• Replies 20 replies
  • Subscribers 2 subscribers
  • Views 72 views
  • Users 0 members are here
Options
Related

Insulation Bolting Sets

Alan Gregory
 
Parents
  • Thought I had covered this before but I can't find the post.
    The answer is to use 2 SBOLs
    One for your standard bolt and a second for the Insulation bolt.
    Add the additional lengths for washers etc to the XTRA of BITL of the second SBOL.

    In the BOLT spec you have an entry for standard bolt with BSEL set to DEF    and BLTREF to the standard SBOL
    Make a second entry identical to the previous but with a :suffix to the speco name and BSEL set to ISO  (or whatever) and BLTREF set to the Insulation SBOL

    Make sure that you set the Deault BSEL to DEF in the spec header.


    HEADING
    TYPE  NAME          BDIA   BTYP  BSEL  SHOP  CATREF  DETAIL                                        MATXT                     CMPREF  BLTREF
    DEFAULTS                                                                                          
    -     -             -      BOLT  DEF   =                                                          
    BOLT  */BBWMSCCD    12.70  BOLT  DEF   FALS  /BOLT   /STUDBOLT.+.2.HVY.HEX.NUTS.ASME.B1.1/B18.2.2  /ASTM.A320.GrL7/A194.Gr4  =0      /BBWMSCCD
    BOLT  */BBWMSCCD:I  12.70  BOLT  ISO   FALS  /BOLT   /STUDBOLT.+.2.HVY.HEX.NUTS.ASME.B1.1/B18.2.2  /ASTM.A320.GrL7/A194.Gr4  =0      /BBWMICCD

    In design where you require insulation sets you set the BSEL  of the Flanges Valves , wafers,etc to ISO (or whatever)
    This switches Isodraft to the Insulation Bolt for the length calculation
Reply
  • Thought I had covered this before but I can't find the post.
    The answer is to use 2 SBOLs
    One for your standard bolt and a second for the Insulation bolt.
    Add the additional lengths for washers etc to the XTRA of BITL of the second SBOL.

    In the BOLT spec you have an entry for standard bolt with BSEL set to DEF    and BLTREF to the standard SBOL
    Make a second entry identical to the previous but with a :suffix to the speco name and BSEL set to ISO  (or whatever) and BLTREF set to the Insulation SBOL

    Make sure that you set the Deault BSEL to DEF in the spec header.


    HEADING
    TYPE  NAME          BDIA   BTYP  BSEL  SHOP  CATREF  DETAIL                                        MATXT                     CMPREF  BLTREF
    DEFAULTS                                                                                          
    -     -             -      BOLT  DEF   =                                                          
    BOLT  */BBWMSCCD    12.70  BOLT  DEF   FALS  /BOLT   /STUDBOLT.+.2.HVY.HEX.NUTS.ASME.B1.1/B18.2.2  /ASTM.A320.GrL7/A194.Gr4  =0      /BBWMSCCD
    BOLT  */BBWMSCCD:I  12.70  BOLT  ISO   FALS  /BOLT   /STUDBOLT.+.2.HVY.HEX.NUTS.ASME.B1.1/B18.2.2  /ASTM.A320.GrL7/A194.Gr4  =0      /BBWMICCD

    In design where you require insulation sets you set the BSEL  of the Flanges Valves , wafers,etc to ISO (or whatever)
    This switches Isodraft to the Insulation Bolt for the length calculation
Children
No Data