Rating issue

One of the smaller offices I am dealing with has a small problem with ratings in specifications

When they OUT a specification the heading comes out as below

$S-
$(  BORE UNITS MM    $)
$(  DISTANCE UNITS MM    $)

OLD SPECIFICATION /XXXXX600
VERSION 1211
MATREF =0
FLUREF =0
RATING 6000000000000.000
LINETYPE NULL
BSPEC =0
BLTM 'NEW'

This should be a CL600 specification

The file, in this state, will also not load back into SPECON with the rating line included.

I'm presuming that some setting is missing that converts units.

Any ideas where I should be looking?

Thanks in advance

One of the smaller offices I am dealing with has a small problem with ratings in specifications

When they OUT a specification the heading comes out as below

$S-
$(  BORE UNITS MM    $)
$(  DISTANCE UNITS MM    $)

OLD SPECIFICATION /XXXXX600
VERSION 1211
MATREF =0
FLUREF =0
RATING 6000000000000.000
LINETYPE NULL
BSPEC =0
BLTM 'NEW'

This should be a CL600 specification

The file, in this state, will also not load back into SPECON with the rating line included.

I'm presuming that some setting is missing that converts units.

Any ideas where I should be looking?

Thanks in advance