Weld Gap / Weld Spool - Report

 

https://aveva.dev-verintcommunity.com/cfs-file/__key/communityserver-discussions-components-files/1598/202580aphWeldGapReport.pmlmac

 

 

https://aveva.dev-verintcommunity.com/cfs-file/__key/communityserver-discussions-components-files/1598/202582aphWeldGapReport.pmlmac

Error:-1 If  some  components does not have wall thickness then how to skip.

Error 2:-  if a branch have single elbow with both side pipe spool than in report only leave spool length of elbow is coming, arrive spool length not coming.

 

https://aveva.dev-verintcommunity.com/cfs-file/__key/communityserver-discussions-components-files/1598/202584aphWeldGapReport.pmlmac

Report was blank

Report was blank

For components that don't have wall thickness attributes, it will just show Blank / Empty Cell in the excel report. Ask your Admin to fix the components without wall thickness attributes if you want to show in the report otherwise it will be manual input.
If you mean that the report output is totally Blank, then might your Current Element (CE) does not have any piping components within its members & below.

thanks for sharing.
anyhow the macro didn't capture allowance provided for field Weld.

[QUOTE=fadzlijais;116697]thanks for sharing.
anyhow the macro didn't capture allowance provided for field Weld.

How did you assign the Field Weld allowance on the piping components?

Field Weld assign for weld with SKEY WF and loose flange allowance in option file set as 150mm as default.
Allowance attribute for weld will be set as 300mm for FFW with SKEY WF since as default the allowance will be 0.