Generally the Sphere diameter is kept same as the Pipe Diameter in NB.
You can refer the Catalogue /00WB200 in the Master project for reference.
The following weld types have symbols associated with them. They can therefore be shown on isometrics:
WS Site (erection) weld
WF Field-fitted weld
WW Shop (fabrication) weld
By default, all types of weld are shown on isometrics. You can use the WELDTYPE command to specify that:
• Only shop welds will be shown;
• Only site welds will be shown;
• No welds will be shown;
• All welded fittings will be shown as having shop welds.
Generally the Sphere diameter is kept same as the Pipe Diameter in NB.
You can refer the Catalogue /00WB200 in the Master project for reference.
The following weld types have symbols associated with them. They can therefore be shown on isometrics:
WS Site (erection) weld
WF Field-fitted weld
WW Shop (fabrication) weld
By default, all types of weld are shown on isometrics. You can use the WELDTYPE command to specify that:
• Only shop welds will be shown;
• Only site welds will be shown;
• No welds will be shown;
• All welded fittings will be shown as having shop welds.
