• [QUOTE=franklintd;89602]:05.18-flustered:I am getting consistent crashes when running a bolt MTO report via ISODRAFT. Application exits with the following:

    Unhandled Database error 51 from DSAVE
    - Too many DSAVEs
    Last Dabacon routines called:
        db_cxx_get_reference =27577/2817 %FLAN [no name] in Db , number 3001
        db_cxx_get_integer =27577/2817
        DGETI =27577/2817
        DSAVE =27577/2817
        DSAVE =27577/2817
    This error was set in call 9533885 to DABKER

    The crash is not related to a specific item. This report has been run previously with no issues prior to update of fix 50 for 12.0.SP6.

    I have written 4 other various formats of reports, all with the same result. One of the application crashes expunged all users in the project, including the global satellite daemon.

    Any thoughts, suggestions or similar experiences?


    Above thread should come into this forum.

    I also have Same experiences.

    I Have added syntax in my boltrep form to split each of boltreport for every 300 lines instead of generating a full list of report with no luck!!!!

    My complete list contain of 4190 lines.

    Suspected the system could not write too many message the I'd tried to split message file with also every 300 lines with also no success!!!!

    The weard things is it always stuck in the list of pipe #842.

    Anyone has resolve this issue.

    Fyi, isodraft ver. 12.0.sp6.51
  • =27577/2817Is this reference is available.please navigate to this reference.I think it is flange element.
  • [QUOTE=ahfmech02;99917]Above thread should come into this forum.

    I also have Same experiences.

    I Have added syntax in my boltrep form to split each of boltreport for every 300 lines instead of generating a full list of report with no luck!!!!

    My complete list contain of 4190 lines.

    Suspected the system could not write too many message the I'd tried to split message file with also every 300 lines with also no success!!!!

    The weard things is it always stuck in the list of pipe #842.

    Anyone has resolve this issue.

    Fyi, isodraft ver. 12.0.sp6.51



    I got same error long back

    The reason is some catref or spref are missing

    try to find badref and resolve it before going to do bolting
  • =27577/2817Is this reference is available.please navigate to this reference.I think it is flange element.


    Nothing wrong with the reference. Everything is OK but that dbsave error still come out.

    I have tried using ver.12.0sp6 and its work flawlessly!
  • go for a dice check on complete project.

    fix fatal errors
  • [QUOTE=deva;99932]go for a dice check on complete project.

    fix fatal errors

    Unfortunately i have done this before I post this issue in this forum, no fatal error on dice report.

    Deva, do u have experience about this before? If not please try it first before post.
  • based on the information i tried to help you.

    i'm sorry.

    wait for a experts answer.
  • i got the same error
    no fatal error when DICE check, reference is undefine but dont understand what is that....Who is dabker??? crazy,...
  • [COLOR=#333333]The problem is that the Catref element is not defined in the spec. [/COLOR]
  • Hi All,

    Unhandled Database error 51 from DSAVE
    - Too many DSAVEs
    Last Dabacon routines called:
        db_cxx_get_reference =27577/2817 %FLAN [no name] in Db , number 3001
        db_cxx_get_integer =27577/2817
        DGETI =27577/2817
        DSAVE =27577/2817
        DSAVE =27577/2817
    This error was set in call 9533885 to DABKER

    I am getting this error. I am trying to extract an MTO report. I done the dice check for the whole project no database errors. When I started extracting report for the particular Site no issue. If I started extracting multiple sites I am getting this issue. Can anyone help me in it.