Dconn 63,718 - Etype 63,719 - Ttype 63,720 - Refatt 63,721 - Dpsf 63,722 - Ddsf 63,723 - Dddfault 63,724 - Ddproperty 63,725 - Ddefaults 63,726 - Rdefaults 63,727 - Ddirection 63,728 - Dplx 63,729 - Zdirection 63,730 - Rsetflag 63,731 - Dsetflag 63,732 - Fponumber 63,733 - Tponumber 63,734 - Refindex 63,735 - Lisposition 63,736 - Ppnumber 63,737 - Lreference 63,738 - Orrf 63,739 - Ptype 63,740 - Mflg 63,741 - Preflag 63,742 - Poeflag 63,743 - Azidefault 63,744 - Azifactor 63,745 - Acport 63,746 - Atlst 63,747 - Bbff 63,748 - Bfrf 63,749 - Btlst 63,750 - Cffarray 63,751 - Cpfarray 63,752 - Cposition 63,753 - Gtxt 63,754 - Invf 63,755 - Mfarray 63,756 - Resolution 63,757 - Surface 63,758 - Virflag 63,759 - Tarflag 63,760 - Target 63,761 - Pvifilter 63,762 - Bsel ************************************************************************************** 64 - DRAFT ************************************************************************************** 64,1 - Users are not allowed to alter #H attributes 64,2 - Users are not allowed to move to #H elements 64,3 - Users are not allowed to copy members of #H elements 64,4 - Users are not allowed to copy #H elements 64,5 - Users are not allowed to create #H elements 64,6 - Users are not allowed to delete #H elements 64,7 - Users are not allowed to delete members of #H elements 64,8 - Users are not allowed to reorder or include #H elements 64,9 - #F is not in an accessible Library 64,10 - #F is of the wrong size to use in #F 64,11 - Attribute #H must be a word or a positive integer 64,12 - Only 1 Layer with PURPose #H is allowed per View 64,13 - PURPose #H is reserved 64,14 - Error in setting attribute #H 64,15 - Value of #H must be positive 64,16 - Value of #H must be positive or zero 64,17 - #H attribute length invalid 64,18 - #H cannot be zero vector 64,19 - #H cannot be a multiple of 180 degrees 64,20 - #F has more than 1 #H, therefore a #H cannot be created at the current database level 64,21 - #H elements may not have more than #I members 64,22 - Attribute #H value #N is reserved 64,37 - No elements found in specified volume 64,38 - Error in DB - Picture world does not exist 64,39 - #F: adding or removing this ID List would form circular definition 64,40 - Specified Label Library name (#N) does not exist 64,41 - Specified name (#N) is not a Label Library (LALB) 64,42 - Current element is not a General Label (GLAB) 64,43 - Element identified is not a General Label (GLAB) 64,44 - General Label (GLAB) incorrectly identified 64,45 - Label Template #N created 64,46 - in Label Library #N 64,47 - Unable to create Label Template #N 64,48 - Unable to create SLAB to replace GLAB #N 64,49 - Template name (#N) already exists 64,50 - Label Library #N is not accessible 64,51 - This command is only available at ID Lists 64,52 - Selection list cannot be ALL 64,53 - #F: ID List cannot be added to or removed from itself 64,54 - #F: Branch or Hanger components cannot be removed 64,55 - #F: illegal type of element for adding or removing 64,56 - Add/Remove entry incorrectly identified 64,57 - - ID List entry ignored 64,58 - #H #I 64,59 - Illegal reference: Entry #I 64,60 - This command is only available at #H elements 64,61 - Element identified is not a Hatch Style 64,62 - Element identified is not a #H 64,63 - Invalid Rule definition 64,64 - #F: #H attribute value is invalid 64,65 - #F: #H attribute unset 64,66 - #F: Selection criteria not properly defined 64,67 - Warning: Name #N is undefined 64,68 - Warning: Element #N does not exist 64,69 - Warning: Selection criteria contains invalid element name: #N 64,70 - deleted 64,71 - does not exist 64,72 - #F is wholly included in #F 64,73 - #F is only partially included in #F 64,74 - #F is NOT included at all in #F 64,75 - Check Refs OFF 64,76 - Check Refs WARNING 64,77 - Check Refs FULLCHECK 64,78 - #H attribute not found 64,79 - with #H attribute = 64,80 - This command is not valid at #H elements 64,81 - Warning: No current Design Databases in MDB 64,82 - This facility has not yet been implemented 64,83 - #F - #H attribute not set 64,84 - #F not satisfactorily defined or constructed, (RPEL error #I) 64,85 - #F - 64,86 - - must be at a #H 64,87 - Warning: 64,88 - Ppoint number must be between 0 and 99 - P0 assumed 64,89 - #F is not a design element 64,90 - #F cannot be sketched 64,91 - - Plane is not properly defined 64,92 - Specified element (#F) is not a #H 64,93 - Specified element (#F) is not suitable for this command 64,94 - - Plane and View directions are incompatible 64,95 - Cannot climb to a #H from current position 64,96 - Specified element type (#H) is not a #H 64,97 - Cannot navigate to #H #I from current position 64,98 - #F - no VRTXs found to sketch 64,99 - No gaps found to sketch 64,100 - Input a point on the current sheet 64,102 - Input #I point(s) on a sheet 64,104 - to x #R mm y #R mm 64,108 - Try again! 64,117 - Input start and end of gap 64,118 - Pick point 64,119 - P#I of #F 64,120 - Pick label to apply 64,123 - You must input on the current sheet 64,127 - You must input in the current view region 64,130 - label copy #F 64,131 - label template #F 64,132 - in #F 64,133 - #F 64,134 - Pick element 64,135 - Cursor input invalid at this stage. 64,136 - Tubing of #F 64,137 - from x #R mm y #R mm 64,138 - You must input in a View rectangle 64,139 - You must input two points in the same View rectangle 64,140 - GTYPE can only be OPEN or CLOSE 64,141 - Value of #H must be a multiple of 90 degrees 64,142 - #F: illegal type of element for attribute #H 64,143 - You cannot alter the size of a #H once it contains members 64,144 - #H is of the wrong size to use in #F 64,145 - #N is of the wrong size to use in #F 64,146 - Pen numbers must lie between 1 and #I 64,147 - Font numbers must lie between 1 and #I 64,148 - #H: Invalid primitive type 64,149 - #F is being instanced by itself at #F 64,150 - Referenced Plane does not exist 64,151 - #F: #H attribute not properly set 64,152 - #F: corner points not properly defined 64,153 - #F: Generation of #N graphics abandoned 64,154 - #F not satisfactorily defined 64,155 - Illegal current element - only FPLAs and SPLAs can be switched 64,156 - Plane attribute #H not properly set - unable to switch Plane action 64,157 - Specified element is not a FPLA or SPLA 64,158 - #F satisfactory 64,159 - #F NOT satisfactory 64,160 - #F: not enough corner points, at least #I are required for a Stepped Plane with Gtype #H 64,161 - Current element is not a FPLA or SPLA 64,162 - Specified position is on Retain side of #F when used in standard mode 64,163 - Specified position is on Discard side of #F when used in standard mode 64,164 - Specified position is on line of #F 64,165 - - side cannot be determined 64,166 - #F: first and last corner points lie on the same extrusion line 64,167 - Invalid Section Plane - defining polygon self-intersects 64,168 - Plane point #I does not exist 64,169 - #F: Adjacent corner points #I and #I lie on the same extrusion line 64,170 - Gaps cannot be sketched for the specified database element 64,171 - Specified element type (#H) cannot be highlighted 64,172 - No elements found 64,173 - Unable to highlight #F in #F 64,174 - Warning: #F does not appear in #F but in #F 64,175 - Draughting primitive origins cannot be sketched for a #H 64,176 - No draughting primitive origins found to sketch 64,177 - #F: Nothing to highlight 64,178 - #F does not appear in #F 64,179 - Pick markers & modify #H 64,181 - E #R mm 64,182 - W #R mm 64,183 - N #R mm 64,184 - S #R mm 64,185 - U #R mm 64,186 - D #R mm 64,187 - Input two points in the same View 64,188 - 3-d coordinates cannot be calculated from a 2-d position in a View with a non-orthogonal viewing direction 64,189 - Cursor hit must be within a View region 64,195 - Input next point 64,197 - Specified element type is not hittable by cursor 64,198 - Pick a position for the new vertex 64,208 - Phead of #F 64,209 - Ptail of #F 64,210 - Define TO & THROUGH points 64,216 - of #F 64,222 - Pick a draughting primitive or a point on a STRA, ARC or OUTL 64,226 - Select a possible origin of the #H 64,227 - CIRCUM X #Rmm Y #Rmm Angle #R 64,228 - Pick a possible point of the #H 64,239 - Select a position on a Pline 64,240 - prop #R 64,243 - Pick an Intersection point 64,244 - Pick an Endpoint of a line or arc 64,245 - Input #H component of 2-d position 64,246 - Pick a Line, Arc or Circle 64,247 - Pick a Line or an Arc 64,248 - Pick an arc, circle or ellipse 64,250 - Warning: Limits of View may have changed - update drawing if necessary 64,251 - Updating Design graphics for #F 64,252 - Warning: View of Design may have changed - update drawing if necessary 64,253 - #F: unable to claim (error 2,#I) - Tag Rules will not be updated 64,254 - Regenerating Picture for #F 64,255 - Updating of #F abandoned 64,256 - The UPDATE command cannot be used in read-only databases 64,257 - No more Overlay layers may be added at this stage 64,258 - Cannot update Tag Rules in Batch mode or in Read-only database 64,259 - Warning: #F not properly defined so unable to do full checking, unwanted labels may be generated 64,260 - #F: #H attribute references a non-existent or corrupt element, generation of labels for this #H abandoned 64,261 - #F: Selection Rule not properly defined, generation of labels for this #H abandoned 64,262 - Warning: #F definition changed - update Tag Rules if necessary 64,263 - Warning: #F contains #I invisible VIEW(s) 64,264 - #F is LOCKed, updating of its Tag Rules abandoned 64,265 - Cannot update Tag Rules owned by TRST 64,266 - #H =#I/#I deleted or re-used, #F excluded 64,267 - #H =#I/#I deleted or re-used, design element deleted 64,268 - #F tagged, (#H =#I/#I re-used) 64,269 - #F tagged, (#H =#I/#I created) 64,270 - #F is not included within ID List of current View 64,271 - IDLN attribute of current View is not set 64,272 - IDLN attribute of #F is not set 64,273 - - unable to check #F 64,274 - - Reference checking cannot be performed 64,275 - #N is not valid at #H elements 64,276 - Regions and Schedules must use one of TLEFT,TRIGHT,BLEFT,BRIGHT or CENTRE 64,277 - Illegal value(s) for attribute #H 64,278 - Unable to create #H 64,279 - Users are not allowed to name #H elements 64,280 - You cannot alter the size of a #H once its backing sheet is defined 64,281 - Symbol template #F is not in a symbol library and cannot be used in a SYMB 64,282 - #N is only valid at a #H, not at a #H 64,283 - #F: #H now unset 64,284 - Users are not allowed to lock/unlock #H elements 64,285 - Pline #H does not exist for #F 64,286 - #F generated from Tag Rule - #H attribute cannot be changed 64,287 - #F generated from Tag Rule - it cannot be included in another Layer 64,288 - #F generated from Tag Rule - it cannot be deleted 64,289 - TMRF cannot reference a Label generated from a Tag Rule 64,290 - #N illegal at this stage 64,291 - Degenerate orientation 64,292 - No Rules referenced - the default Style will be used for all elements 64,293 - No Rule applicable to #F found - the default Style will be used 64,294 - #F applies to #F - #F will be used 64,295 - #F applies to #F - attribute #H not set 64,296 - Warning: #F is invalid & will be ignored 64,297 - #F applies to #F - it will be omitted 64,298 - No HRules referenced - no hatching will be applied to any element 64,299 - No HRule applicable to #F found - it will not be hatched 64,300 - Specified gap(s) not found 64,301 - Line cannot contain more than #I gaps 64,302 - Cannot find design element associated with current annotation element: 64,303 - Current element is of wrong type for this command 64,304 - Specified design element does not match that assoc. with current element 64,305 - Invalid label application sequence 64,306 - Specified element is not a #H 64,307 - Specified View has no Layer for applied labels 64,308 - Specified element is not a label template 64,309 - Specified element is not a design element 64,310 - Picture or part thereof may need to be regenerated 64,311 - Specified View has no Layer with the Purpose #H 64,312 - The dimension direction cannot be defined from its dimension points 64,313 - #F or associated dimension point has undefined or incompatible position or direction 64,314 - #F: Projection line parallel to Dimension line 64,315 - Projection line and dimension line lie on opposite sides of the dimension point 64,316 - Access not permitted to the specified Library element 64,317 - #F: Projection line parallel to View direction 64,318 - Current element is not a Dimension point. 64,319 - Default value is inappropriate for attribute #H 64,320 - #F has no associated 64,321 - At least 2 dimension points must already have been drawn 64,322 - New dimension point coincides with existing dimension point or origin 64,323 - Invalid attribute value 64,324 - Dimension point Sort failed 64,325 - Cannot access a Dimension point from this level 64,326 - Cannot create a Dimension point at this level 64,327 - View definition matrix unavailable 64,328 - This syntax cannot be used on the first dimension point 64,329 - Text must be dimension line text or projection line text 64,330 - Dimension attachment point must already have been defined 64,331 - First or current Dimension point must already have been drawn 64,332 - #F: Dimension direction parallel to View direction 64,333 - Cannot set attribute of dimension element at this stage 64,334 - Dimension point of type #H cannot be owned by a #H 64,335 - Specified element does not contain graphics Views or Layers 64,336 - Specified element is not an ID list or design/catalogue element 64,337 - The limits specified do not form a volume 64,338 - No ID list. 64,339 - #F: Cannot draw Design Graphics of an annotation Layer or Library 64,340 - #F: Cannot draw Annotation graphics of the Design Layer 64,341 - #F: must specify option required: ALL, DESI, ANNO, or TAGS 64,342 - Region incorrectly specified. Assumed to be same as Paper 64,343 - Warning: View region overlaps sheet limits 64,344 - Cannot access a graphics element from #F 64,345 - #F: Not in the correct database for this command 64,346 - #F: Cannot update Design graphics at this level 64,347 - #F: empty ID list 64,348 - Warning: #F overlaps 64,349 - #F: Design graphics for elements of this type not implemented yet 64,350 - cannot get #H values 64,351 - #H value or number out of range 64,352 - Illegal scaling command when #H is differentially scaled - use XYSCALE 64,353 - #I elements with null or illegal #H attributes have been deleted. 64,354 - 'OFF' is not valid at #H elements 64,355 - Invalid command at or below a #H 64,356 - NULREF is the only value allowed for attribute #H 64,357 - Text must be dimension line text 64,358 - Illegal paper size 64,359 - Only paper size A0 to A7 allowed 64,360 - #F: Unable to draw 64,361 - - #H attribute does not reference an existing element 64,362 - Gap length must be greater than 0 64,363 - Pline not used for #H position 64,364 - Pline not used for #H position - cannot use Pline for angle 64,365 - - cannot calculate Pline distance 64,366 - Dimension text line-spacing cannot be set 64,367 - Specified direction is incompatible with existing dimension 64,368 - #F is not sufficiently defined for its dimension points to be sorted 64,369 - Illegal command in a Perspective View 64,370 - No design elements found to tag 64,371 - Updating Tags for #F 64,372 - #H attribute changed since last updating, all tags will be regenerated 64,373 - #F: Dimension centre is undefined 64,374 - #F: Dimension circumference is undefined 64,375 - #F: Illegal combination of Design element and AKEY value (#H) 64,376 - #F: Dimension centre and/or circumference is undefined 64,377 - #F: Element unsuitable for use in RDIM Radial dimension 64,378 - Warning: Invalid array index range for codeword #N in #F 64,379 - Substrings may not be used with codeword #N 64,380 - Codeword #N is invalid for this text attribute 64,381 - Invalid substring definition - #N 64,382 - Warning: Data not accessible for codeword #N in #F 64,383 - Codeword #N must be included in this text attribute 64,384 - Codeword #N does not exist 64,385 - Codeword #N must appear alone in a text attribute 64,386 - Expanded text not available 64,387 - for #H template at a SLAB 64,388 - Codeword #N must refer to a #H name 64,389 - #H syntax not allowed with this codeword 64,390 - Error in #H parameter - #N 64,391 - Reference array must be followed by an array index 64,392 - Array index not allowed with this codeword 64,393 - Invalid Text syntax - #N 64,394 - Warning: Null text string for this codeword - #H attribute unset 64,395 - No font to toggle to 64,396 - Too many fonts used - alternative font selected 64,397 - Illegal array index definition 64,398 - You can only add single byte fonts to font families 1 through 4 64,399 - #F: Dimension direction not orthogonal, so unable to calculate single coordinate for codeword #N 64,400 - Warning at #F: specified font not properly defined 64,401 - The picture for #F has been unloaded to make space 64,407 - The specified database item is not suitable in this context. 64,408 - Your co-ordinate does not refer to a sheet or Library. 64,409 - Warning: the specified #H value lies outside of the sheet 64,412 - Unable to create Plotfile - the maximum allowed dimension (#R) is exceeded 64,413 - #F: #N is not a Plotfile 64,414 - Cannot open Plotfile #N 64,415 - #F is not a picture element and so cannot be loaded/unloaded 64,416 - #F is already loaded 64,417 - #F: Cannot open Plotfile #N 64,418 - The minimum drawing dimension is below the limit of #R 64,419 - The specified border width is less than the limit #R 64,420 - The specified file already exists - use the overwrite option to suppress 64,421 - The display is empty 64,422 - All symbol Libraries (if any) are already loaded 64,423 - There are no loaded symbol Libraries 64,424 - #F is not loaded 64,425 - Too many pictures are loaded 64,426 - Illegal value for SCALEUP ratio 64,431 - The specified #H value lies outside of the View region 64,432 - Warning: the specified point lies outside the VIEW 64,438 - Pictures currently Loaded are: 64,439 - #I Pictures Listed 64,440 - Pictures currently UNLoaded are: 64,441 - #F: Unable to calculate limits 64,442 - SMODE functionality: #I components omitted 64,443 - #F: Invalid limits caused by incompatible section planes 64,444 - The SHOW CHANGES option will be ignored when issued below a View 64,445 - #F: no #N defined 64,446 - No current Comparison Date or Stamp defined. UPDATE SHOW CHANGES abandoned 64,447 - #F: no changed #N elements found to highlight 64,448 - View of Design has changed. You will need to update design graphics 64,449 - Pipe Sketch View must be used for Pipe Pieces and Pipe Spools 64,450 - Pen number out of range 64,451 - Colour number out of range for device and plotter pens 64,452 - No graphics device, only plotter pen attributes will be set 64,453 - No graphics device, so device pen attributes cannot be set 64,454 - Colour number out of range for device pens 64,455 - Scale value must be between 1 and #I 64,456 - Hatch pattern numbers must be between 1 and #I 64,457 - Glyph numbers must be between 1 and #I 64,458 - Line picture numbers must be between 1 and #I 64,459 - Invalid definition for Hatch pattern #I 64,460 - Invalid definition for Line picture #I 64,461 - Line thickness numbers must be between 1 and #I 64,462 - Line pattern numbers must be between 1 and #I 64,463 - Invalid definition for Line pattern #I 64,464 - Invalid definition for Glyph #I 64,470 - Unable to model #F - 64,471 - Unable to model Tubing of #F - 64,472 - GML Error #I 64,473 - Unable to do hidden line removal for #F - 64,474 - Unable to add #F to scene table - 64,475 - Unable to draw #F - 64,476 - Unable to do hidden line removal - 64,477 - Warning at #F: internal limit reached; further primitives in this significant element will be treated as current one 64,478 - Warning at #F: internal limit reached; further Plines in this significant element will be treated as current one 64,479 - Warning: internal limit reached; no more polylines will be generated for this element 64,490 - #F: #H attribute updated to #F 64,491 - #F: unable to update #H attribute 64,492 - Included 64,493 - Partially included 64,494 - Excluded 64,495 - Database is incompatible (Mark Number #I) and must be reconfigured 64,496 - User interrupt detected, command aborted 64,497 - Attributes cascaded to OLAY from system attributes on SHEE 64,498 - #F should precede #F in owner's list 64,499 - Command illegal in this database (Mark Number #I) 64,500 - #F: Failed to open picture file (#N #N). 64,501 - #F: Picture file has the wrong version number. 64,502 - #F: Picture requires updating. 64,503 - #F: Picture needs to be loaded. 64,504 - #F: Unable to write picture file (#N #N) 64,505 - #F: Unable to define master - no further symbol templates allowed in this picture 64,506 - #F: warning - only #I more symbol templates will be allowed in this picture. 64,507 - Symbol Font not included in Module 64,508 - #F: Failed to find segment - picture may require Update 64,509 - Unable to set transform on #H segment 64,510 - Use UPDATE PICTURE command. 64,511 - Cannot access picture-file directory #N. You need to create this directory 64,512 - Error copying Picture-file: 64,513 - #F: Picture graphics out of date: 64,514 - Updating annotation graphics for #F 64,515 - #F: Unable to read picture file (#N). 64,516 - File error on VDSTORE work file 64,517 - Warning - File error on FSTORE work file 64,518 - File error on MFSTORE work file 64,520 - Current & previous VRTXs are coincident. Unable to calculate span radius or angle subtended 64,521 - Angle subtended cannot be zero for an arc with TCOD as endpoint 64,523 - Warning: #F: Two points are superimposed 64,524 - Zero length radius. 64,525 - 3-d coordinates cannot be calculated from a distance in a View with a non-orthogonal viewing direction 64,526 - #I-d coordinates cannot be calculated from a distance relative to a #I-d point. 64,529 - #F: Invalid draughting point definition 64,530 - Ppoint direction is parallel to the viewing direction 64,531 - #F has been repeated #I times 64,532 - More points have been supplied than necessary for #H definition - excess points have been ignored 64,533 - Point is co-linear with previous points 64,534 - Diagonal is parallel to side of #H 64,535 - Cannot access point #I of Outline 64,536 - Unable to identify origin of the #H uniquely 64,537 - #F: Cannot get the draughting point position 64,538 - Distance is zero - cannot calculate attribute #H 64,539 - Unable to copy #I draughting points when copying into #F 64,540 - #F: Fillet radius too large and therefore ignored 64,541 - #F: illegal value for attribute #H 64,542 - Warning - insufficient data to define #H completely 64,543 - #I-d point specified - cannot drag Ppoints and #I-d points. 64,544 - Radius too small - minimum value #R 64,545 - #F is not a draughting primitive 64,546 - #F: System error - Draughting point #I may be corrupt - count #I 64,547 - #F: Invalid command when Tcode is #H 64,548 - #F: SNAP multiple for Visible grid increased to #I 64,550 - Point stack overflow 64,551 - No valid intersection points 64,552 - Point lies inside arc, circle or ellipse 64,553 - No valid tangency points 64,554 - Infinite circle 64,555 - Point lies at centre of ARC or CIRCLE 64,556 - No valid perpendicular intersection point 64,557 - The #H identified is insufficiently defined 64,558 - Undefined quadrant point for this arc 64,559 - Pick a Line, Arc, Circle or Ellipse 64,560 - This command is not valid at the first #H element 64,561 - Cannot create Fillet Arc 64,562 - Cannot create Tangent Line 64,563 - Cannot create Chamfer Line 64,564 - Cannot perform Curve Fit 64,565 - Cannot Rotate Current Element 64,566 - Cannot Mirror Current Element 64,567 - Cannot create Bisector Line 64,568 - Too many collinear spans; cannot perform Curve Fit 64,569 - Warning - only the first 200 spans have been curve fitted; the rest have been joined as defined in the database 64,570 - Warning: Fillet radius too large and therefore not shown 64,571 - Warning: Chamfer too large to be shown 64,572 - Pick an Arc or Circle 64,573 - Pick a Line 64,580 - No Design Change Rules referenced 64,581 - No DCRule applicable to #F found - changes will not be marked 64,582 - The default Change Style applies to #F 64,583 - No Layer rules referenced - the default AutoCAD Layer will be used for all elements 64,584 - No Layer Rule applicable to #F found - default AutoCAD Layer will be used 64,585 - #F applies to #F - AutoCAD Layer #N will be used 64,597 - Message 597 64,598 - Message 598 64,599 - Configuration Dataset #N not defined 64,600 - Loadable Image error: #N 64,601 - Illegal value for attribute ORIN - values are NONE FLOW REDU FLAN 64,602 - Illegal value for STRA attribute PURP - values are LINE INSU TRAC 64,603 - Illegal value for MRKP attribute PURP - values are ARRI LEAV TEE SPIN 64,604 - Illegal value for SYLB attribute PURP - value is ISOD 64,605 - Cannot redefine style for isodraw symbols 64,606 - There is no Symbols File open 64,607 - No symbols exist in Symbols File #N 64,608 - Cannot create Symbols File #N (#N) 64,609 - #N already exists in Symbols File #N 64,610 - #F is not an Isodraw symbol 64,611 - The SKEY or BKEY attribute must be set before adding to the Symbols File 64,612 - #N does not exist in Symbols File #N 64,613 - Isodraw Symbols File #N contains the following symbols 64,614 - Skey #N 64,615 - Bkey #N 64,616 - #N is not a DRAFT Symbols File 64,617 - Symbolkey #N is not a standard symbol 64,618 - Cannot create #H for user defined symbols 64,619 - A marker already exists of type #N 64,620 - Warning - The current attribute contains a null straight 64,621 - Symbol number #I does not exist in Symbols File #N 64,630 - No available sides. Label spreading aborted. 64,631 - Warning: no valid labels found to spread 64,650 - #H is not a valid #H element type 64,651 - Association Table entries are not in increasing order 64,652 - Association Table entry not found for #H 64,654 - #F: Cannot find macro file #N 64,655 - Member(s) of the element have been locked by Final Designer (or are Proxy elements) 64,656 - Element is locked by Final Designer (or is a Proxy element) 64,657 - Unable to set #H to a TXTM when TMDWG is set 64,658 - Unable to set #H as TMRF is a TXTM 64,659 - Final Designer Interface has not loaded 64,660 - Export of #F to Final Designer failed - #N 64,661 - Incorrect ACPICT setting for Current element for this command 64,662 - Cannot display #F in an 2d VIEW - this is a Final Designer sheet 64,663 - Cannot display #F in Final Designer - picture needs converting to Final Designer 64,664 - Cannot display #F in Final Designer - wrong type of picture 64,665 - Failed to load #F into Final Designer - #N 64,666 - Illegal character in Final Designer name 64,667 - Undefined variable #N for Final Designer Drawing #F 64,668 - Unable to update PDMS References in PDMS DWG #N 64,669 - Cannot access Final Designer#N 64,670 - Cannot save/quit PDMS DWG 64,671 - Cannot load PDMS DWG 64,672 - Cannot switch PDMS DWG to write 64,673 - Cannot delete from PDMS DWG 64,674 - Cannot refresh OLAYs in loaded PDMS DWG 64,675 - Cannot create PDMS DWG from XML 64,676 - Unexpected XML error 64,677 - Project DWG folder (or sub-folder #N) not found 64,678 - #F has already been exported to Final Designer. You need to change ACEXPO to allow REEXPORT. 64,679 - #F has not been exported to Final Designer - cannot rebuild PDMSDWG file 64,680 - Cannot rebuild PDMSDWG for #F - file #N already exists 64,681 - Cannot open PDMSDWG for #F - file #N does not exist (#N). You may need to rebuild it using UPDATE PDMSDWG 64,682 - Cannot open PDMSDWG for #F - previous Open failed for #N or Folder is readonly 64,683 - This command is not available for Sheets exported to Final Designer 64,684 - Database has changed. Please SAVEWORK and try again 64,685 - Cannot close PDMS DWG 64,686 - This command is only available for Final Designer Sheets 64,687 - #F has already been exported to Final Designer 64,688 - #F can only be opened Read-only in Final Designer. #N 64,689 - Warning: #F opened as Read-only in Final Designer. Modifications will not be saved. #N 64,690 - Warning: #F opened as Read-only in Final Designer. Final Designer modifications will be not be saved unless it... 64,691 - Only 1 LAYDEF with ACLAYE #N is allowed per LAYTBL 64,692 - Warning: ACPICT set to ON. Modifications to Final Designer PDMSSheet #F will not be displayed in DRAFT 64,693 - #F is not open in Final Designer. 64,694 - Cannot create Model Drawing for #F 64,695 - Export of #F to Final Designer failed - neither ACNAME nor NAME is set 64,696 - Export of #I #H(s) to Final Designer failed - neither ACNAME nor NAME is set 64,697 - Cannot find Model Drawing for #F - file #N does not exist 64,698 - Export of #F to Final Designer failed - attribute LAYDRF and/or LAYARF invalid 64,699 - Cannot create Model Drawing for #F. Please DWGCLOSE first (you may also need to SAVEWORK) 64,700 - Cannot find specified PLLB 64,701 - Cannot create section plane 64,702 - Can only define points for section plane in an orthogonal view 64,711 - Creating Model Drawing for open Final Designer OVER. Please SAVEWORK before making further changes to #F 64,712 - #F is already open in Final Designer - cannot open READONLY 64,713 - it is already open in FD 64,714 - #F is locked by Final Designer. Copy of element will not contain Final Designer changes 64,715 - Cannot display #F in Final Designer - referenced OVER not found in MDB 64,716 - System error - unable to get sheet Splash token for #F ************************************************************************************** 66 - DRAFT QUERY ************************************************************************************** 66,1 - Current label application status: 66,2 - Applying 66,3 - of type 66,4 - with no text 66,5 - with text: 66,6 - copying from label 66,7 - of 66,8 - invalid 66,9 - Current element is not a label 66,10 - General label 66,11 - Special label 66,12 - with symbolic template 66,13 - with text template 66,14 - Projected position of point annotated 66,15 - P 66,16 - Truelength 66,17 - VDM 66,18 - Regn 66,19 - Perspective 66,20 - Only 66,21 - from x #R y #R 66,22 - to x #R y #R 66,23 - Mess 23 66,24 - Mess 24 66,25 - Message 25 66,26 - Message 26 66,27 - proportion #R 66,28 - Message 28 66,29 - Pkey 66,30 - Leaderline straight 66,31 - Leaderline bent 66,32 - Leaderline #R degrees horizontal 66,33 - Leaderline #R degrees vertical 66,34 - Leaderline horizontal #R degrees 66,35 - Leaderline vertical #R degrees 66,36 - Pcentre 66,37 - Pcircumference 66,38 - Autoblanking 66,51 - *** RULE NOT PROPERLY DEFINED *** 66,52 - Vgrid #F 66,53 - Vgrid Snap #I 66,54 - Snap On at 66,55 - Snap Off at 66,56 - spacing 66,90 - Devpen #I #N 66,91 - Plotpen #I #N 66,100 - Fpt 66,101 - Tpt 66,102 - Mpt 66,103 - Fpt 66,104 - Tpt 66,105 - Cpt 66,106 - Thpt 66,107 - Common draughting primitives: 66,111 - Span straight 66,112 - Span radius 66,113 - Span asubtended 66,114 - Major 66,120 - Pcoption 66,121 - Twodhit 66,122 - Endof 66,123 - Centreof 66,124 - Midof 66,125 - Midbetween 66,126 - Intat 66,127 - Intbetween 66,128 - Repeat 66,129 - Nearest 66,130 - Tangent 66,131 - Xcoordof 66,132 - Ycoordof 66,142 - Setfeedback ppoints 66,143 - Ppoints 66,144 - Significant 66,145 - Primitives 66,146 - Tquality 66,147 - Basic 66,148 - Character 66,149 - Exact 66,150 - Setpen 66,151 - Colour 66,152 - Style 66,153 - DevColour 66,154 - DevLine 66,155 - DevMark 66,156 - DevFill 66,157 - PlotColour 66,158 - PlotLine 66,159 - PlotMark 66,160 - PlotFill 66,161 - Linetype 66,162 - Marktype 66,163 - Devpen 66,164 - Plotpen 66,166 - Width 66,167 - Solid 66,168 - Dashed 66,169 - Dotted 66,170 - Chained 66,171 - Ldashed 66,172 - Ddotted 66,173 - Dchained 66,174 - Scale 66,175 - Dot 66,176 - Plus 66,177 - Star 66,178 - Ring 66,179 - Cross 66,180 - Hollow 66,181 - Solid 66,182 - Pattern 66,183 - Hatch 66,184 - Empty 66,185 - Thin 66,186 - Thick 66,201 - Tag 66,202 - Template 66,203 - Last 66,204 - All 66,205 - Absolute 66,206 - Clockwise 66,207 - Anticlockwise 66,208 - Message 208 66,209 - Towards 66,210 - Away 66,211 - Standard 66,212 - Reversed 66,213 - Wireline 66,214 - MWireline 66,215 - Local Hline 66,216 - Global Hline 66,217 - Universal Hline 66,221 - Omit 66,222 - Offset 66,223 - On 66,224 - Off 66,225 - Message 225 66,226 - Nlpen 66,227 - Dimension points 66,228 - mm 66,229 - Use 66,230 - Local Rules 66,231 - Before 66,232 - After 66,233 - Midpoint 66,234 - Arrows 66,235 - Dots 66,236 - Obliques 66,237 - Unchanged 66,238 - Pkey 66,239 - Endpoint 66,240 - Left 66,241 - Centre 66,242 - Right 66,243 - Topleft 66,244 - Topright 66,245 - Bottomright 66,246 - Bottomleft 66,247 - Base 66,248 - Tbody 66,249 - Bbody 66,250 - Hbody 66,251 - Hheight 66,252 - Horizontal 66,253 - Vertical 66,254 - unset 66,255 - not found 66,256 - Straight 66,257 - Bent 66,258 - Nominal 66,259 - Actual 66,260 - Up 66,261 - Down 66,262 - Finch 66,263 - Finch USA 66,264 - Inch 66,265 - Dlpen 66,266 - Dtpen 66,267 - Plpen 66,268 - Ptpen 66,269 - Llpen 66,270 - Lfpen 66,271 - Bfpen 66,272 - Clpen 66,273 - Ffpen 66,274 - Obpen 66,275 - None 66,276 - No rules defined 66,277 - Line 66,278 - Angled Horizontal 66,279 - Angled Vertical 66,280 - Horizontal Angled 66,281 - Vertical Angled 66,282 - Percent 66,283 - Justification 66,284 - Alignment 66,285 - Viewdirection 66,286 - Dimline 66,287 - Leaderline 66,288 - Frontface 66,289 - Backface 66,290 - Centreline 66,291 - Obscured 66,292 - Expanded 66,293 - Default 66,294 - Leftside 66,295 - Rightside 66,296 - Topside 66,297 - Bottomside 66,298 - Apex 66,299 - Focus 66,300 - Circumference 66,301 - Extent of #H 66,302 - Inch USA 66,303 - Inch PDMS 66,304 - Metre 66,305 - Cubicfit 66,306 - Radius 66,307 - Diameter 66,308 - External 66,309 - Parallel 66,310 - Projlineonly 66,311 - Dimlineonly 66,312 - Flipped 66,313 - Dimension 66,314 - Omit Fractional Pcomponents 66,315 - Inside 66,316 - Outside 66,317 - cm 66,318 - mms to #I dpls 66,319 - Inches to #I dpls 66,320 - Fractions to #I ths 66,321 - Angles to #I dpls 66,322 - Angles to degrees 66,323 - Angles to minutes 66,324 - Angles to seconds 66,325 - SectionedFaces 66,326 - PrimitiveFaces 66,327 - AllDirections 66,328 - PerpendicularDirection 66,329 - SpecifiedDirection 66,330 - DDMMYYYY 66,331 - DDMMYY 66,332 - MMDDYYYY 66,333 - MMDDYY 66,334 - DDMONYYYY 66,335 - DDMONYY 66,336 - ChangedAnno 66,337 - AddedAnno 66,338 - Changed and AddedAnno 66,339 - Round 66,340 - Curly 66,341 - Square 66,342 - Angle 66,560 - Message 560 66,561 - Message 561 ************************************************************************************** 68 - PDMS messages for LEXICON ************************************************************************************** 68,2 - Read only DB 68,3 - The REFLIST ADD command is only valid for a REFERENCE UDA 68,4 - WORLD elements may not have UDAs 68,5 - The element #H is already in the ELELIST 68,6 - The element #H is not in the ELELIST 68,7 - The element #H is already in the REFLIST 68,8 - The element #H is not in the REFLIST 68,9 - The current element type is not a UDA definition. 68,10 - The ELELIST may only be 100 long. 68,11 - The REFLIST may only be 100 long. 68,12 - Maximum ABLEN is 12 characters. 68,13 - Maximum UDNAME length is 12 characters. 68,14 - The UDNAME may not contain a space 68,15 - The UDNAME may not contain a carriage return 68,16 - The ULEN must be between 1 and 120 68,17 - The UKEY is set by the system , and may not be set by the user 68,18 - WARNING- The UDA definition is not REAL or INTEGER 68,19 - WARNING- The default will only be used if the ULEN is set to 1 68,20 - WARNING- The units will only be used if the UDA type is set to REAL or INTEGER 68,21 - WARNING- ABLEN is greater than the length of UDNAME 68,22 - WARNING- The length of UDNAME is less than ABLEN 68,23 - WARNING- The UDA definition is not a REF type 68,24 - WARNING- The UDA definition is not a LOGICAL type 68,25 - This command is restricted 68,26 - Users may not move to an instance of element type '#H'. 68,27 - No valid keys remain for new UDA. Please compile dictionary and try again 68,28 - WARNING- The UDA definition is not a TEXT type 68,29 - WARNING- The UDA definition is not a WORD type 68,30 - WARNING- the units text has been truncated to 20 long 68,31 - WARNING- BORE and DISTANCE units are only valid for REAL UDAs 68,32 - KEYCOPY only allowed on elements of type UDA 68,33 - May not KEYCOPY a UDA to itself 68,51 - System error- no LOOKUP world 68,52 - System error- no DB entry found on system DB 68,53 - System error- no available keys to assign- Try deleting or COMPILING some LEXICON DBs 68,61 - Maximum number of definitions (#I) in dictionary db #N has been exceeded.#F has been ignored 68,62 - Two UDAs with different keys have the same name #N. The second definition will be ignored. 68,63 - Two UDAs have the same first four characters in their name. The second definition #N will be ignored 68,64 - Two UDAs with the same name (#N) have the same element (#H) in their ELELISTs. Second UDA definition ignored. 68,65 - Unable to calculate unique UKEY for #F. Please rename using different first 4 characters 68,66 - An attempt has been made to assign more UDAs than the maximum limit of 100 to a single element type. 68,67 - WARNING for #F. The default is not applicable as the ULEN is greater than 1. 68,68 - WARNING for #F. The default type does not correspond to the UDA type. The default has been ignored 68,69 - WARNING for #F. The UUNIT attribute is not applicable unless a REAL or INTEGER type. It has been ignored. 68,70 - WARNING for #F. The REFL attribute is not applicable unless a REF type. It has been ignored 68,71 - #F has no name and has been ignored. 68,72 - #F has no element list and has been ignored. 68,73 - WARNING for #F. The ABLEN given is longer than the UDNAME. A value of #I for ABLEN has been assumed 68,74 - Element type #H has more than #I UDAs assigned to it. Subsequent UDAs have been lost. 68,75 - The maximum number of definitions (#I) has been exceeded for dictionaries in the MDB. Dictionary #N has been ignored 68,76 - WARNING for #F. BORE, DISTANCE units are only applicable if a REAL UDA type. The units have been ignored. 68,77 - #F has no Type set and has been ignored 68,78 - WARNING for #F. POS type UDAs must have DISTANCE units. DIST units assumed 68,79 - WARNING for #F. POS,DIR,ORI types must have length of 1. Length of one assumed 68,80 - System Error. Please contact customer support. 68,81 - No tables exist for dictionary 68,82 - Table 1 incomplete 68,83 - Table 2 incomplete 68,101 - UDA definition #N is of type #H, with minimum abbreviation length of #I 68,102 - #I definitions exist as follows:- 68,103 - The default is #N 68,104 - The valid element types for this attribute are 68,105 - The units of measurement are in #N units 68,106 - Valid element types which may be referenced are 68,107 - For element types 68,108 - , the default is #N 68,109 - , the valid reference types are 68,110 - Definition deleted from the dictionary 68,111 - All element types may be referenced 68,112 - No default value 68,113 - The UDA length is #I 68,114 - , there is no default value. 68,115 - , the UDA length is #I 68,116 - The units of measurement are in #N units 68,120 - Maximum number of uda definitions (#I) in mdb has been exceeded.UDA #F has been ignored 68,121 - Maximum number of uda definitions (#I) in mdb has been exceeded. 68,122 - Element type #H has more than #I UDAs from dictionary db #N assigned to it.Subsequent UDAs from this dicti... ************************************************************************************** 69 - PDMS messages for CLASH10 ************************************************************************************** 69,1 - This command is not available 69,2 - Illegal reference number 69,3 - Invalid name 69,4 - May only specify tube on piping or hanger components 69,5 - Must be a BRANCH or HANGER to specify HEAD or TAIL tube 69,6 - #F is an invalid element type 69,7 - #F has no valid geometry for Clashing purposes 69,8 - #F is already in the obstruction list 69,9 - #F is not in the spatial map 69,10 - Volumetric box for #F is 69,11 - #F is not in the obstruction list 69,12 - Approved clash number #I is not in approval list 69,13 - Element type #H is not currently a section header 69,14 - All items in spatial map are considered to be obstructions 69,15 - The items in the obstruction list are:- 69,16 - Maximum number of element types for the NOCHECK option exceeded 69,17 - Element type #H is not in the list of those set for NOCHECK 69,18 - Clearance value must be positive 69,19 - Clearance value must be greater than Touching gap 69,20 - touching gap must be positive 69,21 - touching gap may not be greater than current clearance 69,22 - touching overlap must be positive 69,23 - Invalid element type for an approved clash 69,24 - #F with #F approved clash already exists 69,25 - #I is not a valid approved clash number 69,26 - There are no items in the obstruction list 69,27 - Maximum number of element types for the SECT option exceeded 69,28 - Clashes cannot be saved as no clash run has been made. 69,29 - Error in file format 69,30 - Clashes restored 69,31 - Approved Clashes restored 69,32 - Setup restored 69,33 - No clash run has been made 69,34 - File #N already exists. Output defaulted to terminal 69,35 - File #N is in use. Output defaulted to terminal 69,36 - File #N does not exist 69,37 - File #N already exists 69,38 - File #N is in use 69,39 - 69,40 - 69,41 - 69,42 - Invalid references read in 69,43 - No spatial map exists for DB #N 69,44 - Faceting error between #F and #F 69,45 - Volumetric box for leave tube of #F is 69,46 - Volumetric box for head tube of #F is 69,47 - The leave tube for #F is not in the spatial map 69,48 - No approved clashes exist between #F and #F 69,49 - Volumetric box is 69,50 - 69,51 - 69,52 - 69,53 - 69,54 - 69,55 - 69,56 - Unable to open file #N #N 69,57 - Line #I of macro template #N is too long 69,58 - Line #I of macro template #N does not have matching dollar signs 69,59 - Line #I of macro template #N has unrecognised keyword 69,60 - Macro template #N has no keywords 69,61 - 69,62 - Box dimension for item #F is out of range of spatial map 69,63 - Element #F has no valid reference to catalogue 69,64 - Maximum number of 20 error messages exceeded- error messages curtailed 69,65 - Checking #F 69,66 - No obstruction list. Use 'OBS ALL' or 'OBS id1 id2 ..... idn'. 69,67 - Currently OBS ALL. Specifying additional obstructions has no effect. 69,68 - No template file has been specified for macro output 69,69 - Entry for element #I/#I removed from the map 69,70 - Maximum number of 50 messages exceeded- messages curtailed 69,71 - 69,72 - The leave tube for #F is incorrectly mapped 69,73 - The leave tube for #F is missing from the spatial map 69,74 - #F is incorrectly mapped 69,75 - #F is missing from the spatial map 69,76 - Maximum of 100 messages exceeded, messages curtailed 69,77 - Total of #I discrepancies in the spatial map for DB #N 69,78 - Groups/assemblies may not be used in MAP BUILD/CHECK commands 69,79 - ALL not valid for EXCLUDE command 69,80 - #F is already in the exclusion list 69,81 - #F is not in the exclusion list 69,82 - The MAP BUILD command should be issued to ensure that the spatial mapis complete 69,83 - Map build finished 69,84 - Map check finished 69,85 - Clasher run may not be made unless the override option is used 69,86 - Error in maplist- Reference not found (contact system support) 69,87 - The DB #N does not exist in the current MDB 69,88 - The DB name given is too long 69,89 - Map update finished 69,91 - Building map for DB #N 69,92 - Checking map for DB #N 69,93 - Map ensure finished 69,94 - Updating map for DB #N 69,95 - Ensuring map for DB #N 69,96 - REPORT MACRO option switched OFF 69,97 - Cannot build map for DB #N - Read only Database 69,98 - Catalogue database #N has not been upgraded. MAP UPDATE/ENSURE cannot be used 69,99 - Design database #N has not been upgraded. MAP UPDATE/ENSURE cannot be used on this database. 69,100 - Catalogue error found on item #F when updating spatial map 69,101 - DB #N. A catalogue DB has been changed since the last MAP BUILD. The MAP BUILD command should be issued to en... 69,102 - DB #N. Spatial map uptodate 69,104 - Elements in 3D window 69,105 - Using MAP BUILD for DB #N as predicted to be faster 69,106 - Using MAP CHECK for DB #N as predicted to be faster 69,110 - 69,111 - Clash number #I cannot be found. 69,112 - The leave tube for #F is inefficiently mapped 69,113 - #F is inefficiently mapped 69,114 - DB #N. Database contains incorrectly mapped elements due to changes to catalogue DB. The MAP BUILD command sh... 69,115 - DB #N. Database may contain incorrectly mapped elements due to changes to catalogue DB. The MAP BUILD command... 69,116 - DB #N. Database contains inefficiently mapped elements due to changes to catalogue DB. The MAP BUILD command ... 69,117 - DB #N. Unable to UPDATE map as one or more session required no longer exist. Using MAP BUILD instead. 69,118 - DB #N. Unable to ENSURE map as one or more session required no longer exist. Using MAP CHECK instead. 69,119 - DB #N. Unable to automatically update map as one or more catalogue databases have not been upgraded. Please u... 69,120 - One or more design databases may contain incorrectly mapped elements due to changes to catalogue DB. Use MAP U... 69,121 - DB #N. Database may contain unchecked spatial map entries due to extract operations ************************************************************************************** 73 - Messages for Structural PDMS ************************************************************************************** 73,1 - Unable to set position 73,2 - Unable to set direction 73,3 - Wrong element type 73,4 - Current element has no owning Structure 73,5 - Section has zero length 73,6 - Unable to access or error in accessing data for #F 73,7 - Unable to orientate #F 73,8 - Illegal Plaxis attribute 73,9 - Pline #H does not exist 73,10 - Absolute position 73,11 - Relative position 73,12 - Error in Structural geometry. 73,13 - Eccentricity 73,14 - Maximum number of levels of connectivity reached. 73,15 - Maximum number of elements reached. 73,16 - Hierarchy 73,17 - Depth 73,18 - Width 73,19 - Value out of range. 73,20 - Secondary connection references incompatible... left unchanged 73,21 - Error in Assembly membership Tables for #F 73,22 - Links 73,23 - Syntax not allowed for non Joints. 73,24 - Invalid positioning operation for a #H 73,25 - Unable to connect #H 73,26 - Reconnect not allowed at ASSE level 73,27 - Cut length 73,28 - Syntax not allowed for non Fittings. 73,29 - Npoint attached 73,30 - Npoint owning 73,31 - No span associated with vertex #F 73,32 - Cannot SPLIT a #H 73,33 - SPLIT ON only allowed for SCTNs 73,34 - ERROR - Splitting panels with fillets not yet supported 73,35 - Significant element must be CLAIMed before database can be updated 73,36 - WARNING - Panel #F contains duplicate vertices 73,37 - YDIR is same direction as first SPINE segment 73,38 - Missing POINSP between CURVEs 73,39 - Profile crosses axis of solid of revolution 73,40 - WARNING - Profile touches axis of solid of revolution 73,41 - Could not create GML profile from catalogue 73,42 - Could not mitre GENSEC (Angle too acute?) 73,101 - Error initialising Assembly tables 73,102 - Too many NOUNs in Assembly list 73,103 - #H not allowed in Assemblies 73,104 - Too many IDs in Assembly list 73,105 - Attempting to add Assemblies to Assemblies 73,106 - Assembly #F and element #F are not in the same STRUCTURE 73,107 - Attention! Assembly tables for #F 73,108 - Syntax not permissible while at a #H 73,109 - - duplicate items removed on adding to tables or trying to remove items not already in tables 73,110 - - cannot get the Assembly list for the element 73,111 - - illegal Assembly table type 73,201 - Structural geometry error - parallel vectors 73,202 - Structural geometry error - vector parallel to plane 73,203 - Structural geometry error - parallel planes 73,204 - Structural geometry error - parallel directions 73,205 - Structural geometry error - no attached Section 73,206 - Structural geometry error - no attached Section 73,207 - Structural geometry error - zero Force vector 73,208 - Structural geometry error - Plines have different owners 73,209 - Structural geometry error - parameters in Common 73,210 - Structural geometry error - wrong element type 73,211 - Structural geometry error - unable to access data 73,212 - Structural geometry error - illegal Pline direction 73,213 - Structural geometry error - illegal Pline attribute 73,214 - Structural geometry error - zero length Section 73,215 - Structural geometry error - zero length vector 73,216 - Structural geometry error - Cannot get transformation matrix 73,217 - Structural geometry error - JOIS reference invalid 73,218 - Structural geometry error - JOIE reference invalid 73,300 - Error initialising linear joint cross reference tables 73,301 - Too many vertex IDs in list 73,302 - Specified ID #F is not a vertex 73,303 - Too many edges in list 73,304 - Specified ID #F is not a panel 73,305 - Specified ID #F is not a linear joint 73,306 - Joint #F does not own vertex #F 73,307 - Panel #F does not own vertex #F 73,308 - Cannot delete vertex created during aborted LINK operation 73,309 - Cannot link a panel edge to a panel 73,310 - Cannot link a linear joint edge to a panel edge 73,311 - Cannot link a linear joint vertex to a panel 73,312 - Cannot link a linear joint vertex to a panel vertex 73,313 - Cannot break a link made during aborted LINK operation 73,314 - Cannot create link broken during aborted LINK operation 73,315 - Master panel/section vertex #F has no master: cannot link 73,316 - Master vertex of master #F shares owning panel #F with slave: cannot link 73,317 - Panel #F owns linear joint #F: cannot link 73,318 - Master vertex of specified master owns specified slave: cannot link 73,319 - Cannot create the PLOO for the panel. 73,320 - Element type is not suitable for unlinking 73,321 - Vertices #F and #F do not form an edge 73,322 - Unable to set position of vertex #F to that of vertex #F 73,323 - Cannot link vertex #F and vertex #F: same owning PANE 73,324 - Cannot link edges: same owning PANE 73,325 - Cannot link vertex #F and vertex #F: common linear joint 73,326 - Cannot link panel to edge: edge is owned by panel. 73,327 - Failure creating vertex in panel during link operation. 73,330 - Linear joint link error: invalid link type code 73,331 - Linear joint link error: invalid action number 73,332 - Linear joint link error: invalid action number for RECLNK 73,333 - Linear joint link error: invalid action number for RECULK 73,334 - Linear joint link error: invalid action number for RECVER 73,335 - Linear joint link error: CRELNK element list - XREF mismatch 73,336 - Linear joint link error: invalid edge link to type 73,337 - Linear joint link error: unable to unlink vertex during deletion 73,400 - Linear joint reconnect sys error: invalid element #F supplied 73,401 - #F connected to master #F ************************************************************************************** 74 - GTSTRUDL INTERFACE MESSAGE FILE ************************************************************************************** 74,1 - Illegal Action Number in Graph 74,3 - Maximum number of allowed start id's exceeded 74,4 - Unable to allocate file 74,5 - Structure axes in use 74,6 - TRANSLATE 74,7 - INCLUDING 74,8 - JOINT 74,9 - MEMBER 74,10 - LOADS 74,11 - DISPLACEMENTS 74,12 - RELEASES 74,13 - SECTION 74,14 - MATERIAL 74,15 - PROPERTIES 74,16 - No Transformation Information has been given 74,17 - AXES 74,18 - FORMAT 74,19 - GTSTRUDL 74,20 - NEUTRAL 74,21 - No Database to work from 74,22 - ANALYSIS TYPE 74,23 - LINEAR 74,24 - NONLINEAR 74,25 - DYNAMIC 74,26 - TITLE 74,27 - No title has been supplied 74,28 - Invalid element type for translation 74,29 - ANALYSE 74,30 - BY 74,31 - NAME 74,32 - REFNO 74,33 - SEQUENCE 74,34 - List of start ID's for translation not yet supplied 74,35 - COORDINATES 74,36 - INCIDENCES 74,37 - USER 74,38 - DATE 74,39 - TIME 74,40 - END 74,41 - =#I/#I 74,42 - Type Table for Assemblies not found. All Assemblies removed from ID list 74,43 - C 74,44 - Element list for Assembly #F does not exist 74,45 - No blocks of data exist for Assembly #F 74,46 - Maximum no. of #I start ID's exceeded, resubmit ID list 74,47 - ECCENTRICITIES 74,48 - END JOINT SIZES 74,49 - INCHES 74,50 - FEET 74,51 - CENTIMETRES 74,52 - METRES 74,53 - MILLIMETRES 74,54 - POUNDS 74,55 - KIPS 74,56 - TONS 74,57 - MTONS 74,58 - TONNES 74,59 - KILOGRAMS 74,60 - NEWTONS 74,61 - GRAMS 74,62 - KILONEWTONS 74,63 - RADIANS 74,64 - DEGREES 74,65 - CYCLES 74,66 - FAHRENHEIT 74,67 - CENTIGRADE 74,68 - CELSIUS 74,69 - KELVIN 74,70 - SECONDS 74,71 - MINUTES 74,72 - HOURS 74,73 - UNITS 74,74 - SAUNITS 74,75 - LENGTH 74,76 - FORCE 74,77 - Limit on number of user defined TRANS quantities exceeded ************************************************************************************** 75 - Visualisation ************************************************************************************** 75,1 - on 75,2 - off 75,3 - high 75,4 - low 75,11 - Draw-list 75,12 - Add-list 75,13 - Colour #I 75,14 - Remove-list 75,15 - empty 75,16 - solid 75,17 - Level #I 75,18 - is not used 75,19 - owned by 75,20 - owned by #F 75,32 - W 75,33 - S 75,34 - E 75,35 - N 75,36 - D 75,37 - U 75,41 - Nozzles 75,42 - Substructures 75,43 - Equipments 75,44 - Branches 75,45 - Restraints 75,46 - Structures 75,52 - Datums file not specified 75,53 - Using #N transfer files 75,54 - Using #N datums file 75,55 - Using #N transfer files (in read-only mode) 75,56 - Scratch attributes file contains no attributes 75,57 - Arc tolerance must lie in the range #R to #R 75,58 - No default database 75,59 - No databases to work from 75,60 - Transfer files not specified 75,61 - Transfer files do not exist 75,62 - Group has no list part - unable to draw 75,63 - No databases to draw from 75,64 - Undefined element ID - line truncated 75,65 - Maximum drawlist size exceeded 75,66 - (#I/#I) 75,67 - Remove item not owned by any item in add-list 75,68 - Item already in remove list 75,69 - Maximum number of remove items exceeded 75,70 - Hole tolerance must lie in the range #R to #R 75,71 - Transfer files opened in read-only mode 75,72 - File already exists (use OVERWRITE option) 75,74 - Insulation parameters not available 75,75 - Transfer files revision number (#I) is obsolete: Current number (#I). 75,76 - Attempt to draw invalid item 75,77 - Unknown type in symbol or geometry 75,78 - Unable to retrieve facet data 75,79 - Element #F detected with NULL direction 75,80 - Not a current primitives file 75,81 - Not a current attributes file 75,82 - Not a current datums file 75,83 - Not enough room for all points in object 75,84 - Unable to model #F (GML error #I) 75,85 - Not enough room to construct POGON 75,86 - Not enough room to construct POHED or GRMOD 75,87 - Error: file copy failed 75,88 - Begin - level #I 75,89 - End - level #I 75,90 - Illegally defined hole / ref. omitted 75,91 - : version number incorrect 75,92 - File exists - previous contents will be destroyed 75,94 - #I #I 75,95 - Negative catalogue primitives not supported. See export command in Design 75,96 - Extrusions (+ve & -ve) are not supported. See export command in Design 75,101 - 75,102 - #R 75,103 - #I 75,104 - #F 75,105 - 75,106 - #N 75,107 - File not found 75,108 - Attributes buffer size exceeded 75,111 - #I primitives, #I attributes 75,112 - #Rs CPU time used 75,115 - No colour list exists for querying 75,116 - No current Selection list 75,117 - File not selected for SAVE option 75,118 - File already exists 75,120 - Error in regeneration of Select list in text form 75,121 - Error in verifying whether element belongs to list 75,122 - Error opening Select file 75,123 - Error closing Select file 75,124 - File does not exist 75,125 - SELECT COLOUR #I FOR #N 75,130 - Error : In execution of SLPREP command 75,131 - Error : In execution of LSLVER command 75,132 - Level #I 75,133 - Arc tolerance #R 75,134 - Hole tolerance #R 75,135 - Holes 75,136 - Obstruction 75,137 - Insulation 75,138 - Tube 75,139 - Centreline 75,140 - Frmworks 75,141 - Sbfrmworks 75,142 - Profile 75,143 - Not enough room to construct SREC 75,144 - Not enough room to construct SANN 75,145 - Cannot determine axes for an assembly 75,146 - INTERNAL ERROR: attribute file may be corrupted. Generate an attribute 75,147 - file, and keep it for examination by AVEVA. Then restart EVSDB. 75,148 - Attribute file version 4: not all database names may be shown (PUREVS001) 75,149 - Usage restricted -- You cannot use EXTRACT, contact AVEVA Ltd 75,150 - Cannot Module Switch from here -- Use "EXIT" to go back to main graphs 75,151 - Output file already exists 75,152 - PDMS name is not in the list of valid elements to process 75,153 - Can not access PDMS element 75,154 - Elements below a Group belong to different Sites 75,155 - Usage restricted 75,156 - Illegal Trace Value -- Range out of order 75,157 - Mapping Error Number #I 75,158 - #F -- Parameters missing from Catalogue DB 75,159 - Warning: #F -- SPREF/CATREF or GMREF/GSTR not set 75,160 - Warning: #F -- PDMS Catalogue type can not be processed 75,161 - #F -- Can not create a geometry 75,162 - #F -- PDMS Catalogue Component does not exist 75,163 - #F -- Wrong Element Type found 75,164 - #F -- Can not get Transformation Matrix 75,165 - Warning: #F -- Number of primitives may not match primitives 75,166 - #F -- Connection Error 75,167 - Incorrect filename: Format FILENAME.DAT (FILENAME between 4 and 14 characters) 75,168 - APPE/ND not for general use 75,169 - Output filename too long 75,170 - Cannot open output file 75,171 - Cannot close output file 75,172 - File is not opened 75,173 - Error number out of range 75,185 - Cannot run IGRIP Program 75,186 - IGRIP program does not exist 75,187 - Special Environment Variable does not exist 75,188 - Unable to open dynamic library #N 75,189 - Error in writing to export file 75,190 - Export driver has not been successfully loaded 75,191 - No licences available for export driver #N 75,192 - Export driver security error: #I 75,193 - Internal driver name does not match command line input 75,194 - Export driver security error 75,301 - ISFF file format not available 75,302 - library does not accept this hardware 75,303 - iogini has not been called 75,304 - file does not exist 75,305 - cannot open file 75,306 - there is no ISFF file open 75,307 - cannot close the file 75,308 - end of file found 75,309 - insufficient space provided 75,310 - 2D request on 3D file 75,311 - 3D request on 2D file 75,312 - type does not exist 75,313 - type is invalid for query routine 75,314 - invalid level in type 9 75,315 - invalid dimension 75,316 - error reading IDGSfile 75,317 - invalid exponent in double 75,318 - group not applicable to type 75,319 - attributes not applicable 75,320 - SEED3D_DIR has not been declared 75,321 - Cannot open seed file 75,322 - Cannot open ISFF file 75,399 - Unknown error from IOGL library routine ************************************************************************************** 77 - COMPARATOR ************************************************************************************** 77,1 - System Error 77,2 - No Reference databases current in the MDB 77,3 - Reference Databases 77,4 - Revision note not available 77,5 - Details of Reference Database 77,6 - Name : 77,7 - Project : 77,8 - Rev Note : 77,9 - Trans Note : 77,10 - Reference database not found 77,11 - Version : 77,12 - Out Date : 77,13 - Exporter : 77,14 - ERROR - Reference database not found 77,15 - ERROR - #N is not a P&ID sheet 77,16 - ERROR - =#I/#I is not a P&ID sheet 77,17 - No reference database selected 77,18 - Selected reference database : 77,19 - This facility is available only in Design Compare 77,20 - ERROR - Reference database is version #I. Version #I is required. 77,21 - ERROR - Reference database is empty 77,22 - ERROR - Unable to open picture file #N - cannot display P&ID 77,51 - Illegal syntax while CM connected 77,100 - Success 77,101 - File inaccessible 77,102 - Special string not found where required 77,103 - Wrong type in record 77,104 - Field type in header not recognised 77,105 - Splash element not used by table reader 77,106 - Unexpected End of File 77,107 - Splash element could not be created 77,108 - Character string too long 77,109 - Bad field length 77,110 - Unbalanced parentheses in record 77,111 - Wrong array length in record 77,112 - Brackets are required in record 77,113 - There are no fields in the header 77,114 - Lexeme too long 77,115 - Line in file too long 77,116 - Badly formatted line(s) found in file 77,120 - Compare 77,121 - reference 77,122 - exclude 77,123 - rat 77,124 - from 77,125 - fix 77,126 - tat 77,127 - results 77,128 - query 77,129 - highlight 77,130 - highlight pause 77,131 - highlight noupdates 77,132 - topology 77,133 - missing 77,134 - extraatt 77,135 - reporting 77,136 - summary 77,137 - edit 77,138 - compa 77,139 - put 77,140 - exit 77,150 - No sheets in #N match specified criteria 77,151 - Comparator Results Querying is not enabled 77,152 - Reference attributes 77,153 - Target attributes 77,154 - Pcopy edits 77,155 - Name From Fix 77,156 - ---- ---- --- 77,157 - None 77,158 - Connections 77,159 - Attribute #N not found on current Comparator database element 77,160 - Cannot find P&ID sheet named #N 77,170 - Area 77,171 - Document 77,172 - Sheet 77,173 - Version 77,174 - Title 77,175 - found in the following sheets : 77,176 - Element not found in Comparison results. Has it been compared? 77,179 - Results : 77,180 - Query 77,181 - Highlight 77,182 - Highlight Pause 77,183 - Highlight Noupdate 77,184 - Reference database : 77,185 - Topology check : 77,186 - Missing attribute : 77,187 - Extra attribute : 77,188 - Excluded attributes : 77,189 - Error Reporting : 77,190 - Summary : 77,191 - Full 77,192 - Long 77,193 - Short 77,194 - Sheets available : 77,195 - Sheet attributes : 77,196 - Underlay status : 77,197 - vis 77,198 - hid 77,200 - Current element in Comparator database not set 77,201 - Comparator database has not been specified 77,202 - Error defining Copy Values 77,203 - Current comparator element is not a #H 77,204 - Cannot find a #H called #N 77,205 - Cannot derive a #H attribute from Reference db element #F 77,206 - Spec #N has too great a depth of SELEs for PCHOOSE command 77,210 - Exclude elements : 77,240 - Cannot open Comparator save file 77,241 - No Comparator Results available 77,242 - Saved results are not consistent with current Reference database 77,245 - Do you wish to continue the comparison? 77,250 - Error #I sorting Copy values 77,251 - Error #I getting data from ITATT elements 77,252 - Error #I whilst trying to apply text edit 77,310 - Error #I in sorting the sheets 77,311 - Error #I in sorting the items 77,312 - Error #I in sorting the links 77,313 - Importing Transfer Data #N 77,314 - Comparator database is not empty 77,315 - Database is not a comparator database 77,316 - End of Transfer File #N 77,317 - Cannot find WORLD element in the comparator database 77,318 - Cannot close the comparator database 77,319 - Unable to initialise IMPORT 77,320 - System Database Error #I 77,321 - Line No. #I 77,322 - Development error 77,323 - Wrong table 77,324 - Warning - Unexpected field in header 77,325 - Reading header 77,326 - Wrong field 77,327 - Obligatory field is missing 77,328 - Unexpected end of header table 77,329 - Data in record is invalid 77,330 - Index mechanism problem ERR = #I 77,331 - Name already exists 77,332 - Line does not exist 77,333 - Item does not exist 77,334 - Sheet does not exist 77,335 - Warning - Field #N is too large 77,336 - Warning - Field is being truncated 77,337 - Reading record 77,338 - End of Transfer File #N 77,339 - Comparator database is not empty 77,340 - Reading Header TRANSFER #N 77,341 - Reading Record TRANSFER 77,342 - Wrong Transfer Version Number 77,346 - Reading Header TRANS_SHEETS #N 77,347 - Reading Records TRANS_SHEETS 77,350 - Reading Header LINES #N 77,351 - Reading Records LINES 77,356 - Reading Header ITEMS #N 77,357 - Reading Records ITEMS 77,358 - Number of owned items exceeds the maximum 77,359 - The LINE name specified does not belong to a LINE 77,360 - Reading Header CONNECTIONS #N 77,361 - Reading Records CONNECTIONS 77,362 - Item exists but there is no node 77,363 - There is another element connected already 77,365 - Reading Header LINKS #N 77,366 - Reading Records LINKS 77,367 - Connection has been connected already 77,368 - Connection does not exist 77,369 - The LINE name specified does not belong to a LINE 77,370 - Reading Header ITEM_ATTRIBUTES #N 77,371 - Reading Records ITEM_ATTRIBUTES 77,373 - Reading Header LINE_ATTRIBUTES #N 77,374 - Reading Records LINE_ATTRIBUTES 77,376 - Reading Header ITEMS_TO_PAIDS #N 77,377 - Reading Records ITEMS_TO_PAIDS 77,378 - Reading Header PAID_TO_UNDERLAYS #N 77,379 - Reading Records PAID_TO_UNDERLAYS 77,390 - Cannot open message file #N 77,391 - Cannot open junk file #N 77,392 - Cannot open database file #N 77,393 - Cannot configure the junk file 77,394 - Cannot open the comparator database 77,395 - Cannot close database file #N 77,396 - Cannot delete junk file #N 77,397 - Error in creating the comparator database WORLD element 77,398 - Error in naming the WORLD element 77,399 - Cannot open transfer file #N ************************************************************************************** 78 - SQL interface ************************************************************************************** 78,1 - Cannot initiate inter-process communication: #N. 78,2 - Not connected to data server. 78,3 - Cannot initialise server daemon: #N 78,4 - Cannot terminate server daemon: #N 78,5 - Cannot connect to data server: #N 78,6 - Cannot send request to data server: #N 78,7 - Error returned: #N 78,8 - Request failed: #N 78,9 - Cannot fetch next row: #N 78,10 - #N 78,11 - Data available. 78,12 - Nodename too long. Must be #I characters or less. 78,13 - Username too long. Must be #I characters or less. 78,14 - Password too long. Must be #I characters or less. 78,16 - No username and/or password given. 78,17 - End of data. 78,18 - Command overflow; more than #I characters entered. Buffer cleared. 78,19 - Server not initialised. 78,20 - Delimiter must be a single character. 78,22 - Already connected to data server. 78,23 - Cannot determine server daemon version: #N 78,24 - Unable to toggle tracing in the server daemon: #N 78,25 - Unable to toggle blank compression in the server daemon: #N 78,27 - Host (connect) string too long. Must be #I characters or less. 78,28 - Absent or empty host-string. 78,29 - Server daemon string too long. Must be #I characters or less. 78,52 - Connected to data server. 78,53 - Data server released ************************************************************************************** 79 - Review Query interface ************************************************************************************** 79,1 - Already connected to a database 79,2 - Not logged on (connected) to database 79,3 - Cannot initialise server daemon: #N 79,4 - Cannot connect to data server: #N 79,5 - Cannot send request to data server: #N 79,6 - Error returned: #N 79,7 - Request failed: #N 79,8 - Cannot fetch next row: #N 79,9 - Command is too long 79,10 - No more data 79,51 - Cannot initialise remote process query. 79,52 - Connected to data server 79,53 - Data server released 79,54 - Cannot set delimiter character: #N 79,55 - Cannot terminate server daemon: #N 79,56 - Daemon file incorrect or missing. 79,57 - Unknown daemon synonym: #N 79,58 - Cannot toggle tracing in server daemon: #N 79,59 - No licences available for remote process query. 79,60 - Remote process query security error: #N 79,61 - Truncation of variable name: #N 79,62 - Truncation of text buffer 79,63 - Server daemon has shut down because a FATAL error was detected. 79,100 - Cannot initialise process : #N 79,101 - Environment variable CADC_IPCDIR unset 79,102 - Cannot start communications : #N 79,200 - Cannot communicate with Review until REVIEW CONNECT performed 79,201 - Commands sent automatically as AUTOSEND is enabled 79,202 - Cannot connect to Review : #N 79,203 - Cannot start command transfer to Review : #N 79,204 - No commands to send to Review 79,205 - Cannot send commands to Review : #N 79,206 - Cannot end transfer to Review : #N 79,207 - Cannot start transfer from Review : #N 79,208 - Cannot receive reply from Review : #N 79,209 - Cannot receive the error message from Review : #N 79,210 - No parent Review process 79,211 - Too many commands 79,301 - #N 79,302 - #N 79,303 - #N 79,304 - #N 79,305 - Multiple Review Error : #N 79,306 - #N ************************************************************************************** 80 - Template messages and associated work wrt Advanced Structures ************************************************************************************** 80,1 - CE does not own a PORS 80,2 - PORS does not own PORI %NUMB 80,3 - PORI and target do not share a common owner 80,4 - DPSE does not own design ppoint %PPNU 80,5 - Invalid target reference %TARF ************************************************************************************** 81 - Draft Loadable Image messages ************************************************************************************** 81,1 - Invalid LI Application name 81,2 - LI Application already loaded 81,3 - Unable to Load Application 81,4 - LI System error - Cannot find Application Entry point 81,5 - LI System error - Failed to unload LI Application after Entry point failure 81,6 - LI Application Initialisation failed 81,7 - LI System error - LI Application failed to Check in OK 81,8 - LI System error - LI Application returned Null Application Base pointer 81,9 - LI System error - LI Application Entry function error 81,10 - LI System error - LI Manager failed to create Service Base object 81,20 - LI System error - LI Manager encountered an unexpected error after Check in 81,21 - LI System error - LI Manager encountered an unexpected internal error 81,22 - LI Application error 81,40 - Failed to unload LI Application - not loaded 81,41 - LI List error 81,501 - LI Interface - Database Ref. Invalid 81,502 - LI Interface - Database Ref. Mismatch 81,503 - LI Interface - File Error 81,504 - LI Interface - CPS Invalid 81,505 - LI Interface - Picture File 81,506 - LI Interface - Attribute error 81,507 - LI Interface - Wrong Primitive Type 81,508 - LI Interface - Rendering error 81,509 - LI Interface - Invalid Id Object 81,510 - LI Interface - Database Ref. in Design graphics is inaccessible 81,511 - LI Interface - Design graphics is out of date 81,520 - Unspecified LI Interface error 81,550 - LI Interface - System error 81,551 - LI Interface - Config. Data set not found 81,552 - LI Interface - Database Ref. not found 81,553 - LI Interface - Switch not found 81,554 - LI Interface - Rule not found 81,555 - LI Interface - Text not found 81,599 - #N 81,600 - Loadable Image error: #N ************************************************************************************** 82 - Draft Loadable Image Application messages ************************************************************************************** 82,1 - LI Application error 9001 82,2 - LI Application error 9002 82,3 - LI Application error 9003 82,4 - LI Application error 9004 82,5 - LI Application error 9005 82,6 - LI Application error 9006 82,7 - LI Application error 9007 82,8 - LI Application error 9008 82,9 - LI Application error 9009 82,10 - LI Application error 9010 82,11 - LI Application error 9011 82,12 - LI Application error 9012 82,13 - LI Application error 9013 82,14 - LI Application error 9014 82,15 - LI Application error 9015 82,16 - LI Application error 9016 82,17 - LI Application error 9017 82,18 - LI Application error 9018 82,19 - LI Application error 9019 82,401 - LI Application error 9401 82,402 - LI Application error 9402 82,403 - LI Application error 9403 82,404 - LI Application error 9404 82,405 - LI Application error 9405 82,406 - LI Application error 9406 82,407 - LI Application error 9407 82,408 - LI Application error 9408 82,409 - LI Application error 9409 82,410 - LI Application error 9410 82,411 - LI Application error 9411 82,412 - LI Application error 9412 82,413 - LI Application error 9413 82,414 - LI Application error 9414 82,415 - LI Application error 9415 82,416 - LI Application error 9416 82,417 - LI Application error 9417 82,418 - LI Application error 9418 82,419 - LI Application error 9419 82,420 - LI Application error 9420 82,421 - LI Application error 9421 82,422 - LI Application error 9422 82,423 - LI Application error 9423 82,424 - LI Application error 9424 82,425 - LI Application error 9425 82,426 - LI Application error 9426 82,427 - LI Application error 9427 82,428 - LI Application error 9428 82,429 - LI Application error 9429 82,501 - LI Application Framework error 9501 82,502 - LI Application Framework error 9502 82,503 - LI Application Framework error 9503 82,504 - LI Application Framework error 9504 82,505 - LI Application Framework error 9505 82,506 - LI Application Framework error 9506 82,507 - LI Application Framework error 9507 82,508 - LI Application Framework error 9508 82,509 - LI Application Framework error 9509 82,510 - LI Application Framework error 9510 82,511 - LI Application Framework error 9511 82,512 - LI Application Framework error 9512 82,513 - LI Application Framework error 9513 82,514 - LI Application Framework error 9514 82,515 - LI Application Framework error 9515 82,516 - LI Application Framework error 9516 82,517 - LI Application Framework error 9517 82,518 - LI Application Framework error 9518 82,519 - LI Application Framework error 9519 82,520 - LI Application Framework error 9520 82,521 - LI Application Framework error 9521 82,522 - LI Application Framework error 9522 82,523 - LI Application Framework error 9523 82,524 - LI Application Framework error 9524 82,525 - LI Application Framework error 9525 82,526 - LI Application Framework error 9526 82,527 - LI Application Framework error 9527 82,528 - LI Application Framework error 9528 82,529 - LI Application Framework error 9529 82,530 - LI Application Framework error 9530 82,531 - LI Application Framework error 9531 82,532 - LI Application Framework error 9532 82,533 - LI Application Framework error 9533 82,534 - LI Application Framework error 9534 82,535 - LI Application Framework error 9535 82,536 - LI Application Framework error 9536 82,537 - LI Application Framework error 9537 82,538 - LI Application Framework error 9538 82,539 - LI Application Framework error 9539 82,540 - LI Application Framework error 9540 82,541 - LI Application Framework error 9541 82,542 - LI Application Framework error 9542 82,543 - LI Application Framework error 9543 82,544 - LI Application Framework error 9544 82,545 - LI Application Framework error 9545 82,546 - LI Application Framework error 9546 82,547 - LI Application Framework error 9547 82,548 - LI Application Framework error 9548 82,549 - LI Application Framework error 9549 82,550 - LI Application Framework error 9550 82,551 - LI Application Framework error 9551 82,552 - LI Application Framework error 9552 82,553 - LI Application Framework error 9553 82,554 - LI Application Framework error 9554 82,555 - LI Application Framework error 9555 82,556 - LI Application Framework error 9556 82,557 - LI Application Framework error 9557 82,558 - LI Application Framework error 9558 82,559 - LI Application Framework error 9559 82,560 - LI Application Framework error 9560 82,561 - LI Application Framework error 9561 82,562 - LI Application Framework error 9562 82,563 - LI Application Framework error 9563 82,564 - LI Application Framework error 9564 82,565 - LI Application Framework error 9565 82,566 - LI Application Framework error 9566 82,567 - LI Application Framework error 9567 82,568 - LI Application Framework error 9568 82,569 - LI Application Framework error 9569 ************************************************************************************** 83 - CSI? ************************************************************************************** 83,2 - Spooler database error 83,3 - Cannot add - #F is already in #F 83,4 - Cannot find network from #F to #F with search constraint #H 83,5 - Removing #F would break the network of #F 83,6 - Spooling check failed - #F needs to be updated 83,7 - ISODRAFT elements may only be added if inside SPOOLER module 83,8 - #N 83,9 - Command not allowed inside SPOOLER 83,10 - #F is not a piping component 83,11 - #F is not part of a spool drawing 83,12 - Error whilst creating part numbers for #H 83,13 - #F does not have attribute #H 83,14 - Updating #F would affect other elements - Use SPOOLING UPDATE FORCED #F 83,15 - Spooling weld/joint check failed - #F needs welds/joints updated 83,16 - #N member already exists in another spool drawing 83,17 - Cannot join network in #F 83,18 - Spool drawing #F needs to be updated - no output produced for it 83,19 - Offline component #F breaks a SPOOL/FIELD 83,20 - Cannot create bolt part numbers for #F as connected item is not in spldrg 83,499 - Unexpected internal SPOOLER error 83,500 - CREF or CFRA attribute of #F is not valid 83,501 - - Data input entry ignored ************************************************************************************** 98 - DARS ************************************************************************************** 98,1 - Entering subroutine 98,2 - Input arguments: 98,3 - Project name 98,4 - Username 98,5 - Password 98,6 - Monitoring level 98,7 - Read/Write key 98,8 - MDB name 98,9 - Element name/ref 98,10 - Element type 98,11 - List position #I 98,12 - Relative position 98,13 - Attribute required 98,14 - Max array size #I 98,15 - Coordinate system 98,16 - PPoint number 98,17 - Error number #I 98,18 - Display flag 98,19 - Hashed real number #R 98,20 - Project data keyword 98,21 - Date/time 98,22 - Attribute name 98,23 - Attribute type 98,24 - No. of UDAs expected #I 98,25 - Exiting subroutine 98,26 - Output arguments: 98,27 - Error code #I 98,28 - Integer #I 98,29 - Array size #I 98,30 - Integer array 98,31 - Element #I #I 98,32 - Logical 98,33 - Logical array 98,34 - Element #I 98,35 - Name/Reference 98,36 - Orientation unit vectors 98,37 - X axis E #R N #R U #R 98,38 - Y axis E #R N #R U #R 98,39 - Z axis E #R N #R U #R 98,40 - Position E #R N #R U #R 98,41 - Direction unit vector E #R N #R U #R 98,43 - Bore #R 98,44 - Connection type 98,45 - Real #R 98,46 - Real array 98,47 - Element #I #R 98,48 - Reference 98,49 - Reference array 98,50 - Text 98,51 - Type 98,52 - Word 98,53 - Word array 98,54 - Error message 98,55 - Dehashed word 98,56 - Later date-stamp ? 98,57 - Date-stamp 98,58 - Year, Month, Day #I #I #I 98,59 - Hour, Minute, Second #I #I #I 98,60 - UDA Reporter text 98,61 - UDA units 98,62 - Number of UDAs found #I 98,63 - ***WARNING - Maximum of 100 UDA values output*** 98,64 - UDA name 98,65 - Minimum abbreviation #I 98,66 - UDA type 98,67 - Dabacon routine number #I 98,68 - Read 98,69 - Write 98,70 - Modify 98,71 - Append 98,72 - Opening databases 98,73 - Mode Type Name 98,74 - ---- ---- ---- 98,75 - Default database type: 98,76 - Implied tube 98,77 - Enclosing box co-ords #R #R #R 98,78 - #R #R #R 98,79 - Database position #I 98,80 - Jan 98,81 - Feb 98,82 - Mar 98,83 - Apr 98,84 - May 98,85 - Jun 98,86 - Jul 98,87 - Aug 98,88 - Sep 98,89 - Oct 98,90 - Nov 98,91 - Dec 98,92 - First database name 98,93 - Second database name 98,94 - Database name 98,95 - Database status #I 98,96 - Error switch 98,97 - Bore units 98,98 - Distance units 98,100 - Success 98,101 - Unknown error 98,102 - Internal error code set on entry 98,103 - Routine D3INIT has not been called 98,104 - Routine D3MMDB has not been called 98,105 - Character string output argument too short 98,106 - Invalid position keyword 98,107 - Invalid coordinate system keyword 98,108 - Invalid PPoint keyword 98,109 - Bad name/reference argument 98,110 - Argument has illegal value 98,111 - Invalid project data keyword 98,112 - Invalid date/time 98,113 - Entered date/time later than current 98,201 - Error opening Dabacon workfile 98,202 - Defunct 202 98,203 - Invalid Username or Password 98,204 - Too many users in project 98,205 - Project currently locked 98,206 - Project is incompatible version 98,207 - Too many failed initialisations 98,208 - Project not found 98,209 - Error opening runfile data file 98,210 - MDB not found 98,211 - No databases to open 98,212 - Corrupt databases 98,213 - Databases in use 98,214 - Error opening database file 98,215 - Sitefile/Security error 98,216 - Invalid project name 98,217 - Invalid default database type 98,218 - No databases of default type in MDB 98,219 - Error with system database 98,220 - Database not found 98,221 - Database not in current MDB 98,222 - Database already current 98,223 - Database not current 98,224 - Too many current databases 98,225 - Invalid database position 98,226 - Too many saved database levels 98,227 - No saved database position 98,301 - Element has no list part 98,302 - No members 98,303 - List exhausted 98,304 - Current element has no owner 98,305 - Cannot access this type of element 98,401 - Attribute not found 98,402 - Attribute of wrong type 98,403 - Element does not have PPoints 98,404 - Illegal PPoint number 98,405 - Wrong element type 98,406 - No date-stamp found 98,407 - UDA not found 98,408 - Attribute unset 98,409 - Element not on spatial map 98,410 - Leave or head tubing does not exist 98,411 - No spec. component for current element 98,501 - Dabacon error 98,502 - Undefined name/reference 98,503 - Reference to database not open 98,504 - File write error 98,505 - File read error ************************************************************************************** 99 - PDMS internal ************************************************************************************** 99,1 - Illegal return from syntax graphs 99,2 - Illegal return from PDMS 99,3 - OK 99,5 - Illegal action no. in graph 99,6 - Illegal device code 99,7 - Database error 99,24 - Y is 99,25 - and Z is 99,40 - Tab value is 99,41 - Line numbering is 99,42 - ON 99,43 - OFF 99,44 - Mode is 99,45 - Full 99,46 - Brief 99,47 - Undefined 99,48 - Commenting is 99,49 - Default values will be output 99,50 - Default values will not be output 99,51 - No Index 99,52 - Index by NAMES and REFNO 99,53 - Index by NAMES 99,54 - Index by REFNO 99,55 - Array dimensions do not allow number of elements to exceed 100. 99,56 - Cannot output connections when mode is not full or whenindexing or line numbering are on. 99,57 - spare 99,58 - Connections printed at the end of each element. 99,59 - #I connections stored 99,60 - FORMAT old 99,61 - FORMAT new 99,62 - UDAs are being output 99,63 - UDAs are not being output 99,64 - There is no ONLY selection 99,65 - External refs allowed to DB nr (size) 99,66 - ONLY the following element types are being output: 99,67 - DBTYPE #H has been specified 99,68 - No DBTYPE has been specified 99,75 - SELECT System error in 99,76 - - please report 99,77 - ERROR 99,100 - Message 99,107 - Attlib 99,108 - Symbolfile 99,110 - January 99,111 - February 99,112 - March 99,113 - April 99,114 - May 99,115 - June 99,116 - July 99,117 - August 99,118 - September 99,119 - October 99,120 - November 99,121 - December 99,122 - Sunday 99,123 - Monday 99,124 - Tuesday 99,125 - Wednesday 99,126 - Thursday 99,127 - Friday 99,128 - Saturday 99,129 - am 99,130 - pm 99,140 - Unset 99,145 - Clasher system error in 99,146 - ERROR 99,147 - Please report 99,160 - $( Inter db macro to update 99,161 - with connections from 99,162 - $( This macro should be run with write access to both databases.$) 99,163 - NEW 99,164 - JLINE NA 99,165 - CUTP E 99,166 - N 99,167 - U 99,168 - POSL NA 99,169 - OPDI E 99,170 - CREF 99,171 - E 99,172 - POS 99,173 - E 99,174 - W 99,175 - N 99,176 - S 99,177 - U 99,178 - D 99,185 - in this manner 99,190 - ERRORS - integrity checker version 99,191 - Integrity Checker statistics, version 99,192 - ------------------------------------- 99,193 - ------------------ 99,194 - database id number 99,195 - length of database in pages 99,196 - in words 99,197 - breakdown of pages 99,198 - ------------------ 99,199 - naming pages 99,200 - template pages 99,201 - datastructure pages 99,202 - space usage 99,203 - ----------- 99,204 - datastructure pages: 99,205 - live space 99,206 - free space 99,207 - dead space 99,208 - naming pages: 99,209 - elements 99,210 - -------- 99,211 - total number of elements 99,212 - average length of an element in words 99,213 - average database words required for an element 99,214 - average number of elements per database page 99,215 - names 99,216 - ----- 99,217 - number of levels 99,218 - total number of names 99,219 - total characters in names 99,220 - average characters per name 99,221 - total characters stored in names 99,222 - average characters stored per name 99,223 - matching references with names 99,224 - ------------------------------ 99,225 - total number of page turnings to find names 99,226 - average page turnings per name 99,227 - max page turnings required to find one name 99,228 - number of times name is not 99,229 - found on pointed-to page 99,230 - times name is on pointed-to page (hit rate) 99,231 - p.i. page 99,232 - dst page 99,233 - NO TEXT FOR ERROR 99,234 - PAGE = 99,236 - HEADER = 99,237 - POINTER = 99,238 - TEMPLATE 99,239 - ELEMENT 99,241 - CURRENT DATA PAGE = 99,280 - System 99,281 - Design 99,282 - Catalogue 99,284 - Property 99,287 - Paddle 99,288 - Dictionary 99,300 - Date 99,301 - Time 99,320 - Touches are not to be included in check 99,321 - Touches are to be included in check 99,322 - No volumetric limits 99,323 - to 99,330 - Clasher system error in 99,331 - Please report 99,510 - Error finding list of Worlds 99,530 - @ can only be used in text strings. 99,531 - $@ must be used to place @ in text strings. 99,532 - Undefined UDA name. 99,550 - System error - Please report 99,551 - Illegal reference 99,552 - ERROR in SPLASH routine 99,553 - of 99,554 - Nulref 99,555 - True 99,556 - False 99,557 - Unset 99,570 - Y is 99,571 - and Z is 99,572 - mm 99,580 - Cursor mode quit in macro ************************************************************************************** 100 - Backbone ************************************************************************************** 100,1 - Pen 100,2 - Colour 100,3 - Linestyle 100,4 - Pen nos. are from 1 to 512 only 100,5 - #I colours on this device 100,6 - Linestyles are from 1 to 15 only 100,7 - Red 100,8 - Green 100,9 - Blue 100,10 - Solid 100,11 - Dashed 100,12 - Chained 100,13 - Dashl 100,14 - Dotl 100,15 - Gapl 100,16 - Discrete 100,17 - Continuous 100,18 - Colour Alpha 100,19 - Colour Background 100,20 - Session number #I does not exist 100,101 - Grey 100,102 - Red 100,103 - Orange 100,104 - Yellow 100,105 - Green 100,106 - Cyan 100,107 - Blue 100,108 - Violet 100,109 - Brown 100,110 - White 100,111 - Pink 100,112 - Mauve 100,113 - Turquoise 100,114 - Indigo 100,115 - Black 100,116 - Magenta ************************************************************************************** 101 - PDMS to Hitachi Interface Program ************************************************************************************** 101,1 - Multiple database not selected 101,2 - Unable to open files 101,3 - Unable to open Databases 101,4 - Unable to switch to Design Database 101,7 - Illegal PDMS name 101,8 - PDMS name does not exist or reference number can not be found 101,11 - Site is the only element which may be processed from a Group Level 101,13 - PDMS Component does not exist 101,14 - Parameter missing from Catalogue Database 101,15 - PDMS Primitive not known 101,16 - PDMS Catalogue Component can not be processed 101,17 - Warning: PDMS SPREF/CATR/SPCO or GMREF/GSTR not set 101,18 - PDMS Catalogue DB not open 101,19 - PDMS Structures -- Wrong Element Type found 101,20 - PDMS Structures -- Can not get Transformation Matrix 101,21 - PDMS Catalogue Primitive #F detected with NULL direction 101,101 - Illegal Action number 101,201 - Name too long - truncated 101,202 - Negative or zero values not allowed 101,203 - Output field width too small 101,204 - Text should be blank 101,205 - Illegal Format descriptor 101,206 - Value not found in Format descriptor 101,207 - Mapping Table memory error 101,208 - Mapping Table already exists 101,209 - Error building the MAP links 101,299 - Unknown Mapping error 101,301 - ISFF file format not available 101,302 - library does not accept this hardware 101,303 - iogini has not been called 101,304 - file does not exist 101,305 - cannot open file 101,306 - there is no ISFF file open 101,307 - cannot close the file 101,308 - end of file found 101,309 - insufficient space provided 101,310 - 2D request on 3D file 101,311 - 3D request on 2D file 101,312 - type does not exist 101,313 - type is invalid for query routine 101,314 - invalid level in type 9 101,315 - invalid dimension 101,316 - error reading IDGSfile 101,317 - invalid exponent in double 101,318 - group not applicable to type 101,319 - attributes not applicable 101,320 - SEED3D_DIR has not been declared 101,321 - Can not open seed file 101,322 - Can not open ISFF file 101,399 - Unknown error from IOGL library routine ************************************************************************************** 141 - Administration Application ************************************************************************************** 141,1 - Admin Objects form must be displayed first 141,2 - Admin Objects form currently displaying #N objects 141,3 - #N element #N has been deleted from the project 141,4 - Updating form "#N" with #N elements ... 141,5 - Project #N is LOCKED 141,6 - Project #N is UNLOCKED 141,7 - Selected element (#N) is not of type #N 141,8 - Okay to delete #N #N? 141,9 - Unable to delete #N #N due to - #N 141,10 - Could not convert #N to an integer value 141,11 - Reference #N not found when updating element list 141,12 - The name #N already exists in project. (Type #N) 141,13 - Cannot send message. No message defined. 141,14 - Cannot send message. No recipients selected. 141,15 - Cannot send message. Invalid #N name [#N]. 141,16 - Project Number is greater than 16 characters. Attribute will be truncated. 141,17 - The project is still locked, do you wish to unlock the project before leaving Project Administration. 141,18 - Do you wish to exit Project Administration to the operating system now? 141,19 - Module number #N is already defined in the project. 141,20 - Module #N already already exists in the project. 141,21 - #N names can only contain alphabetic characters (A-Z). The value "#N" is invalid. 141,22 - Error copying module #N, due to - #N 141,23 - Okay to delete module #N? 141,24 - Failed to delete module #N due to - #N 141,25 - Module #N already has a default DB type of #N. This cannot be unset. 141,26 - Module #N has a mode for database type #N set to #N. This value may be changed but not unset. 141,27 - Modifying module #N's database modes or buffer settings may cause serious problems with PDMS. Do you wish to continue? 141,28 - Adding a #N database mode to module #N may result in a change of behaviour in PDMS. Do you wish to continue? 141,29 - Unable to copy element type #N as there is no current element of that type. 141,30 - The element you are trying to change is already claimed by another user 141,31 - Okay to enable GENERAL users to change their passwords in Session Manager ? 141,32 - Okay to disable GENERAL users from changing their passwords in Session Manager ? 141,51 - Cannot #N team - No team name specified. 141,52 - Team #N already exists in project. 141,53 - Cannot modify team so that the team name is unset. 141,54 - Unable to get data for current team [#N]. 141,55 - Could not copy team due to - #N 141,56 - Cannot copy team when target name is unset. 141,57 - Okay to delete team #N? 141,58 - Unable to delete team #N due to - #N 141,59 - Cannot delete team #N as it still owns the databases listed. Remove the databases first, then delete team. 141,60 - Team names may not contain numbers. 141,101 - Cannot #N user - No username specified. 141,102 - Cannot #N user - No password specified. 141,103 - User #N already exists in project. 141,104 - Cannot modify user so that username is unset. 141,105 - Cannot modify user so that password is unset. 141,106 - Unable to get data for current user [#N]. 141,107 - Cannot copy user when target name is unset. 141,108 - Could not copy user due to - #N. 141,110 - #N is the only FREE user in this project. Continue with delete operation? 141,111 - Okay to delete user #N? 141,112 - Unable to delete user #N due to - #N 141,113 - User names may not contain numbers. 141,114 - #N is the current user (FREE user). Continue to change security? 141,151 - Cannot #N database - No team selected. 141,152 - Cannot #N database - No database name specified. 141,153 - Database #N already exists in project. 141,154 - Maximum number of databases reached in project - Unable to create new database. 141,155 - Database file number already used in project. 141,156 - Virgin database for database type (#N) cannot be opened. 141,157 - Area (#N) does not exists. Please check your environment variables. 141,158 - Database #N (#N) already used. 141,159 - Unable to create database due to - #N 141,160 - Unable to get data for current database [#N]. 141,161 - Cannot modify #N as it is a foreign database. 141,162 - Cannot modify database so that database name is unset. 141,163 - Cannot open database file. Check the area (#N) environment variable. 141,164 - Cannot copy database when target name is unset. 141,165 - Cannot copy database to an identical name. 141,166 - Cannot open file for database [#N]. 141,167 - Cannot create copy database. Please check that you have enough disk space. 141,168 - Could not copy database due to - #N 141,169 - Database #N is foreign. Use "Exclude Db..." to remove from project. 141,170 - Okay to delete database #N?. 141,171 - Unable to delete database #N due to - #N 141,172 - Okay to exclude database #N from project #N? 141,173 - Could not exclude database #N due to - #N 141,174 - Database file number (#N) already used. 141,175 - Database #N already exists. Do you wish to overwrite the existing database? 141,176 - You have selected #N databases to exclude. Do you wish to verify each one before it is excluded? 141,177 - There are no foreign projects in your environment. The foreign database form will not be shown. 141,178 - Foreign database #N not found in project #N. 141,179 - #N foreign database #N from project #N... 141,180 - Unable to include #N as team #N does not exist. Do you wish to create it now? 141,181 - Error creating team #N to include database #N. Database not included. 141,182 - Could not #N foreign database #N due to - #N. 141,183 - Could not change access mode of database #N as it is in use by user #N. 141,184 - Expunging claimlist in database #N... 141,185 - Unable to expunge claimlist for #N due to - #N 141,186 - Warning - DB Numbers over 7000 are reserved for AVEVA use. Do you wish to continue ? 141,201 - Cannot #N multiple database - No mdb name specified. 141,202 - Multiple database #N already exists in project. 141,203 - Unable to get data for current multiple database [#N]. 141,204 - Cannot modify multiple database so that name is unset. 141,205 - Maximum number of databases in multiple database reached. 141,206 - Multiple database already contains a copy of database #N. 141,207 - Database #N already current in multiple database. 141,208 - Database #N is not in multiple database. 141,209 - Database #N is not current in multiple database. 141,210 - Database #N is no longer in multiple database. 141,211 - One or both of the databases specified is no longer in the multiple database. 141,212 - Cannot copy multiple database when target name is unset. 141,213 - Could not copy multiple database due to - #N 141,214 - Okay to delete multiple database #N? 141,215 - Could not delete multiple database #N due to - #N 141,216 - Updating multiple database #N members... 141,217 - Only one current database can be selected for this operation. 141,218 - Only one deferred database can be selected for this operation. 141,219 - If the current selection were made current the 300 current database limit would be exceeded. 141,220 - If the current selection were made current the 1000 current database limit would be exceeded. 141,221 - Exchange operation can be performed if the same number of databases is selected on both sides. 141,301 - Okay to expunge all users from project #N? 141,302 - Okay to expunge process #N from project #N? 141,303 - Cannot expunge claims on a foreign database (#N). 141,304 - Okay to expunge all claims in database #N? 141,305 - Could not expunge database #N due to - #N. 141,306 - Only MULTIWRITE databases may be expunged. Database #N has #N access.. 141,307 - The current process cannot be expunged. 141,308 - Cannot expunge process [#N] due to - #N. 141,309 - Nothing to perform integrity check on! 141,310 - Checking database #N database integrity... 141,311 - Checking the whole project may take some time. Do you wish to continue? 141,312 - Checking project database integrity... 141,313 - Do you want to view the integrity check results now? 141,314 - Unable to find font data file #N - Unable to open Font Definition form. 141,315 - Unable to recreate project structure due to - #N 141,316 - Cannot replicate project to an existing project (#N). The project code is already used. 141,317 - The replication target directory #N contains files. These may be overwritten. 141,318 - Project #N is unlocked. Do you wish to lock the project before replication? 141,319 - Replicating project #N to project #N... 141,320 - Environment variable "#N" is missing. Replication to project #N cannot continue. 141,321 - Replication failed as database files already exist in target directories. Please ensure the directories are em... 141,322 - Replication failed as the project still contains users. Please log the users out then try again. 141,323 - Replication failed due to - #N 141,324 - Font definition file #N.gfb not found in font directory #N. 141,325 - User #N is not currently in project 141,326 - Expunge failed 141,501 - Cannot #N group -- No group name specified. 141,502 - Group #N already exists in project. 141,503 - Cannot #N location -- No location name specified. 141,504 - Location #N already exists in project. 141,505 - Changing the parent of a location may cause extra databases to be allocated to the locations' ancestors. Do yo... 141,506 - A location's Id (LOCID) must be a 3 character alpha-numeric code. 141,507 - The location Id (#N) already exists within the project. LOCID must be unique in the project. 141,508 - Cannot #N location -- No location Id specified. 141,509 - Cannot #N location -- Daemon hostname not set. 141,510 - All locations (except the hub and offline locations) must have a parent. 141,511 - Location #N is about to be generated. This action will perform a SAVEWORK. Do you wish to allocate #N database... 141,512 - Location #N cannot become off-line whilst it has descendents. 141,513 - Locations cannot be on-line when the project hub is offline. 141,514 - Cannot create location with Id #N as environment variable #N is unset. 141,515 - Generating data structure for new location #N (#N)... 141,516 - The database allocation for #N has been inherited from #N and may only be modified once the location is initialised. 141,517 - Unable to get data for selected location [#N]. 141,518 - Database cannot be allocated to location #N until it is initialised. 141,519 - Database #N cannot be deallocated from the project hub [#N]. 141,520 - Cannot deallocate database #N from location #N while it remains allocated at child #N. 141,521 - Database #N must be primary at hub [#N] to be deallocated from all locations. 141,522 - Cannot deallocate database #N from primary location #N. Change primary first. 141,523 - Change in allocation of database #N failed due to - #N 141,524 - There are no project locations suitable to become a new project hub. Cannot change hub 141,525 - Cannot change project hub to location #N, as database allocation is different. DB allocation at the new hub mu... 141,526 - Changing the project hub to #N will SAVEWORK and re-start the UI to a non hub state. Do you wish to continue?. 141,527 - Change project hub command failed. Could not contact host #N. 141,528 - Change project hub command failed. Could not contact daemon on host #N 141,529 - Change project hub command failed due to error - #N 141,530 - Location #N is a child of #N, and cannot becomes its parent. 141,531 - The project contains no off-line locations to transfer data to. 141,532 - Cannot transfer to or from #N as as environment variable #N is unset. 141,533 - Transfer export directory #N, contains files. Ensure all export directories are empty before starting. 141,534 - Transfer import directory #N, contains no files. 141,535 - Exporting data to #N may take some time. Do you wish to continue. 141,536 - Importing data from #N may take some time. Ensure that your project is backed-up before proceeding as failure ... 141,537 - #N data for location #N, please wait... 141,538 - #N of data for location #N failed due to - #N 141,539 - You cannot delete the project hub (#N)! 141,540 - Cannot delete location #N as it still has #N descendent location(s). 141,541 - Cannot delete location #N as it still has #N database(s) allocated to it. 141,542 - Okay to delete location #N?. 141,543 - Unable to delete location #N due to - #N 141,544 - Database #N will be allocated at the Hub only. Message after allocation failed from Create database 141,545 - Change primary location for database #N failed due to - #N Failed on change primary 141,546 - Cannot delete database #N as it is still allocated to one or more locations. Cannot delete an allocated DB 141,547 - A database cannot have it's primary location changed from an on-line satellite (#N) to an off-line satellite (#N). 141,548 - A database cannot have it's primary location changed from an off-line satellite (#N) to an on-line satellite (#N). 141,549 - Automatically reordering database allocation for location #N... 141,550 - Cannot de-allocate database #N from #N while it is still allocated to child location #N. Use INCLUDE DESCENDANTS option. 141,551 - Cannot de-allocate all databases from location #N as there are still descendant locations. 141,552 - Cannot de-allocate database #N from #N whilst it is primary. Database is still primary at location at time of ... 141,553 - Cannot de-allocate database #N from #N as it is still primary at #N (child location). 141,554 - Cannot de-allocate all databases from #N whilst #N is still primary at #N (child location. 141,555 - Unable to #N database #N due to - #N 141,556 - Database #N cannot be re-named #N as the target name already exists and is allocated to other locations. 141,557 - Location #N is off-line and cannot be an administrating location. 141,558 - Location #N is currently administered by location #N. Are you sure you want #N as location #N's administering location? 141,601 - Current location has no project locations to communicate with.. 141,602 - The current location is off-line and cannot communicate through the PDMS Global daemon. 141,603 - Update event timer value has invalid format. 141,604 - Illegal character in timer field #N value. 141,605 - Illegal use of "#N" in timer value #N field. 141,606 - The minutes field may not have a value of "*". 141,607 - Invalid format of timer value #N field. #N 141,608 - Value #N is below the lower for the timer value #N field. 141,609 - Value #N is above the upper for the timer value #N field. 141,610 - Value #N is out of range for the timer value #N field. 141,611 - Cannot #N update event - No location selected. Communications event location has not been set 141,612 - Cannot #N update event - No comms event name specified. Comms event name field is empty of unset. 141,613 - Update Event #N already exists in project Attempt to create or copy a comms event which already exists. 141,614 - Unable to get data for selected update event [#N]. Attempt to get data for selected LCOMD failed. 141,701 - There are no other on-line locations in this project. 141,702 - Cannot send message. No location selected. 141,703 - Cannot de-allocate database #N from project hub. 141,704 - Cannot update databases due to error - #N 141,705 - Query of locking and isolation failed due to error - #N 141,706 - Database #N cannot be recovered as it is not present at any other on-line locations. 141,707 - WARNING - Recovery of a PRIMARY database will result in a possible loss of work. This operation is a last reso... 141,708 - WARNING - Recovery of a secondary database may result in loss of work. Do you wish to continue?Warn user. 141,709 - Cannot recover database #N due to error - #N Failed on RECOVER command. 141,710 - Location #N is already initialised. 141,711 - Location #N is off-line and does not require initialising. Attempt to initialise offline location. 141,712 - Initialisation failed. Could not contact host #N 141,713 - Initialisation failed. Could not contact daemon on host #N 141,714 - Initialisation failed - #N Non-specific error 141,715 - There are no transient database in the project at present. Show Restore DB Owner form not required. 141,716 - Error recovering previous owner for DB #N due to error - #N. Error on PREVOWNER 141,717 - #N cannot be set to an invalid state. User attempts to set lock or isolation to Unknown. 141,718 - Remote #N command failed. Could not contact host #N 141,719 - Remote #N command failed. Could not contact daemon on host #N 141,720 - Remote #N command failed due to error - #N Non-specific error 141,721 - Remote lock or isolation command message sent. 141,722 - Remote lock or isolation command message failed due to error - #N 141,723 - Synchronisation of database failed due to - #N Synchronisation error 141,724 - Remote synchronisation at #N failed due to - #N Remote synchronisation failed. 141,725 - WARNING - Recovery of a PRIMARY database [#N] at location #N will result in loss of work. This operation is a ... 141,726 - WARNING - Recovery of a secondary database [#N] at location #N may result in loss of work. Do you wish to continue?. 141,727 - Remote database recovery at #N failed due to - #N 141,728 - Purging picture files will remove copy picture created by data transfer. Do you wish to continue? 141,729 - Purging database files will remove copy database created by data transfer. Do you wish to continue? 141,730 - Previous hub location cannot be restored, as #N is the new hub location. 141,731 - The current location [#N] is not the previous hub [#N] and has no authority to restore it!. 141,732 - Recovering the project hub to #N will force a savework and restart the user interface. Do you wish to continue?. 141,733 - Recover project hub failed due to - #N 141,734 - Send message command failed as one or more daemons were unreachable.. 141,735 - test message 141,801 - database area 141,802 - database number 141,803 - Team 141,804 - User 141,805 - number 141,806 - file number 141,807 - copy foreign 141,808 - Copying 141,809 - copy foreign database without 141,810 - copy 141,811 - DB 141,812 - include database without 141,813 - include 141,814 - Including 141,815 - LOC 141,816 - Database Integrity Check Output 141,817 - Style 141,818 - with database allocated 141,819 - no database allocated 141,820 - Module 141,821 - Isolation 141,822 - Lock 141,823 - Location 141,824 - Database 141,851 - Create Multiple Database 141,852 - Modify Multiple Database: 141,853 - Modify Team: 141,854 - Create Team 141,855 - Modify User: 141,856 - Create User 141,857 - Modify Location Group: 141,858 - Modify Update Event: ************************************************************************************** 142 - Generic Checker Utilities ************************************************************************************** 142,1 - No checks have been selected, you must select one or more of the "Available Checks". 142,2 - Undefined function (#N). ************************************************************************************** 143 - Database Navigation & Operation ************************************************************************************** 143,1 - World does not have an owner. 143,2 - The owner does not have a position. 143,3 - Unable to access any elements of type #N with #N. 143,4 - #N is unnamed. 143,5 - Unable to convert #N as #N is unnamed. 143,6 - Name (#N) already exists. 143,7 - Undefined name #N 143,8 - Null/Blank names are not permissible. 143,9 - Names must not contain spaces. 143,10 - "SetStar" is unset, do you want to use the current elements name? 143,11 - #N #N is not of type #N. 143,12 - #N must be a DB reference or valid navigation string. 143,20 - Element #N is locked. 143,21 - Element #N is read only. 143,22 - Element #N is claimed out by user #N. 143,51 - State "#N" is not recognised 143,52 - Attribute TRSETL may only be set within ADMIN 143,53 - State #N may not be set 143,54 - Module "#N" is not recognised 143,55 - Command "#N" is not recognised 143,56 - Operation "#N" is not recognised ************************************************************************************** 144 - Draft Application ************************************************************************************** 144,1 - Cannot climb to #N from #N 144,2 - Loading from File... 144,3 - Saving to File... 144,4 - You must be at or below a SHEE,BACK,OVER,LALB,SYLB or ISOLB 144,501 - Configuration file #N is not modifiable by users 144,502 - No Configuration file selected 144,503 - Configuration filename should start with dra-dxf- 144,504 - Header filename does not end in .dxf 144,505 - #N in #N syntax 144,506 - Configuration changes only apply to current session and will not be saved to file. For permanent modifications... 144,507 - Applying Configuration settings... 144,508 - Currently modifying selected Configuration - Cannot re-select 144,509 - Changes to Configuration are unsaved. Do you wish to save changes? 144,510 - Selection not found 144,511 - DXF configuration data file corrupt 144,512 - This option, when applied, will disable Group switches, Linetype and Colour mappings, and will switch off Z co... 144,513 - This option, when applied, will disable Group switches and the Group settings form ************************************************************************************** 145 - Event Driven Graphics Utilities ************************************************************************************** 145,1 - Unknown inmode "#N" for #N. 145,2 - Design views are currently being used for the "#N" application. ************************************************************************************** 146 - General Application Utilities ************************************************************************************** 146,1 - Unknown Application/Utility Code (#N). 146,2 - Unknown Message Code (#N) for Application "#N". 146,3 - Unknown error message number (#N) for Application/Utility "#N". 146,4 - Maximum number of dynamic messages is 9. 146,5 - No messages defined for Application/Utility "#N". 146,6 - Message stack is incomplete (error code #N) 146,7 - Argument no. #N passed to function #N is incorrect 146,8 - Aborted #N - #N. 146,9 - File #N does not exist. 146,10 - File #N exists, do you want to overwrite it? 146,11 - Do you want to append to the file #N? 146,12 - File #N does not exist, do you want to create a new file? 146,13 - Auto Naming rules must be given a #N. 146,14 - #N Data file #N is corrupted #N 146,15 - Key #N has already been used for an auto naming rule. 146,16 - Non Graphics Device (AppWare will not be loaded). 146,17 - Save #N before #N file 146,18 - AutoName Key #N does not exist 146,19 - Rule #N is not valid for element #N 146,20 - Unable to find autoname rule for element type #N 146,21 - No current list 146,22 - Unable to read #N data from file #N 146,23 - Directory #N does not exist. 146,24 - Passed GADGET for argument #N, must be of type "#N". 146,25 - Unknown option "#N" for #N. 146,26 - Unable to open file #N, due to #N 146,27 - Current element cannot be moved 146,28 - A filename is required. 146,29 - No filename given, use Save as... 146,30 - Colour #N is not a valid colour 146,31 - System Options File #N is corrupt, setting default options 146,32 - User Options File #N is corrupt 146,33 - File #N is not an auto naming settings file 146,34 - A key must be defined for a naming rule 146,35 - The key has been used for another naming rule, please use a different key 146,36 - Unable to read file record, file #N is not open 146,37 - Unable to write file record, file #N is not open 146,38 - Unable to move file, file #N does not exist 146,39 - Cannot rename a directory 146,40 - #N is a directory 146,41 - #N #N already exists 146,42 - Cannot delete a directory 146,43 - File #N exists, user does not want to append to it 146,44 - File #N exists, user does not want to overwrite to it 146,45 - File #N does not exist, user does not want to create it 146,46 - #N Object is UNSET 146,47 - File length has exceeded #N lines 146,48 - #N is not a valid year 146,49 - #N is not a valid month 146,50 - #N is not a valid Date in #N #N 146,51 - #N is not a valid Hour value 146,52 - #N is not a valid Minute value 146,53 - #N is not a valid Second value 146,54 - Unable to copy file, file #N does not exist 146,55 - Current user does not have administrator status 146,56 - Format rule #N is not valid for element #N ************************************************************************************** 147 - Graphical View Utilities ************************************************************************************** 147,1 - No 3D Graphical Views have been selected. 147,2 - No elements in "#N", unable to derive view limits. 147,3 - Must provide a valid View dbref to create a ViewFinder object 147,100 - Unknown aid line group (#N). 147,101 - No more entries available for group "#N". 147,200 - "#N" is an unknown basic grid type. 147,201 - Radial Grid 147,202 - Linear Grid 147,203 - Plant Grid 147,210 - #N "#N" is already define. 147,211 - Unable to find grid "#N" in the "#N" store. 147,212 - Grid definition must have a title. 147,213 - Grid "#N" already exists. 147,214 - Current grid has not been saved, OK to save definition? 147,300 - Cannot Delete this Selection - it contains Elements without Write Access 147,301 - Cannot Move this Selection - it contains Elements without Write Access 147,302 - Are you sure you want to delete all Selected Elements? 147,303 - Cannot Undo : the Database has changed since the last Mark was set 147,304 - Cannot Undo : 147,305 - Cannot Redo : 147,306 - Cannot set Mark in Database : 147,307 - Increment value out of range. Linear: 0.01->10000, Angular: 0.01->360. 147,308 - The direction you have entered is invalid. 147,309 - The value you have entered is invalid. 147,310 - The undo/redo action command from the PML undoable object is invalid. 147,311 - The move offset you have entered is invalid. The selection would clash with pipe components or be placed outs... 147,312 - Unable to move Selection. 147,313 - Undo stack is empty 147,314 - Redo stack is empty 147,315 - View Frame is Locked 147,316 - Cannot move View Frame when not aligned to view ************************************************************************************** 149 - List Maintenance Utilities ************************************************************************************** 149,1 - No list currently defined. 149,2 - Unable to find list "#N" 149,3 - List "#N" already defined. 149,4 - No list specified. 149,5 - List has been updated, do you want to save changed? 149,6 - No elements have been selected. 149,7 - List has no members. 149,8 - List "#N", has no members. 149,9 - Unable to release all elements 149,99 - Lost list "#N"! 149,100 - Unknown storage group "#N". 149,101 - Unknown storage area "#N" for group "#N". 149,102 - Unable to derive storage area for "#N". 149,103 - Unable to derive storage area for "#N", #N. 149,104 - Unable to derive storage area for "#N", no elements found that conform to the required storage rule. 149,105 - Unable to derive storage area for "#N", no storage rule defined. 149,200 - "#N (#N) of DB #N" . Are you sure you want to action from this level? 149,201 - Any high level elements listed may take time to process. Do you wish to continue? ************************************************************************************** 150 - Administration and Monitor Utilities ************************************************************************************** 150,1 - Invalid multiple database "#N". 150,2 - Multiple database not set. 150,3 - Make current all deferred databases - are you sure? 150,4 - Defer all databases - are you sure? 150,5 - Are you sure you want to reset this multiple database to system status? 150,6 - Insufficient status to set this mode. 150,21 - Invalid username or password. 150,22 - Username not set. 150,23 - Password entered is greater than 6 characters - truncated 150,24 - Please re-enter password for confirmation. 150,25 - Password changed successfully. 150,26 - Passwords differ. Current password unchanged. 150,27 - User password not changed. 150,28 - Project #N only contains FREE users. User list not available. 150,41 - Invalid project code "#N". 150,42 - Environment variable not set for project "#N". 150,43 - Project "#N" is currently locked. 150,44 - Too many users in project "#N". 150,45 - Project "#N" is not a PDMS11 project. 150,46 - Project not set. 150,47 - Project codes must be 3 characters. 150,48 - Project code #N to long. Code will be truncated. 150,49 - Project codes must not contain numeric values. 150,61 - Okay to delete macro number #N? 150,62 - Selected user no longer in project 150,63 - Project has been expunged of users! 150,64 - No inter-db macros to delete. 150,65 - Unable to delete macro #N due to - #N ************************************************************************************** 151 - Positioning and Orientation Utilities ************************************************************************************** 151,1 - Element (#N) does not have a position attribute. 151,2 - Element (#N) does not have an orientation attribute. 151,3 - Unable to derived position of element (#N). 151,4 - Unable to derived orientation of element (#N). 151,5 - Unable to change "wrt" to (#N), reverting to (#N) 151,100 - Invalid position input. 151,200 - Invalid direction input. 151,201 - Degenerate orientation. 151,300 - Incomplete grid definition. ************************************************************************************** 152 - Common Rule Definition ************************************************************************************** 152,1 - You must supply a name 152,2 - Rule name #N is used for an existing rule 152,3 - Error writing to #N rule data file #N 152,4 - Rule with name #N does not exist 152,5 - Rule data file #N is corrupt 152,6 - #N Supplied rule data is read only 152,7 - There is no rule defined with name #N ************************************************************************************** 153 - Specification Maintenance and use ************************************************************************************** 153,1 - Unable to find specification World of type (#N). 153,2 - Unable to find specification of type (#N). 153,3 - Unable to find specification #N. 153,4 - No selections available. 153,5 - Element #N does no have a specification reference set. 153,6 - No specification has been supplied. 153,7 - Element #N is not a specification. 153,8 - Element #N is not a valid specification. 153,9 - Selection complete. 153,10 - Specification "#N" is not contained within the "Specification List", adding it to the list. 153,11 - Selection item "#N" is not a valid specification element. 153,12 - **** There are no links defined for specification gadgets ***** 153,13 - No selection defined. 153,14 - Selection is incomplete. 153,15 - Element #N does not have a Specification Reference attribute. 153,16 - Element #N is not a valid specification component. 153,17 - No Specifications has been supplied to the selection utility. ************************************************************************************** 154 - Spooler Application ************************************************************************************** 154,1 - Modify not allowed whilst Update form is active. 154,2 - Modify not allowed whilst Renumber form is active. 154,3 - Check not allowed whilst Update form is active. 154,4 - Check not allowed whilst Modify form is active. 154,5 - Update not allowed whilst Renumber form is active. 154,6 - Update not allowed whilst Modify form is active. 154,7 - Renumber not allowed whilst Update form is active. 154,8 - Renumber not allowed whilst Modify form is active. 154,20 - Spools will be renumbered 154,21 - Welds will be renumbered 154,22 - Joints will be renumbered 154,23 - Parts will be renumbered 154,24 - Bends will be renumbered 154,25 - Contents have not been checked 154,26 - Contents need aligning with model 154,27 - Contents are aligned with model 154,28 - Welds have not been checked 154,29 - Welds need aligning with model 154,30 - Welds are aligned with model 154,31 - Joints have not been checked 154,32 - Joints need aligning with model 154,33 - Joints are aligned with model 154,34 - Need to align dependent spool drawing. OK to continue? 154,35 - Update complete 154,36 - Update complete - no manual selection required 154,37 - No data selected 154,42 - Cancelling the Update may result in loss of numbering data. Are you sure you want to cancel the update operation? 154,43 - Spool data will be updated 154,44 - Field data will be updated 154,45 - Weld data will be updated 154,46 - Joint data will be updated 154,47 - Part numbers will be updated 154,48 - Bend numbers will be updated 154,58 - Part numbers have not been checked 154,59 - Bend numbers have not been checked 154,60 - Spool numbers have not been checked 154,61 - Weld numbers have not been checked 154,62 - Joint numbers have not been checked 154,63 - Spool drawing has been issued - renumbering is not allowed 154,64 - Spool number required at #N 154,65 - Illegal value for spool number at #N 154,66 - Duplicate spool numbers at #N and #N 154,67 - Smaximum should be #R at #N 154,68 - No errors in spool numbering 154,69 - Joint number required at #N 154,70 - Illegal value for joint number at #N 154,71 - Duplicate joint numbers at #N and #N 154,72 - Jmaximum should be #R at #N 154,73 - No errors in joint numbering 154,74 - Weld number required at #N 154,75 - Illegal value for weld number at #N 154,76 - Duplicate weld numbers at #N and #N 154,77 - Wmaximum should be #R at #N 154,78 - No errors in weld numbering 154,79 - No errors in part numbering 154,80 - Bend number required at #N 154,81 - Illegal value for bend number at #N 154,82 - Duplicate bend numbers at #N and #N 154,83 - Bmaximum should be #R at #N 154,84 - No errors in bend numbering 154,91 - Attribute #N may not be modified 154,92 - Attribute not recognised for validation 154,93 - Attribute not recognised for setting 154,94 - Illegal value for #N 154,95 - #N #R has already been used 154,96 - Data is not up to date so may not be modified 154,110 - Unable to navigate to #N element from current database position 154,111 - Must be at a Piping or Spool Drawing element 154,112 - No piping material 154,113 - Must be at a Piping component 154,114 - User is not allowed to include or reorder SPLDRG members 154,115 - Position is not within available tube length 154,130 - Unable to delete #N #N 154,131 - #N #N does not have any members. 154,132 - Ok to delete #N #N Members? 154,133 - Ok to delete #N #N? 154,140 - Aligning contents for #N 154,141 - Updating spool data for #N 154,142 - Updating field data for #N 154,143 - Aligning welds and joints for #N 154,144 - Aligning welds for #N 154,145 - Aligning joints for #N 154,146 - Updating weld data for #N 154,147 - Updating joint data for #N 154,148 - Updating part numbers for #N 154,149 - Updating bend numbers for #N 154,160 - Invalid type for piping MTO 154,161 - Bolt data in material control file is out of date 154,162 - Invalid spref at #N 154,163 - Change of tube partnumber between #N and #N 154,164 - SplMto cannot calculate tube pieces - main branch not inline through #N ************************************************************************************** 155 - General Structural Application ************************************************************************************** 155,1 - Element is not a SCTN or a soft-type of one 155,2 - Unable to access Catalogue reference 155,3 - Unable to access data set of item 155,4 - Unable to access template or catalogue reference 155,5 - Unable to access data set of template 155,6 - Unable to find reference to plot file 155,7 - Unable to find plot file #N 155,8 - Element does not have a template 155,9 - Cannot demolish template 155,10 - First element in spine cannot be CURVE 155,11 - Cannot have two success CURVEs 155,12 - Last element in spine cannot be CURVE 155,13 - Need two vertices before a radius can be defined 155,14 - Selection must be complete before proceeding 155,15 - Cannot find an STWALL 155,16 - Cannot find an SCTN 155,17 - Element is not GENSEC or SCTN or softtype of one 155,18 - Cannot find a panel fitting 155,19 - Cannot find a fitting or fixing 155,20 - Cannot find an extrusion type element 155,21 - Cannot find a loop type element under an extrusion 155,22 - Cannot create a fitting at this level 155,23 - Error in #F : facet not closed 155,24 - Error in #F : facet enclosure fault 155,25 - Error in #F : facet not planar 155,26 - Error in #F : surface not closed 155,27 - Error in #F : surface enclosure fault 155,28 - Warning: unable to find POINT referenced in #F ************************************************************************************** 156 - Structural Steel Application ************************************************************************************** 156,1 - No Section Specification ************************************************************************************** 157 - Civils Application ************************************************************************************** 157,1 - No Wall Specification 157,2 - No Floor specification 157,3 - No panel loop 157,4 - Cannot trace panel with less than three vertices 157,5 - Not a Panel 157,6 - Minimum thickness is greater than actual thickness 157,7 - Low point not yet defined 157,8 - Cannot use a floor template to trace 157,9 - Cannot use a wall template to trace 157,10 - Cannot determine position of this element 157,11 - Cannot determine edge pick on top or bottom face of panel 157,12 - Cannot find FLOOR or SCREED for panel ************************************************************************************** 158 - Panel and Plate Application ************************************************************************************** 158,1 - No Plate Specification ************************************************************************************** 159 - Access Stairs and Ladders Application ************************************************************************************** ************************************************************************************** 160 - FILE HANDLING ERRORS ************************************************************************************** 160,7 - Argument no. #N passed to method #N is incorrect 160,8 - File system error on file #N - #N. 160,9 - File #N does not exist. 160,10 - File #N exists, do you want to overwrite it? 160,36 - Unable to read file record, file #N is not open 160,37 - Unable to write file record, file #N is not open 160,38 - Unable to move file, file #N does not exist 160,39 - Cannot move/copy a directory 160,42 - Cannot delete a directory 160,44 - File #N exists, user does not want to overwrite to it 160,46 - #N Object is UNSET 160,47 - File length has exceeded #N lines 160,54 - Unable to copy file, file #N does not exist 160,55 - Cannot overwrite directory with file 160,56 - File #N already exists ************************************************************************************** 161 - CLOCK HANDLING ERRORS ************************************************************************************** 161,1 - DATETIME object is unset 161,7 - Argument no. #N passed to method #N is incorrect 161,48 - #N is not a valid year 161,49 - #N is not a valid month 161,50 - #N is not a valid Date in #N #N 161,51 - #N is not a valid Hour value 161,52 - #N is not a valid Minute value 161,53 - #N is not a valid Second value 161,101 - January 161,102 - February 161,103 - March 161,104 - April 161,105 - May 161,106 - June 161,107 - July 161,108 - August 161,109 - September 161,110 - October 161,111 - November 161,112 - December ************************************************************************************** 162 - MISC DESIGN MODULE ERRORS ************************************************************************************** 162,1 - A Rack must be created in a STRU. 162,3 - There must be at least 1 Entry/Exit plane in a Rack. 162,5 - There must be at least 1 Travel plane in a Rack. 162,6 - Overhang must be positive. 162,7 - Length must be positive. 162,8 - Width must be positive. 162,10 - Please select an RPLG first and try again. 162,11 - Pipe Rack #N has no travel planes. 162,12 - Pipe Rack #N has no entry/exit planes. Are the purposes set correctly on the RPLAs? 162,13 - Invalid orientation for Rack. 162,14 - Must have RPLG to make pipe-rack. 162,15 - Must have RPLA to make plane of pipe-rack. 162,16 - RPLA #N has been deleted. 162,17 - Large number of Entry/Exit planes. 162,18 - Large number of Travel planes. 162,19 - Cannot copy constraints from Branch #N - it has none 162,20 - Cannot copy constraints to Branch #N - it is already constrained 162,21 - Cannot copy constraints to Branch #N - branches not compatible 162,22 - Place plane(s) at Top of Steel ? 162,23 - Place plane(s) at Bottom of Steel ? 162,24 - Picked element is not in a #N 162,25 - Cannot convert #N - it does not contain enough SCTNs 162,26 - Cannot convert #N - unable to determine elevations for planes 162,27 - Separation of planes too small 162,28 - Cannot convert #N - it is not orthogonal 162,40 - This utility will import a file produced by a P&ID system and create the pipe-work. 162,41 - Enter the full path of this import file. 162,42 - If you would like a copy of the log produced during import, 162,43 - choose a new file name for the log file. 162,44 - No Import File name specified 162,45 - Import File does not exist. 162,46 - Invalid File name for Log File 162,47 - Log File does not exist 162,48 - Cannot create pipe at this level in the hierarchy 162,49 - Could not open output file 162,50 - Element #N already exists. Modify to continue? 162,51 - #N errors and 162,52 - #N warnings detected during import 162,53 - Loading log file into viewer... 162,54 - Reading Line #N 162,55 - No name & STYP for component #N 162,56 - Component not in a branch. 162,57 - Ignoring copy of component #N 162,58 - at line #N 162,59 - Starting Import. 162,60 - Import Finished. 162,61 - Loading import file into memory... 162,62 - Input file is empty 162,63 - Checking for multi-way components... 162,64 - Creating macro to generate pipes... 162,65 - Reading pipe #N 162,66 - No PSPEC set for pipe #N 162,67 - Using default spec 162,68 - Pipe #N already exists - it will be modified 162,69 - Modifying pipe #N 162,70 - Creating pipe #N 162,71 - not assigned all parameters as specified :- 162,72 - Branch found that is not in a PIPE. Line #N 162,73 - IMPORT CANCELLED BY USER. 162,74 - Branch #N exists in different Pipe - it will be deleted 162,75 - Branch #N already exists - it will be modified 162,76 - No HREF set for branch #N 162,77 - No TREF set for branch #N 162,78 - Modifying branch #N 162,79 - Creating branch #N 162,80 - No bore set for pipe #N 162,81 - or branch #N 162,82 - Syntax error 162,83 - Pipe #N has no branches 162,84 - Name #N already used - New component will be unnamed 162,85 - Name #N was different type - It will be deleted 162,86 - Temporary name of Tee #N already used 162,87 - Name #N out of sequence - linking of constraints to it will be lost 162,88 - No name for #N present 162,89 - No bore or name specified for reducer 162,90 - No bore specified for reducer 162,91 - BORE keyword but no bore for reducer 162,92 - could not be selected using spec #N 162,93 - had question(s) unanswered. 162,94 - not selected :- 162,95 - Syntax Error: Line #N - is this the correct import file? 162,96 - Reading pipe heads and tails 162,97 - Could not set branch #N HREF to 162,98 - ** Position manually before routing * 162,99 - Could not set branch #N TREF to 162,100 - Unexpected error occurred during P&ID import 162,120 - No constrained branches to copy constraints from 162,121 - No unconstrained branches to copy constraints to ************************************************************************************** 190 - LASER MODULE ERRORS ************************************************************************************** 190,1 - PTCL API Version 190,2 - PTCL Driver Version 190,3 - Maximum number of models 190,4 - Maximum viewport width 190,5 - Maximum viewport height 190,6 - Front/back plane clipping 190,7 - Maximum views 190,8 - Maximum regions of interest 190,9 - Maximum highlight regions 190,10 - Maximum clip extrusions 190,11 - Maximum clash volumes 190,12 - Renderfast 190,13 - LowResEverywhere 190,14 - Volume test box 190,15 - Volume test cylinder 190,16 - Volume test sphere 190,17 - Volume test oblique 190,18 - Maximum view quality inside 190,19 - Maximum view quality outside 190,20 - LMI licence available 190,21 - No LMI licence available 190,22 - Viewport width 190,23 - Viewport height 190,24 - Background colour (R, G, B, A) 190,25 - Front and back clipping distances 190,26 - Front/back plane clipping ON 190,27 - Front/back plane clipping OFF 190,28 - region(s) of interest 190,29 - Region of interest 190,30 - XLength 190,31 - YLength 190,32 - ZLength 190,33 - at 190,34 - highlighted region(s) 190,35 - Highlighted region 190,36 - colour (R, G, B, A) 190,37 - clash region(s) 190,38 - Clash region 190,39 - model(s) 190,40 - Model 190,41 - Dabacon reference = 190,42 - Model ID 190,43 - Model string 190,44 - Driver connect string 190,45 - Model bounds 190,46 - CE is not an XGEOM ************************************************************************************** 191 - LASER MODULE ERRORS ************************************************************************************** 191,1 - LMI/PTCL Failed 191,2 - LMI/PTCL Function not supported 191,3 - Maximum number unlimited 191,4 - Vendor PTCL system out of resource 191,101 - Invalid PTCL Connection String 191,102 - Invalid PTCL User 191,103 - Invalid PTCL Password 191,104 - Invalid License For PTCL Server 191,105 - Invalid PTCL Server Not Found 191,106 - No PTCL Connection 191,201 - Invalid PTCL Model ID 191,202 - PTCL Model Not Found 191,203 - Attempting to access too many PTCL models at any one time 191,301 - Invalid PTCL ViewID 191,401 - PTCL Volume Test Empty 191,402 - PTCL Volume Test Occupied 191,403 - PTCL Volume Test Unknown 191,404 - PTCL Used Bounding Box 191,501 - PTCL Ray Missed 191,801 - LMI acquire licence failed 191,802 - LMI connect string empty 191,803 - PTCL driver dll load failed 191,804 - PTCL driver missing mandatory function(s) 191,805 - PTCL driver dll not loaded 191,806 - PTCL driver does not support the requested function or option 191,807 - Model string empty 191,896 - Invalid data returned from PTCL driver 191,898 - Programming logic at fault (i.e. "this cannot happen") 191,899 - Other LMI error 191,900 - LMI Server error - #N