[COLOR=#333333]Recently i bought a system with the below configuration[/COLOR]
[COLOR=#333333]Operating System : Windows 7 Ultimate, 64bit[/COLOR]
[COLOR=#333333]Processor : Intel Core I5-6402P, 2.80GHz[/COLOR]
[COLOR=#333333]MotherBoard : Asus Prime B250-PRO[/COLOR]
[COLOR=#333333]Ram : 8GB[/COLOR]
[COLOR=#333333]Hard Disk : 1 TB[/COLOR]
[COLOR=#333333]After the OS and driver installations i have installed PDMS 12.0 SP6.[/COLOR]
[COLOR=#333333]After adding the sample project (SITE STABILIZER) in the system, while i rotate / pan / move by giving any of these commands system got stuck and it takes 10 to 15 secs to respond.[/COLOR]
[COLOR=#333333]but the NAVISWORKS well performing in the same system.[/COLOR]
[COLOR=#333333]Lastly i was using Pentium P4 system, for that older and lowest system configuration, the same PDMS 12.6 works very well.[/COLOR]
[COLOR=#333333]But for the higher end configuration, it got stuck-up.[/COLOR]
[COLOR=#333333]I formatted the system and reinstalled the software twice.[/COLOR]
[COLOR=#333333]but still the same problem arising.[/COLOR]
[COLOR=#333333]Please suggest how to trouble shooting this [/COLOR][COLOR=#417394]issue[/COLOR][COLOR=#333333].[/COLOR]
[COLOR=#333333]Is this anything related to hardware or software [/COLOR][COLOR=#417394]issue[/COLOR][COLOR=#333333] ?[/COLOR]
[COLOR=#333333]Recently i bought a system with the below configuration[/COLOR]
[COLOR=#333333]Operating System : Windows 7 Ultimate, 64bit[/COLOR]
[COLOR=#333333]Processor : Intel Core I5-6402P, 2.80GHz[/COLOR]
[COLOR=#333333]MotherBoard : Asus Prime B250-PRO[/COLOR]
[COLOR=#333333]Ram : 8GB[/COLOR]
[COLOR=#333333]Hard Disk : 1 TB[/COLOR]
[COLOR=#333333]After the OS and driver installations i have installed PDMS 12.0 SP6.[/COLOR]
[COLOR=#333333]After adding the sample project (SITE STABILIZER) in the system, while i rotate / pan / move by giving any of these commands system got stuck and it takes 10 to 15 secs to respond.[/COLOR]
[COLOR=#333333]but the NAVISWORKS well performing in the same system.[/COLOR]
[COLOR=#333333]Lastly i was using Pentium P4 system, for that older and lowest system configuration, the same PDMS 12.6 works very well.[/COLOR]
[COLOR=#333333]But for the higher end configuration, it got stuck-up.[/COLOR]
[COLOR=#333333]I formatted the system and reinstalled the software twice.[/COLOR]
[COLOR=#333333]but still the same problem arising.[/COLOR]
[COLOR=#333333]Please suggest how to trouble shooting this [/COLOR][COLOR=#417394]issue[/COLOR][COLOR=#333333].[/COLOR]
[COLOR=#333333]Is this anything related to hardware or software [/COLOR][COLOR=#417394]issue[/COLOR][COLOR=#333333] ?[/COLOR]
